user/sven/linux.git/include/linux/timekeeper_internal.h, branch v4.14.91

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

time: Clean up CLOCK_MONOTONIC_RAW time handling

2017-06-21T05:13:59Z

Now that we fixed the sub-ns handling for CLOCK_MONOTONIC_RAW, remove the duplicitive tk->raw_time.tv_nsec, which can be stored in tk->tkr_raw.xtime_nsec (similarly to how its handled for monotonic time). Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Miroslav Lichvar Cc: Richard Cochran Cc: Prarit Bhargava Cc: Stephen Boyd Cc: Kevin Brodsky Cc: Will Deacon Cc: Daniel Mentz Tested-by: Daniel Mentz Signed-off-by: John Stultz

time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting

2017-06-20T08:41:50Z

Due to how the MONOTONIC_RAW accumulation logic was handled, there is the potential for a 1ns discontinuity when we do accumulations. This small discontinuity has for the most part gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW in their vDSO clock_gettime implementation, we've seen failures with the inconsistency-check test in kselftest. This patch addresses the issue by using the same sub-ns accumulation handling that CLOCK_MONOTONIC uses, which avoids the issue for in-kernel users. Since the ARM64 vDSO implementation has its own clock_gettime calculation logic, this patch reduces the frequency of errors, but failures are still seen. The ARM64 vDSO will need to be updated to include the sub-nanosecond xtime_nsec values in its calculation for this issue to be completely fixed. Signed-off-by: John Stultz Tested-by: Daniel Mentz Cc: Prarit Bhargava Cc: Kevin Brodsky Cc: Richard Cochran Cc: Stephen Boyd Cc: Will Deacon Cc: "stable #4 . 8+" Cc: Miroslav Lichvar Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner

time: Fix clock->read(clock) race around clocksource changes

2017-06-20T08:41:50Z

In tests, which excercise switching of clocksources, a NULL pointer dereference can be observed on AMR64 platforms in the clocksource read() function: u64 clocksource_mmio_readl_down(struct clocksource *c) { return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask; } This is called from the core timekeeping code via: cycle_now = tkr->read(tkr->clock); tkr->read is the cached tkr->clock->read() function pointer. When the clocksource is changed then tkr->clock and tkr->read are updated sequentially. The code above results in a sequential load operation of tkr->read and tkr->clock as well. If the store to tkr->clock hits between the loads of tkr->read and tkr->clock, then the old read() function is called with the new clock pointer. As a consequence the read() function dereferences a different data structure and the resulting 'reg' pointer can point anywhere including NULL. This problem was introduced when the timekeeping code was switched over to use struct tk_read_base. Before that, it was theoretically possible as well when the compiler decided to reload clock in the code sequence: now = tk->clock->read(tk->clock); Add a helper function which avoids the issue by reading tk_read_base->clock once into a local variable clk and then issue the read function via clk->read(clk). This guarantees that the read() function always gets the proper clocksource pointer handed in. Since there is now no use for the tkr.read pointer, this patch also removes it, and to address stopping the fast timekeeper during suspend/resume, it introduces a dummy clocksource to use rather then just a dummy read function. Signed-off-by: John Stultz Acked-by: Ingo Molnar Cc: Prarit Bhargava Cc: Richard Cochran Cc: Stephen Boyd Cc: stable Cc: Miroslav Lichvar Cc: Daniel Mentz Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner

clocksource: Use a plain u64 instead of cycle_t

2016-12-25T10:04:12Z

There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: John Stultz

time: Add history to cross timestamp interface supporting slower devices

2016-03-03T01:13:17Z

Another representative use case of time sync and the correlated clocksource (in addition to PTP noted above) is PTP synchronized audio. In a streaming application, as an example, samples will be sent and/or received by multiple devices with a presentation time that is in terms of the PTP master clock. Synchronizing the audio output on these devices requires correlating the audio clock with the PTP master clock. The more precise this correlation is, the better the audio quality (i.e. out of sync audio sounds bad). From an application standpoint, to correlate the PTP master clock with the audio device clock, the system clock is used as a intermediate timebase. The transforms such an application would perform are: System Clock <-> Audio clock System Clock <-> Network Device Clock [<-> PTP Master Clock] Modern Intel platforms can perform a more accurate cross timestamp in hardware (ART,audio device clock). The audio driver requires ART->system time transforms -- the same as required for the network driver. These platforms offload audio processing (including cross-timestamps) to a DSP which to ensure uninterrupted audio processing, communicates and response to the host only once every millsecond. As a result is takes up to a millisecond for the DSP to receive a request, the request is processed by the DSP, the audio output hardware is polled for completion, the result is copied into shared memory, and the host is notified. All of these operation occur on a millisecond cadence. This transaction requires about 2 ms, but under heavier workloads it may take up to 4 ms. Adding a history allows these slow devices the option of providing an ART value outside of the current interval. In this case, the callback provided is an accessor function for the previously obtained counter value. If get_system_device_crosststamp() receives a counter value previous to cycle_last, it consults the history provided as an argument in history_ref and interpolates the realtime and monotonic raw system time using the provided counter value. If there are any clock discontinuities, e.g. from calling settimeofday(), the monotonic raw time is interpolated in the usual way, but the realtime clock time is adjusted by scaling the monotonic raw adjustment. When an accessor function is used a history argument *must* be provided. The history is initialized using ktime_get_snapshot() and must be called before the counter values are read. Cc: Prarit Bhargava Cc: Richard Cochran Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Andy Lutomirski Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by: Thomas Gleixner Signed-off-by: Christopher S. Hall [jstultz: Fixed up cycles_t/cycle_t type confusion] Signed-off-by: John Stultz

time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge

2015-06-12T09:15:49Z

Currently, leapsecond adjustments are done at tick time. As a result, the leapsecond was applied at the first timer tick *after* the leapsecond (~1-10ms late depending on HZ), rather then exactly on the second edge. This was in part historical from back when we were always tick based, but correcting this since has been avoided since it adds extra conditional checks in the gettime fastpath, which has performance overhead. However, it was recently pointed out that ABS_TIME CLOCK_REALTIME timers set for right after the leapsecond could fire a second early, since some timers may be expired before we trigger the timekeeping timer, which then applies the leapsecond. This isn't quite as bad as it sounds, since behaviorally it is similar to what is possible w/ ntpd made leapsecond adjustments done w/o using the kernel discipline. Where due to latencies, timers may fire just prior to the settimeofday call. (Also, one should note that all applications using CLOCK_REALTIME timers should always be careful, since they are prone to quirks from settimeofday() disturbances.) However, the purpose of having the kernel do the leap adjustment is to avoid such latencies, so I think this is worth fixing. So in order to properly keep those timers from firing a second early, this patch modifies the ntp and timekeeping logic so that we keep enough state so that the update_base_offsets_now accessor, which provides the hrtimer core the current time, can check and apply the leapsecond adjustment on the second edge. This prevents the hrtimer core from expiring timers too early. This patch does not modify any other time read path, so no additional overhead is incurred. However, this also means that the leap-second continues to be applied at tick time for all other read-paths. Apologies to Richard Cochran, who pushed for similar changes years ago, which I resisted due to the concerns about the performance overhead. While I suspect this isn't extremely critical, folks who care about strict leap-second correctness will likely want to watch this. Potentially a -stable candidate eventually. Originally-suggested-by: Richard Cochran Reported-by: Daniel Bristot de Oliveira Reported-by: Prarit Bhargava Signed-off-by: John Stultz Cc: Richard Cochran Cc: Jan Kara Cc: Jiri Bohac Cc: Shuah Khan Cc: Ingo Molnar Link: http://lkml.kernel.org/r/1434063297-28657-4-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner

time: Rework debugging variables so they aren't global

2015-05-22T16:13:43Z

Ingo suggested that the timekeeping debugging variables recently added should not be global, and should be tied to the timekeeper's read_base. Thus this patch implements that suggestion. This version is different from the earlier versions as it keeps the variables in the timekeeper structure rather then in the tkr. Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Prarit Bhargava Cc: Richard Cochran Signed-off-by: John Stultz

hrtimer: Make offset update smarter

2015-04-22T15:06:49Z

On every tick/hrtimer interrupt we update the offset variables of the clock bases. That's silly because these offsets change very seldom. Add a sequence counter to the time keeping code which keeps track of the offset updates (clock_was_set()). Have a sequence cache in the hrtimer cpu bases to evaluate whether the offsets must be updated or not. This allows us later to avoid pointless cacheline pollution. Signed-off-by: Thomas Gleixner Reviewed-by: Preeti U Murthy Acked-by: Peter Zijlstra Cc: Viresh Kumar Cc: Marcelo Tosatti Cc: Frederic Weisbecker Cc: John Stultz Link: http://lkml.kernel.org/r/20150414203501.132820245@linutronix.de Signed-off-by: Thomas Gleixner Cc: John Stultz

time: Add timerkeeper::tkr_raw

2015-03-27T08:45:07Z

Introduce tkr_raw and make use of it. base_raw -> tkr_raw.base clock->{mult,shift} -> tkr_raw.{mult.shift} Kill timekeeping_get_ns_raw() in favour of timekeeping_get_ns(&tkr_raw), this removes all mono_raw special casing. Duplicate the updates to tkr_mono.cycle_last into tkr_raw.cycle_last, both need the same value. Signed-off-by: Peter Zijlstra (Intel) Acked-by: John Stultz Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20150319093400.422589590@infradead.org Signed-off-by: Ingo Molnar