user/sven/linux.git/include/linux/timekeeping.h, branch v4.15.11

Merge branch 'linus' into timers/urgent

2017-11-14T09:01:49Z

Get upstream changes so dependent patches can be applied.

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-11-14T01:56:58Z

Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...

timekeeping: Eliminate the stale declaration of ktime_get_raw_and_real_ts64()

2017-11-13T16:35:27Z

Commit ba26621e63ce got rid of ktime_get_raw_and_real_ts64(), but left its declaration behind. Remove it. Fixes: ba26621e63ce ("time: Remove duplicated code in ktime_get_raw_and_real()") Signed-off-by: Dou Liyang Signed-off-by: Thomas Gleixner Cc: Christopher S. Hall Cc: joelaf@google.com Cc: arnd@arndb.de Cc: gregkh@linuxfoundation.org Cc: john.stultz@linaro.org Cc: deepa.kernel@gmail.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1510552144-20831-1-git-send-email-douly.fnst@cn.fujitsu.com

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge branch 'fortglx/4.15/time' of https://git.linaro.org/people/john.stultz/linux into timers/core

2017-10-31T22:17:28Z

Pull timekeeping updates from John Stultz: - More y2038 work from Arnd Bergmann - A new mechanism to allow RTC drivers to specify the resolution of the RTC so the suspend/resume code can make informed decisions whether to inject the suspended time or not in case of fast suspend/resume cycles.

time: Move old timekeeping interfaces to timekeeping32.h

2017-10-30T22:17:20Z

The interfaces based on 'struct timespec' and 'unsigned long' seconds are no longer recommended for new code, and we are trying to migrate to ktime_t based interfaces and other y2038-safe variants. This moves all the legacy interfaces from linux/timekeeping.h into a new timekeeping32.h to better document this. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Miroslav Lichvar Cc: Richard Cochran Cc: Prarit Bhargava Cc: Stephen Boyd Signed-off-by: Arnd Bergmann Signed-off-by: John Stultz

timekeeping: Provide NMI safe access to clock realtime

2017-09-25T19:05:59Z

The configurable printk timestamping wants access to clock realtime. Right now there is no ktime_get_real_fast_ns() accessor because reading the monotonic base and the realtime offset cannot be done atomically. Contrary to boot time this offset can change during runtime and cause half updated readouts. struct tk_read_base was fully packed when the fast timekeeper access was implemented. commit ceea5e3771ed ("time: Fix clock->read(clock) race around clocksource changes") removed the 'read' function pointer from the structure, but of course left the comment stale. So now the structure can fit a new 64bit member w/o violating the cache line constraints. Add real_base to tk_read_base and update it in the fast timekeeper update sequence. Implement an accessor which follows the same scheme as the accessor to clock monotonic, but uses the new real_base to access clock real time. The runtime overhead for updating real_base is minimal as it just adds two cache hot values and stores them into an already dirtied cache line along with the other fast timekeeper updates. Signed-off-by: Thomas Gleixner Cc: Prarit Bhargava Cc: John Stultz Cc: Peter Zijlstra Link: https://lkml.kernel.org/r/1505757060-2004-3-git-send-email-prarit@redhat.com

time: Change k_clock clock_get() to use timespec64

2017-04-14T19:49:55Z

struct timespec is not y2038 safe on 32 bit machines. Replace uses of struct timespec with struct timespec64 in the kernel. The syscall interfaces themselves will be changed in a separate series. Signed-off-by: Deepa Dinamani Cc: y2038@lists.linaro.org Cc: john.stultz@linaro.org Cc: arnd@arndb.de Link: http://lkml.kernel.org/r/1490555058-4603-4-git-send-email-deepa.kernel@gmail.com Signed-off-by: Thomas Gleixner

time: Delete do_sys_setimeofday()

2017-04-14T19:49:54Z

struct timespec is not y2038 safe on 32 bit machines and needs to be replaced with struct timespec64. do_sys_timeofday() is just a wrapper function. Replace all calls to this function with direct calls to do_sys_timeofday64() instead and delete do_sys_timeofday(). Signed-off-by: Deepa Dinamani Cc: y2038@lists.linaro.org Cc: john.stultz@linaro.org Cc: arnd@arndb.de Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/r/1490555058-4603-2-git-send-email-deepa.kernel@gmail.com Signed-off-by: Thomas Gleixner

sched/headers, timekeeping: Move the timer tick function prototypes to

2017-03-03T00:45:25Z

Move the update_process_times() and xtime_update() prototypes to . Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar