user/sven/linux.git/include/linux/tty.h, branch v5.10.64

tty: Remove dead termiox code

2021-05-14T07:50:18Z

[ Upstream commit e0efb3168d34dc8c8c72718672b8902e40efff8f ] set_termiox() and the TCGETX handler bail out with -EINVAL immediately if ->termiox is NULL, but there are no code paths that can set ->termiox to a non-NULL pointer; and no such code paths seem to have existed since the termiox mechanism was introduced back in commit 1d65b4a088de ("tty: Add termiox") in v2.6.28. Similarly, no driver actually implements .set_termiox; and it looks like no driver ever has. Delete this dead code; but leave the definition of struct termiox in the UAPI headers intact. Signed-off-by: Jann Horn Link: https://lore.kernel.org/r/20201203020331.2394754-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

Commit 9bb48c82aced ("tty: implement write_iter") converted the tty layer to use write_iter. Fix the redirected_tty_write declaration also in n_tty and change the comparisons to use write_iter instead of write. also in n_tty and change the comparisons to use write_iter instead of write.

2021-01-27T10:55:30Z

commit 9f12e37cae44a96132fc3031535a0b165486941a upstream. [ Also moved the declaration of redirected_tty_write() to the proper location in a header file. The reason for the bug was the bogus extern declaration in n_tty.c silently not matching the changed definition in tty_io.c, and because it wasn't in a shared header file, there was no cross-checking of the declaration. Sami noticed because Clang's Control Flow Integrity checking ended up incidentally noticing the inconsistent declaration. - Linus ] Fixes: 9bb48c82aced ("tty: implement write_iter") Signed-off-by: Sami Tolvanen Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

tty: Fix ->session locking

2020-12-04T16:39:58Z

Currently, locking of ->session is very inconsistent; most places protect it using the legacy tty mutex, but disassociate_ctty(), __do_SAK(), tiocspgrp() and tiocgsid() don't. Two of the writers hold the ctrl_lock (because they already need it for ->pgrp), but __proc_set_tty() doesn't do that yet. On a PREEMPT=y system, an unprivileged user can theoretically abuse this broken locking to read 4 bytes of freed memory via TIOCGSID if tiocgsid() is preempted long enough at the right point. (Other things might also go wrong, especially if root-only ioctls are involved; I'm not sure about that.) Change the locking on ->session such that: - tty_lock() is held by all writers: By making disassociate_ctty() hold it. This should be fine because the same lock can already be taken through the call to tty_vhangup_session(). The tricky part is that we need to shorten the area covered by siglock to be able to take tty_lock() without ugly retry logic; as far as I can tell, this should be fine, since nothing in the signal_struct is touched in the `if (tty)` branch. - ctrl_lock is held by all writers: By changing __proc_set_tty() to hold the lock a little longer. - All readers that aren't holding tty_lock() hold ctrl_lock: By adding locking to tiocgsid() and __do_SAK(), and expanding the area covered by ctrl_lock in tiocspgrp(). Cc: stable@kernel.org Signed-off-by: Jann Horn Reviewed-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

gcc-10 warnings: fix low-hanging fruit

2020-05-04T16:16:37Z

Due to a bug-report that was compiler-dependent, I updated one of my machines to gcc-10. That shows a lot of new warnings. Happily they seem to be mostly the valid kind, but it's going to cause a round of churn for getting rid of them.. This is the really low-hanging fruit of removing a couple of zero-sized arrays in some core code. We have had a round of these patches before, and we'll have many more coming, and there is nothing special about these except that they were particularly trivial, and triggered more warnings than most. Signed-off-by: Linus Torvalds

serdev: ttyport: restore client ops on deregistration

2020-02-10T20:26:44Z

The serdev tty-port controller driver should reset the tty-port client operations also on deregistration to avoid a NULL-pointer dereference in case the port is later re-registered as a normal tty device. Note that this can only happen with tty drivers such as 8250 which have statically allocated port structures that can end up being reused and where a later registration would not register a serdev controller (e.g. due to registration errors or if the devicetree has been changed in between). Specifically, this can be an issue for any statically defined ports that would be registered by 8250 core when an 8250 driver is being unbound. Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver") Cc: stable # 4.11 Reported-by: Loic Poulain Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200210145730.22762-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

Merge 4.20-rc6 into tty-next

2018-12-10T09:17:45Z

We want the TTY changes in here as well. Signed-off-by: Greg Kroah-Hartman

tty: Don't block on IO when ldisc change is pending

2018-12-05T11:16:33Z

There might be situations where tty_ldisc_lock() has blocked, but there is already IO on tty and it prevents line discipline changes. It might theoretically turn into dead-lock. Basically, provide more priority to pending tty_ldisc_lock() than to servicing reads/writes over tty. User-visible issue was reported by Mikulas where on pa-risc with Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper locking in tty_reopen(). Cc: Jiri Slaby Reported-by: Mikulas Patocka Signed-off-by: Dmitry Safonov Signed-off-by: Greg Kroah-Hartman

USB: serial: console: fix reported terminal settings

2018-12-05T10:29:10Z

The USB-serial console implementation has never reported the actual terminal settings used. Despite storing the corresponding cflags in its struct console, these were never honoured on later tty open() where the tty termios would be left initialised to the driver defaults. Unlike the serial console implementation, the USB-serial code calls subdriver open() already at console setup. While calling set_termios() and write() before open() looks like it could work for some USB-serial drivers, others definitely do not expect this, so modelling this after serial core is going to be intrusive, if at all possible. Instead, use a (renamed) tty helper to save the termios data used at console setup so that the tty termios reflects the actual terminal settings after a subsequent tty open(). Note that the calls to tty_init_termios() (tty_driver_install()) and tty_save_termios() are serialised using the disconnect mutex. This specifically fixes a regression that was triggered by a recent change adding software flow control to the pl2303 driver: a getty trying to disable flow control while leaving the baud rate unchanged would now also set the baud rate to the driver default (prior to the flow-control change this had been a noop). Fixes: 7041d9c3f01b ("USB: serial: pl2303: add support for tx xon/xoff flow control") Cc: stable # 4.18 Cc: Florian Zumbiehl Reported-by: Jarkko Nikula Tested-by: Jarkko Nikula Acked-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

move compat handling of tty ioctls to tty_compat_ioctl()

2018-09-14T15:12:17Z

ioctls that are * callable only via tty_ioctl() * not driver-specific * not demand data structure conversions * either always need passing arg as is or always demand compat_ptr() get intercepted in tty_compat_ioctl() from the very beginning and redirecter to tty_ioctl(). As the result, their entries in fs/compat_ioctl.c (some of those had been missing, BTW) got removed, as well as n_tty_compat_ioctl_helper() (now it's never called with any cmd it would accept). Signed-off-by: Al Viro

Merge tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2018-06-05T23:14:12Z

Pull USB and PHY updates from Greg KH: "Here is the big USB pull request for 4.18-rc1. Lots of stuff here, the highlights are: - phy driver updates and new additions - usual set of xhci driver updates - normal set of musb updates - gadget driver updates and new controllers - typec work, it's getting closer to getting fully out of the staging portion of the tree. - lots of minor cleanups and bugfixes. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue" xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers xhci: Allow more than 32 quirks usb: xhci: force all memory allocations to node selftests: add test for USB over IP driver USB: typec: fsusb302: no need to check return value of debugfs_create_dir() USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions USB: dwc3: no need to check return value of debugfs_create functions USB: dwc2: no need to check return value of debugfs_create functions USB: core: no need to check return value of debugfs_create functions USB: chipidea: no need to check return value of debugfs_create functions USB: ehci-hcd: no need to check return value of debugfs_create functions USB: fhci-hcd: no need to check return value of debugfs_create functions USB: fotg210-hcd: no need to check return value of debugfs_create functions USB: imx21-hcd: no need to check return value of debugfs_create functions ...