user/sven/linux.git/include/linux/tty_driver.h, branch v5.14.1

tty: remove unused tty_throttle

2021-05-13T16:29:11Z

The last user was removed in commit e91e52e42814 (n_tty: Fix stuck throttled driver) in 2013. So remove exported tty_throttle completely. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210510065923.5112-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: make tty_operations::chars_in_buffer return uint

2021-05-13T16:29:11Z

tty_operations::chars_in_buffer is another hook which is expected to return values >= 0. So make it explicit by the return type too -- use unsigned int. Signed-off-by: Jiri Slaby Acked-By: Anton Ivanov Acked-by: David Sterba Cc: Jeff Dike Cc: Richard Weinberger Cc: Arnd Bergmann Cc: Samuel Iglesias Gonsalvez Cc: Jens Taprogge Cc: Karsten Keil Cc: Ulf Hansson Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Jiri Kosina Cc: Shawn Guo Cc: Sascha Hauer Cc: Oliver Neukum Cc: Felipe Balbi Cc: Mathias Nyman Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Link: https://lore.kernel.org/r/20210505091928.22010-27-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: make tty_operations::write_room return uint

2021-05-13T15:03:20Z

Line disciplines expect a positive value or zero returned from tty->ops->write_room (invoked by tty_write_room). So make this assumption explicit by using unsigned int as a return value. Both of tty->ops->write_room and tty_write_room. Signed-off-by: Jiri Slaby Acked-by: Laurentiu Tudor Acked-by: Alex Elder Acked-by: Max Filippov # xtensa Acked-by: David Sterba Acked-By: Anton Ivanov Acked-by: Geert Uytterhoeven Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Jeff Dike Cc: Richard Weinberger Cc: Chris Zankel Cc: Arnd Bergmann Cc: Samuel Iglesias Gonsalvez Cc: Jens Taprogge Cc: Karsten Keil Cc: Scott Branden Cc: Ulf Hansson Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: David Lin Cc: Johan Hovold Cc: Jiri Kosina Cc: Shawn Guo Cc: Sascha Hauer Cc: Oliver Neukum Cc: Felipe Balbi Cc: Mathias Nyman Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Link: https://lore.kernel.org/r/20210505091928.22010-23-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: cumulate and document tty_struct::flow* members

2021-05-13T14:57:16Z

Group the flow flags under a single struct called flow. The new struct contains 'stopped' and 'tco_stopped' bools which used to be bits in a bitfield. The struct also contains the lock protecting them to potentially share the same cache line. Note that commit c545b66c6922b (tty: Serialize tcflow() with other tty flow control changes) added a padding to the original bitfield. It was for the bitfield to occupy a whole 64b word to avoid interferring stores on Alpha (cannot we evaporate this arch with weird implications to C code yet?). But it doesn't work as expected as the padding (tty_struct::unused) is aligned to a 8B boundary too and occupies some bytes from the next word. So make it reliable by: 1) setting __aligned of the struct -- that aligns the start, and 2) making 'unsigned long unused[0]' as the last member of the struct -- pads the end. This is also the perfect time to start the documentation of tty_struct where all this lives. So we start by documenting what these bools actually serve for. And why we do all the alignment dances. Only the few up-to-date information from the Theodore's comment made it into this new Kerneldoc comment. Signed-off-by: Jiri Slaby Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Jonathan Corbet Cc: Arnd Bergmann Cc: Ulf Hansson Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: Shawn Guo Cc: Sascha Hauer Cc: Vineet Gupta Cc: "Maciej W. Rozycki" Link: https://lore.kernel.org/r/20210505091928.22010-13-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: fix return value for unsupported ioctls

2021-04-10T08:36:34Z

Drivers should return -ENOTTY ("Inappropriate I/O control operation") when an ioctl isn't supported, while -EINVAL is used for invalid arguments. Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned -EINVAL when a tty driver did not implement the corresponding operations. Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a corresponding Fixes tag below. Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: Remove dead termiox code

2020-12-04T15:54:35Z

set_termiox() and the TCGETX handler bail out with -EINVAL immediately if ->termiox is NULL, but there are no code paths that can set ->termiox to a non-NULL pointer; and no such code paths seem to have existed since the termiox mechanism was introduced back in commit 1d65b4a088de ("tty: Add termiox") in v2.6.28. Similarly, no driver actually implements .set_termiox; and it looks like no driver ever has. Delete this dead code; but leave the definition of struct termiox in the UAPI headers intact. Signed-off-by: Jann Horn Link: https://lore.kernel.org/r/20201203020331.2394754-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman

tty_ioctl(): start taking TIOC[SG]SERIAL into separate methods

2018-09-14T15:19:30Z

->set_serial() and ->get_serial() resp., both taking tty and a kernel pointer to serial_struct. Signed-off-by: Al Viro

tty: replace ->proc_fops with ->proc_show

2018-05-16T05:24:30Z

Just set up the show callback in the tty_operations, and use proc_create_single_data to create the file without additional boilerplace code. Signed-off-by: Christoph Hellwig

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

pty: show associative slave of ptmx in fdinfo

2017-08-28T18:51:23Z

This patch adds "tty-index" field to /proc/PID/fdinfo/N if N specifies /dev/ptmx. The field shows the index of associative slave pts. Though a minor number is given for each pts instance, ptmx is not. It means there is no way in user-space to know the association between file descriptors for pts/n and ptmx. (n = 0, 1, ...) This is different from pipe. About pipe such association can be solved by inode of pipefs. Providing the way to know the association between pts/n and ptmx helps users understand the status of running system. lsof can utilize this field. Signed-off-by: Masatake YAMATO Signed-off-by: Greg Kroah-Hartman