user/sven/linux.git/include/linux/usb.h, branch v2.6.34.6

USB: fix usbmon and DMA mapping for scatter-gather URBs

2010-07-05T18:22:07Z

commit ff9c895f07d36193c75533bda8193bde8ca99d02 upstream. This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: rename usb_buffer_alloc() and usb_buffer_free()

2010-04-30T16:25:12Z

For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. [added compatibility macros so we can convert things easier - gregkh] Signed-off-by: Daniel Mack Cc: Alan Stern Cc: Pedro Ribeiro Signed-off-by: Greg Kroah-Hartman

USB: Fix usb_fill_int_urb for SuperSpeed devices

2010-03-19T14:24:23Z

USB 3 and Wireless USB specify a logarithmic encoding of the endpoint interval that matches the USB 2 specification. usb_fill_int_urb() didn't know that and was filling in the interval as if it was USB 1.1. Fix usb_fill_int_urb() for SuperSpeed devices, but leave the wireless case alone, because David Vrabel wants to keep the old encoding. Update the struct urb kernel doc to note that SuperSpeed URBs must have urb->interval specified in microframes. Add a missing break statement in the usb_submit_urb() interrupt URB checking, since wireless USB and SuperSpeed USB encode urb->interval differently. This allows xHCI roothubs to actually register with khubd. Signed-off-by: Matthew Wilcox Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

Driver core: create lock/unlock functions for struct device

2010-03-08T01:04:52Z

In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner Cc: Jean Delvare Cc: Dave Young Cc: Ming Lei Cc: Jiri Kosina Cc: Phil Carmody Cc: Arjan van de Ven Cc: Cornelia Huck Cc: Rafael J. Wysocki Cc: Pavel Machek Cc: Len Brown Cc: Magnus Damm Cc: Alan Stern Cc: Randy Dunlap Cc: Stefan Richter Cc: David Brownell Cc: Vegard Nossum Cc: Jesse Barnes Cc: Alex Chiang Cc: Kenji Kaneshige Cc: Andrew Morton Cc: Andrew Patterson Cc: Yu Zhao Cc: Dominik Brodowski Cc: Samuel Ortiz Cc: Wolfram Sang Cc: CHENG Renquan Cc: Oliver Neukum Cc: Frans Pop Cc: David Vrabel Cc: Kay Sievers Cc: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

USB: Extend and neaten dbg macros

2010-03-02T22:54:59Z

Add format/argument validation for #ifndef DEBUG dbg macro Neaten dbg macro definitions Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman

USB: convert to the runtime PM framework

2010-03-02T22:54:12Z

This patch (as1329) converts the USB stack over to the PM core's runtime PM framework. This involves numerous changes throughout usbcore, especially to hub.c and driver.c. Perhaps the most notable change is that CONFIG_USB_SUSPEND now depends on CONFIG_PM_RUNTIME instead of CONFIG_PM. Several fields in the usb_device and usb_interface structures are no longer needed. Some code which used to depend on CONFIG_USB_PM now depends on CONFIG_USB_SUSPEND (requiring some rearrangement of header files). The only visible change in behavior should be that following a system sleep (resume from RAM or resume from hibernation), autosuspended USB devices will be resumed just like everything else. They won't remain suspended. But if they aren't in use then they will naturally autosuspend again in a few seconds. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: implement usb_enable_autosuspend

2010-03-02T22:54:10Z

This patch (as1326) adds usb_enable_autosuspend() and usb_disable_autosuspend() routines for use by drivers. If a driver knows that its device can handle suspends and resumes correctly, it can enable autosuspend all by itself. This is equivalent to the user writing "auto" to the device's power/level attribute. The implementation differs slightly from what it used to be. Now autosuspend is disabled simply by doing usb_autoresume_device() (to increment the usage counter) and enabled by doing usb_autosuspend_device() (to decrement the usage counter). The set_level() attribute method is updated to use the new routines, and the USB Power-Management documentation is updated. The patch adds a usb_enable_autosuspend() call to the hub driver's probe routine, allowing the special-case code for hubs in quirks.c to be removed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: implement non-tree resume ordering constraints for PCI host controllers

2010-02-26T19:39:12Z

This patch (as1331) adds non-tree ordering constraints needed for proper resume of PCI USB host controllers from hibernation. The main issue is that non-high-speed devices must not be resumed before the high-speed root hub, because it is the ehci_bus_resume() routine which takes care of handing the device connection over to the companion controller. If the device resume is attempted before the handover then the device won't be found and it will be treated as though it had disconnected. The patch adds a new field to the usb_bus structure; for each full/low-speed bus this field will contain a pointer to the companion high-speed bus (if one exists). It is used during normal device resume; if the hs_companion pointer isn't NULL then we wait for the root-hub device on the hs_companion bus. A secondary issue is that an EHCI controlller shouldn't be resumed before any of its companions. On some machines I have observed handovers failing if the companion controller is reinitialized after the handover. Thus, the EHCI resume routine must wait for the companion controllers to be resumed. The patch also fixes a small bug in usb_hcd_pci_probe(); an error path jumps to the wrong label, causing a memory leak. [rjw: Fixed compilation for CONFIG_PM_SLEEP unset.] Signed-off-by: Alan Stern Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki

USB: Fix duplicate sysfs problem after device reset.

2010-01-20T23:24:35Z

Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp Tested-by: Borislav Petkov Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: Refactor code to find alternate interface settings.

2009-12-11T19:55:27Z

Refactor out the code to find alternate interface settings into usb_find_alt_setting(). Print a debugging message and return null if the alt setting is not found. While we're at it, correct a bug in the refactored code. The interfaces in the configuration's interface cache are not necessarily in numerical order, so we can't just use the interface number as an array index. Loop through the interface caches, looking for the correct interface. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman