user/sven/linux.git/include/linux/usb.h, branch v3.9

USB: add usb_hcd_{start,end}_port_resume

2013-01-25T23:06:01Z

This patch (as1649) adds a mechanism for host controller drivers to inform usbcore when they have begun or ended resume signalling on a particular root-hub port. The core will then make sure that the root hub does not get runtime-suspended while the port resume is going on. Since commit 596d789a211d134dc5f94d1e5957248c204ef850 (USB: set hub's default autosuspend delay as 0), the system tries to suspend hubs whenever they aren't in use. While a root-hub port is being resumed, the root hub does not appear to be in use. Attempted runtime suspends fail because of the ongoing port resume, but the PM core just keeps on trying over and over again. We want to prevent this wasteful effort. Signed-off-by: Alan Stern Tested-by: Ming Lei Signed-off-by: Greg Kroah-Hartman

USB: add USB_DEVICE_INTERFACE_CLASS macro

2012-10-31T19:58:11Z

Matching on device and interface class with with unspecified subclass and protocol is sometimes useful. This is slightly different from USB_DEVICE_AND_INTERFACE_INFO which requires the full interface class/subclass/protocol triplet. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

USB: speed up usb_bus_resume()

2012-10-24T21:51:22Z

This patch (as1620) speeds up USB root-hub resumes in the common case where every enabled port has its suspend feature set (which currently will be true for every runtime resume of the root hub). If all the enabled ports are suspended then resuming the root hub won't resume any of the downstream devices. In this case there's no need for a Resume Recovery delay, because that delay is meant to give devices a chance to get ready for active use. To keep track of the port suspend features, the patch adds a "port_is_suspended" flag to struct usb_device. This has to be tracked separately from the device's state; it's entirely possible for a USB-2 device to be suspended while the suspend feature on its parent port is clear. The reason is that devices will go into suspend whenever their parent hub does. Signed-off-by: Alan Stern Reviewed-by: Peter Chen Tested-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

USB: hub_for_each_child should skip unconnected ports

2012-10-24T21:51:21Z

This patch (as1619) improves the interface to the "hub_for_each_child" macro. The name clearly suggests that the macro iterates over child devices; it does not suggest that the loop will also iterate over unnconnected ports. The patch changes the macro so that it will skip over unconnected ports and iterate only the actual child devices. The two existing call sites are updated to avoid testing for a NULL child pointer, which is now unnecessary. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: update documentation for URB_ISO_ASAP

2012-10-22T18:10:24Z

This patch (as1611) updates the USB documentation and kerneldoc to give a more precise meaning for the URB_ISO_ASAP flag and to explain more of the details of scheduling for isochronous URBs. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: usb.h: remove dbg() macro

2012-10-17T18:16:13Z

There are no users of this macro anymore in the kernel tree, so finally delete it. Signed-off-by: Greg Kroah-Hartman

usb/acpi: Use ACPI methods to power off ports.

2012-09-10T20:04:01Z

Upcoming Intel systems will have an ACPI method to control whether a USB port can be completely powered off. The implication of powering off a USB port is that the device and host sees a physical disconnect, and subsequent port connections and remote wakeups will be lost. Add a new function, usb_acpi_power_manageable(), that can be used to find whether the usb port has ACPI power resources that can be used to power on and off the port on these machines. Also add a new function called usb_acpi_set_power_state() that controls the port power via these ACPI methods. When the USB core calls into the xHCI hub driver to power off a port, check whether the port can be completely powered off via this new ACPI mechanism. If so, call into these new ACPI methods. Also use the ACPI methods when the USB core asks to power on a port. Signed-off-by: Lan Tianyu Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

usb/acpi: Store info on device removability.

2012-09-10T20:04:01Z

In the upcoming USB port power off patches, we need to know whether a USB port can ever see a disconnect event. Often USB ports are internal to a system, and users can't disconnect USB devices from that port. Sometimes those ports will remain empty, because the OEM chose not to connect an internal USB device to that port. According to ACPI Spec 9.13, PLD indicates whether USB port is user visible and _UPC indicates whether a USB device can be connected to the USB port (we'll call this "connectible"). Here's a matrix of the possible combinations: Visible Connectible Name Example ------------------------------------------------------------------------- Yes No Unknown (Invalid state.) Yes Yes Hot-plug USB ports on the outside of a laptop. A user could freely connect and disconnect USB devices. No Yes Hard-wired A USB modem hard-wired to a port on the inside of a laptop. No No Not used The port is internal to the system and will remain empty. Represent each of these four states with an enum usb_port_connect_type. The four states are USB_PORT_CONNECT_TYPE_UNKNOWN, USB_PORT_CONNECT_TYPE_HOT_PLUG, USB_PORT_CONNECT_TYPE_HARD_WIRED, and USB_PORT_NOT_USED. When we get the USB port's acpi_handle, store the state in connect_type in struct usb_port. Signed-off-by: Lan Tianyu Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

usb: move children to struct usb_port

2012-09-10T19:59:42Z

The usb_device structure contains an array of usb_device "children". This array is only valid if the usb_device is a hub, so it makes no sense to store it there. Instead, store the usb_device child in its parent usb_port structure. Since usb_port is an internal USB core structure, add a new function to get the USB device child, usb_hub_find_child(). Add a new macro, usb_hub_get_each_child(), to iterate over all the children attached to a particular USB hub. Remove the printing the USB children array pointer from the usb-ip driver, since it's really not necessary. Acked-by: Alan Stern Signed-off-by: Lan Tianyu Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

USB: add USB_VENDOR_AND_INTERFACE_INFO() macro

2012-07-17T00:43:04Z

A lot of Broadcom Bluetooth devices provides vendor specific interface class and we are getting flooded by patches adding new device support. This change will help us enable support for any other Broadcom with vendor specific device that arrives in the future. Only the product id changes for those devices, so this macro would be perfect for us: { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) } Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan Acked-by: Henrik Rydberg Signed-off-by: Greg Kroah-Hartman