user/sven/linux.git/include/linux/usb.h, branch v4.14.16

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

usb: fix some references for /proc/bus/usb

2017-04-18T14:54:19Z

Since when we got rid of usbfs, the /proc/bus/usb is now elsewhere. Fix references for it. Signed-off-by: Mauro Carvalho Chehab Acked-by: Serge Hallyn Signed-off-by: Greg Kroah-Hartman

USB: core: add helpers to retrieve endpoints in reverse order

2017-03-23T12:53:16Z

Several drivers have implemented their endpoint look-up loops in such a way that they have picked the last endpoint descriptor of the specified type should more than one such descriptor exist. To avoid any regressions, add corresponding helpers to lookup endpoints by searching the endpoint descriptors in reverse order. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: core: add helpers to retrieve endpoints

2017-03-23T12:53:16Z

Many USB drivers iterate over the available endpoints to find required endpoints of a specific type and direction. Typically the endpoints are required for proper function and a missing endpoint should abort probe. To facilitate code reuse, add a helper to retrieve common endpoints (bulk or interrupt, in or out) and four wrappers to find a single endpoint. Note that the helpers are marked as __must_check to serve as a reminder to always verify that all expected endpoints are indeed present. This also means that any optional endpoints, typically need to be looked up through separate calls. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: separate out sysdev pointer from usb_bus

2017-03-23T07:20:21Z

For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann Signed-off-by: Sriram Dash Tested-by: Baolin Wang Tested-by: Brian Norris Tested-by: Alexander Sverdlin Tested-by: Vivek Gautam Signed-off-by: Mathias Nyman Signed-off-by: Peter Chen Cc: Felipe Balbi Cc: Grygorii Strashko Cc: Sinjan Kumar Cc: David Fisher Cc: Catalin Marinas Cc: "Thang Q. Nguyen" Cc: Yoshihiro Shimoda Cc: Stephen Boyd Cc: Bjorn Andersson Cc: Ming Lei Cc: Jon Masters Cc: Dann Frazier Cc: Peter Chen Cc: Leo Li Signed-off-by: Greg Kroah-Hartman

usb: fix a typo in usb_class_driver documentation

2016-10-24T12:36:25Z

replace usb_unregister_dev by usb_deregister_dev Signed-off-by: Amitesh Singh Signed-off-by: Greg Kroah-Hartman

USB: leave LPM alone if possible when binding/unbinding interface drivers

2016-05-03T21:32:07Z

When a USB driver is bound to an interface (either through probing or by claiming it) or is unbound from an interface, the USB core always disables Link Power Management during the transition and then re-enables it afterward. The reason is because the driver might want to prevent hub-initiated link power transitions, in which case the HCD would have to recalculate the various LPM parameters. This recalculation takes place when LPM is re-enabled and the new parameters are sent to the device and its parent hub. However, if the driver does not want to prevent hub-initiated link power transitions then none of this work is necessary. The parameters don't need to be recalculated, and LPM doesn't need to be disabled and re-enabled. It turns out that disabling and enabling LPM can be time-consuming, enough so that it interferes with user programs that want to claim and release interfaces rapidly via usbfs. Since the usbfs kernel driver doesn't set the disable_hub_initiated_lpm flag, we can speed things up and get the user programs to work by leaving LPM alone whenever the flag isn't set. And while we're improving the way disable_hub_initiated_lpm gets used, let's also fix its kerneldoc. Signed-off-by: Alan Stern Tested-by: Matthew Giassa CC: Mathias Nyman CC: Signed-off-by: Greg Kroah-Hartman

usb: core: hub: hub_port_init lock controller instead of bus

2016-04-28T19:40:46Z

The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [] schedule+0x37/0x90 [] usb_kill_urb+0x8d/0xd0 [] ? wake_up_atomic_t+0x30/0x30 [] usb_start_wait_urb+0xbe/0x150 [] usb_control_msg+0xbc/0xf0 [] hub_port_init+0x51e/0xb70 [] hub_event+0x817/0x1570 [] process_one_work+0x1ff/0x620 [] ? process_one_work+0x15f/0x620 [] worker_thread+0x64/0x4b0 [] ? rescuer_thread+0x390/0x390 [] kthread+0x105/0x120 [] ? kthread_create_on_node+0x200/0x200 [] ret_from_fork+0x3f/0x70 [] ? kthread_create_on_node+0x200/0x200 Call Trace: [] xhci_setup_device+0x53d/0xa40 [] xhci_address_device+0xe/0x10 [] hub_port_init+0x1bf/0xb70 [] ? trace_hardirqs_on+0xd/0x10 [] hub_event+0x817/0x1570 [] process_one_work+0x1ff/0x620 [] ? process_one_work+0x15f/0x620 [] worker_thread+0x64/0x4b0 [] ? rescuer_thread+0x390/0x390 [] kthread+0x105/0x120 [] ? kthread_create_on_node+0x200/0x200 [] ret_from_fork+0x3f/0x70 [] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge Cc: stable Acked-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

USB: correct intervals for SS+

2016-04-26T22:04:38Z

SS+ also expresses intervals in units of 125ms. Testing must be for SS or faster, not SS exactly. Signed-off-by: Oliver neukum Signed-off-by: Greg Kroah-Hartman

USB: LTM also for USB 3.1

2016-04-26T22:04:38Z

LTM is also defined for SS+. The correct test is to check for anything slower than SS not exactly SS. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman