user/sven/linux.git/include/linux/usb, branch v3.18.40

USB: EHCI: declare hostpc register as zero-length array

2016-07-12T12:47:09Z

[ Upstream commit 7e8b3dfef16375dbfeb1f36a83eb9f27117c51fd ] The HOSTPC extension registers found in some EHCI implementations form a variable-length array, with one element for each port. Therefore the hostpc field in struct ehci_regs should be declared as a zero-length array, not a single-element array. This fixes a problem reported by UBSAN. Signed-off-by: Alan Stern Reported-by: Wilfried Klaebe Tested-by: Wilfried Klaebe CC: Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: core: hub: hub_port_init lock controller instead of bus

2016-06-03T15:30:30Z

[ Upstream commit feb26ac31a2a5cb88d86680d9a94916a6343e9e6 ] The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [] schedule+0x37/0x90 [] usb_kill_urb+0x8d/0xd0 [] ? wake_up_atomic_t+0x30/0x30 [] usb_start_wait_urb+0xbe/0x150 [] usb_control_msg+0xbc/0xf0 [] hub_port_init+0x51e/0xb70 [] hub_event+0x817/0x1570 [] process_one_work+0x1ff/0x620 [] ? process_one_work+0x15f/0x620 [] worker_thread+0x64/0x4b0 [] ? rescuer_thread+0x390/0x390 [] kthread+0x105/0x120 [] ? kthread_create_on_node+0x200/0x200 [] ret_from_fork+0x3f/0x70 [] ? kthread_create_on_node+0x200/0x200 Call Trace: [] xhci_setup_device+0x53d/0xa40 [] xhci_address_device+0xe/0x10 [] hub_port_init+0x1bf/0xb70 [] ? trace_hardirqs_on+0xd/0x10 [] hub_event+0x817/0x1570 [] process_one_work+0x1ff/0x620 [] ? process_one_work+0x15f/0x620 [] worker_thread+0x64/0x4b0 [] ? rescuer_thread+0x390/0x390 [] kthread+0x105/0x120 [] ? kthread_create_on_node+0x200/0x200 [] ret_from_fork+0x3f/0x70 [] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge Cc: stable Acked-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: add quirk for devices with broken LPM

2016-01-22T17:24:44Z

[ Upstream commit ad87e03213b552a5c33d5e1e7a19a73768397010 ] Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by: Alan Stern Reported-by: Steinar H. Gunderson Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usbnet: Fix tx_bytes statistic running backward in cdc_ncm

2015-04-27T21:13:42Z

[ Upstream commit 7a1e890e2168e33fb62d84528e996b8b4b478fea ] cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by: Ben Hutchings Signed-off-by: Bjørn Mork Signed-off-by: Sasha Levin

usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME drivers

2015-04-27T21:13:41Z

[ Upstream commit 1e9e39f4a29857a396ac7b669d109f697f66695e ] Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings Tested-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

Revert "USB: serial: make bulk_out_size a lower limit"

2015-03-14T19:37:23Z

commit bc4b1f486fe69b86769e07c8edce472327a8462b upstream. This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" Signed-off-by: Johan Hovold Signed-off-by: Sasha Levin

USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)

2015-03-06T22:53:00Z

commit 074f9dd55f9cab1b82690ed7e44bcf38b9616ce0 upstream. Currently the USB stack assumes that all host controller drivers are capable of receiving wakeup requests from downstream devices. However, this isn't true for the isp1760-hcd driver, which means that it isn't safe to do a runtime suspend of any device attached to a root-hub port if the device requires wakeup. This patch adds a "cant_recv_wakeups" flag to the usb_hcd structure and sets the flag in isp1760-hcd. The core is modified to prevent a direct child of the root hub from being put into runtime suspend with wakeup enabled if the flag is set. Signed-off-by: Alan Stern Tested-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

2015-03-06T22:53:00Z

commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream. the following error pops up during "testusb -a -t 10" | musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128, f134e000/be842000 (bad dma) hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in hcd_buffer_alloc() returning memory which is 32 bytes aligned and it might by identified by buffer_offset() as another buffer. This means the buffer which is on a 32 byte boundary will not get freed, instead it tries to free another buffer with the error message. This patch fixes the issue by creating the smallest DMA buffer with the size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is smaller). This might be 32, 64 or even 128 bytes. The next three pools will have the size 128, 512 and 2048. In case the smallest pool is 128 bytes then we have only three pools instead of four (and zero the first entry in the array). The last pool size is always 2048 bytes which is the assumed PAGE_SIZE / 2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where we would end up with 8KiB buffer in case we have 16KiB pages. Instead I think it makes sense to have a common size(s) and extend them if there is need to. There is a BUILD_BUG_ON() now in case someone has a minalign of more than 128 bytes. Signed-off-by: Sebastian Andrzej Siewior Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usbnet: add a callback for set_rx_mode

2014-10-28T21:26:19Z

To delegate promiscuous mode and multicast filtering to the subdriver. Signed-off-by: Olivier Blin Signed-off-by: David S. Miller

usb: hcd: add generic PHY support

2014-09-29T15:54:02Z

Add the generic PHY support, analogous to the USB PHY support. Intended it to be used with the PCI EHCI/OHCI drivers and the xHCI platform driver. Signed-off-by: Sergei Shtylyov Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman