user/sven/linux.git/include/linux/usb, branch v4.4.148

usb: gadget: composite: fix incorrect handling of OS desc requests

2018-05-30T05:49:13Z

[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ] When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by: Chris Dickens Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align

2018-04-08T09:51:56Z

commit 16b114a6d7973cf027e4c2b23eae1076eaf98c25 upstream. USB spec specifies wMaxPacketSize to be little endian (as other properties), so when using this variable in the driver we should convert to the current CPU endianness if necessary. This patch also introduces usb_ep_align() which does always returns the aligned buffer size for an endpoint. This is useful to be used by USB requests allocator functions. Signed-off-by: Felipe F. Tonello Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: quirks: add control message delay for 1b1c:1b20

2018-03-18T10:17:53Z

commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich Signed-off-by: Greg Kroah-Hartman

cdc_ncm: Set NTB format again after altsetting switch for Huawei devices

2017-11-15T16:13:11Z

commit 2b02c20ce0c28974b44e69a2e2f5ddc6a470ad6f upstream. Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso Reported-and-tested-by: Christian Panton Reviewed-by: Bjørn Mork CC: Bjørn Mork CC: Christian Panton CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum Signed-off-by: David S. Miller Cc: Porto Rio Signed-off-by: Greg Kroah-Hartman

usb: Fix typo in the definition of Endpoint[out]Request

2017-07-15T09:57:45Z

commit 7cf916bd639bd26db7214f2205bccdb4b9306256 upstream. The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Handle extcon events properly

2017-05-14T11:32:56Z

commit a89b94b53371bbfa582787c2fa3378000ea4263d upstream. We're currently emulating the vbus and id interrupts in the OTGSC read API, but we also need to make sure that if we're handling the events with extcon that we don't enable the interrupts for those events in the hardware. Therefore, properly emulate this register if we're using extcon, but don't enable the interrupts. This allows me to get my cable connect/disconnect working properly without getting spurious interrupts on my device that uses an extcon for these two events. Acked-by: Peter Chen Cc: Greg Kroah-Hartman Cc: "Ivan T. Ivanov" Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk

2017-03-30T07:35:16Z

commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by: Samuel Thibault Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: core: hub: hub_port_init lock controller instead of bus

2017-03-26T10:13:16Z

commit feb26ac31a2a5cb88d86680d9a94916a6343e9e6 upstream. The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [] schedule+0x37/0x90 [] usb_kill_urb+0x8d/0xd0 [] ? wake_up_atomic_t+0x30/0x30 [] usb_start_wait_urb+0xbe/0x150 [] usb_control_msg+0xbc/0xf0 [] hub_port_init+0x51e/0xb70 [] hub_event+0x817/0x1570 [] process_one_work+0x1ff/0x620 [] ? process_one_work+0x15f/0x620 [] worker_thread+0x64/0x4b0 [] ? rescuer_thread+0x390/0x390 [] kthread+0x105/0x120 [] ? kthread_create_on_node+0x200/0x200 [] ret_from_fork+0x3f/0x70 [] ? kthread_create_on_node+0x200/0x200 Call Trace: [] xhci_setup_device+0x53d/0xa40 [] xhci_address_device+0xe/0x10 [] hub_port_init+0x1bf/0xb70 [] ? trace_hardirqs_on+0xd/0x10 [] hub_event+0x817/0x1570 [] process_one_work+0x1ff/0x620 [] ? process_one_work+0x15f/0x620 [] worker_thread+0x64/0x4b0 [] ? rescuer_thread+0x390/0x390 [] kthread+0x105/0x120 [] ? kthread_create_on_node+0x200/0x200 [] ret_from_fork+0x3f/0x70 [] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge Cc: stable Acked-by: Mathias Nyman Signed-off-by: Sumit Semwal [sumits: minor merge conflict resolution for linux-4.4.y] Signed-off-by: Greg Kroah-Hartman

USB: EHCI: declare hostpc register as zero-length array

2016-07-27T16:47:28Z

commit 7e8b3dfef16375dbfeb1f36a83eb9f27117c51fd upstream. The HOSTPC extension registers found in some EHCI implementations form a variable-length array, with one element for each port. Therefore the hostpc field in struct ehci_regs should be declared as a zero-length array, not a single-element array. This fixes a problem reported by UBSAN. Signed-off-by: Alan Stern Reported-by: Wilfried Klaebe Tested-by: Wilfried Klaebe Signed-off-by: Greg Kroah-Hartman

net: cdc_ncm: avoid changing RX/TX buffers on MTU changes

2015-12-24T03:52:08Z

NCM buffer sizes are negotiated with the device independently of the network device MTU. The RX buffers are allocated by the usbnet framework based on the rx_urb_size value set by cdc_ncm. A single RX buffer can hold a number of MTU sized packets. The default usbnet change_mtu ndo only modifies rx_urb_size if it is equal to hard_mtu. And the cdc_ncm driver will set rx_urb_size and hard_mtu independently of each other, based on dwNtbInMaxSize and dwNtbOutMaxSize respectively. It was therefore assumed that usbnet_change_mtu() would never touch rx_urb_size. This failed to consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens to be equal. Fix by implementing an NCM specific change_mtu ndo, modifying the netdev MTU without touching the buffer size settings. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller