user/sven/linux.git/include/linux/usb, branch v4.9.243

usb: gadget: Fix issue with config_ep_by_speed function

2020-06-30T19:38:27Z

[ Upstream commit 5d363120aa548ba52d58907a295eee25f8207ed2 ] This patch adds new config_ep_by_speed_and_alt function which extends the config_ep_by_speed about alt parameter. This additional parameter allows to find proper usb_ss_ep_comp_descriptor. Problem has appeared during testing f_tcm (BOT/UAS) driver function. f_tcm function for SS use array of headers for both BOT/UAS alternate setting: static struct usb_descriptor_header *uasp_ss_function_desc[] = { (struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL, }; The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS. During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object. Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to uasp_ss_bi_desc. This is due to the fact that it searches endpoint based on endpoint address: for_each_ep_desc(speed_desc, d_spd) { chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; if (chosen_desc->bEndpoitAddress == _ep->address) goto ep_found; } And in result it uses the descriptor from BOT alternate setting instead UAS. Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot. Signed-off-by: Jayshri Pawar Signed-off-by: Pawel Laszczak Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

USB: serial: ir-usb: fix link-speed handling

2020-02-05T13:05:35Z

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream. Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header. This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl). Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Cc: stable # 2.6.27 Cc: Felipe Balbi Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: gadget: core: unmap request from DMA only if previously mapped

2019-11-16T09:29:37Z

commit 31fe084ffaaf8abece14f8ca28e5e3b4e2bf97b6 upstream. In the SG case this is already handled since a non-zero request->num_mapped_sgs is a clear indicator that dma_map_sg() had been called. While it would be nice to do the same for the singly mapped case by simply checking for non-zero request->dma, it's conceivable that 0 is a valid dma_addr_t handle. Hence add a flag 'dma_mapped' to struct usb_request and use this to determine the need to call dma_unmap_single(). Otherwise, if a request is not DMA mapped then the result of calling usb_request_unmap_request() would safely be a no-op. Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: composite: fix incorrect handling of OS desc requests

2018-05-25T14:13:04Z

[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ] When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by: Chris Dickens Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: quirks: add control message delay for 1b1c:1b20

2018-03-18T10:18:56Z

commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich Signed-off-by: Greg Kroah-Hartman

usbnet: fix alignment for frames with no ethernet header

2017-12-16T15:25:45Z

[ Upstream commit a4abd7a80addb4a9547f7dfc7812566b60ec505c ] The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

cdc_ncm: Set NTB format again after altsetting switch for Huawei devices

2017-11-15T14:53:17Z

commit 2b02c20ce0c28974b44e69a2e2f5ddc6a470ad6f upstream. Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso Reported-and-tested-by: Christian Panton Reviewed-by: Bjørn Mork CC: Bjørn Mork CC: Christian Panton CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum Signed-off-by: David S. Miller Cc: Porto Rio Signed-off-by: Greg Kroah-Hartman

usb: Fix typo in the definition of Endpoint[out]Request

2017-07-12T13:01:03Z

commit 7cf916bd639bd26db7214f2205bccdb4b9306256 upstream. The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Handle extcon events properly

2017-05-14T12:00:18Z

commit a89b94b53371bbfa582787c2fa3378000ea4263d upstream. We're currently emulating the vbus and id interrupts in the OTGSC read API, but we also need to make sure that if we're handling the events with extcon that we don't enable the interrupts for those events in the hardware. Therefore, properly emulate this register if we're using extcon, but don't enable the interrupts. This allows me to get my cable connect/disconnect working properly without getting spurious interrupts on my device that uses an extcon for these two events. Acked-by: Peter Chen Cc: Greg Kroah-Hartman Cc: "Ivan T. Ivanov" Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk

2017-03-30T07:41:24Z

commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by: Samuel Thibault Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman