user/sven/linux.git/include/linux/usb, branch v4.9.74

usbnet: fix alignment for frames with no ethernet header

2017-12-16T15:25:45Z

[ Upstream commit a4abd7a80addb4a9547f7dfc7812566b60ec505c ] The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

cdc_ncm: Set NTB format again after altsetting switch for Huawei devices

2017-11-15T14:53:17Z

commit 2b02c20ce0c28974b44e69a2e2f5ddc6a470ad6f upstream. Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso Reported-and-tested-by: Christian Panton Reviewed-by: Bjørn Mork CC: Bjørn Mork CC: Christian Panton CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum Signed-off-by: David S. Miller Cc: Porto Rio Signed-off-by: Greg Kroah-Hartman

usb: Fix typo in the definition of Endpoint[out]Request

2017-07-12T13:01:03Z

commit 7cf916bd639bd26db7214f2205bccdb4b9306256 upstream. The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Handle extcon events properly

2017-05-14T12:00:18Z

commit a89b94b53371bbfa582787c2fa3378000ea4263d upstream. We're currently emulating the vbus and id interrupts in the OTGSC read API, but we also need to make sure that if we're handling the events with extcon that we don't enable the interrupts for those events in the hardware. Therefore, properly emulate this register if we're using extcon, but don't enable the interrupts. This allows me to get my cable connect/disconnect working properly without getting spurious interrupts on my device that uses an extcon for these two events. Acked-by: Peter Chen Cc: Greg Kroah-Hartman Cc: "Ivan T. Ivanov" Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk

2017-03-30T07:41:24Z

commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by: Samuel Thibault Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: gadget: fix request length error for isoc transfer

2017-01-12T10:39:19Z

commit 982555fc26f9d8bcdbd5f9db0378fe0682eb4188 upstream. For isoc endpoint descriptor, the wMaxPacketSize is not real max packet size (see Table 9-13. Standard Endpoint Descriptor, USB 2.0 specifcation), it may contain the number of packet, so the real max packet should be ep->desc->wMaxPacketSize && 0x7ff. Cc: Felipe F. Tonello Cc: Felipe Balbi Fixes: 16b114a6d797 ("usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_aligna") Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

NET: usb: cdc_mbim: add quirk for supporting Telit LE922A

2016-12-08T18:02:25Z

Telit LE922A MBIM based composition does not work properly with altsetting toggle done in cdc_ncm_bind_common. This patch adds CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE quirk to avoid this procedure that, instead, is mandatory for other modems. Signed-off-by: Daniele Palmas Reviewed-by: Bjørn Mork Signed-off-by: David S. Miller

usb: gadget: add a new quirk to avoid skb_reserve in u_ether.c

2016-08-31T07:06:03Z

Some platforms (e.g. USB-DMAC on R-Car SoCs) has memory alignment restriction. If memory alignment is not match, the usb peripheral driver decides not to use the DMA controller. Then, the performance is not good. In the case of u_ether.c, since it calls skb_reserve() in rx_submit(), it is possible to cause memory alignment mismatch. So, this patch adds a new quirk "quirk_avoids_skb_reserve" to avoid skb_reserve() calling in u_ether.c to improve performance. A peripheral driver will set this flag and network gadget drivers (e.g. f_ncm.c) will reference the flag via gadget_avoids_skb_reserve(). Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi

usb: gadget: composite: let USB functions process ctrl reqs in cfg0

2016-08-25T09:13:17Z

It can sometimes be necessary for gadget drivers to process non-standard control requests, which host devices can send without having sent USB_REQ_SET_CONFIGURATION. Therefore, the req_match() usb_function method is enhanced with the new parameter "config0". When a USB configuration is active, this parameter is false. When a non-core control request is processed in composite_setup(), without an active configuration, req_match() of the USB functions of all available configurations which implement this function, is called with config0=true. Then the control request gets processed by the first usb_function instance whose req_match() returns true. Signed-off-by: Felix Hädicke Signed-off-by: Felipe Balbi

usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align

2016-08-25T09:13:13Z

USB spec specifies wMaxPacketSize to be little endian (as other properties), so when using this variable in the driver we should convert to the current CPU endianness if necessary. This patch also introduces usb_ep_align() which does always returns the aligned buffer size for an endpoint. This is useful to be used by USB requests allocator functions. Signed-off-by: Felipe F. Tonello Signed-off-by: Felipe Balbi