Linux Kernel https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v5.12.7 2021-05-14T08:52:31Z 2021-05-14T08:52:31Z Badhri Jagan Sridharan badhri@google.com 2021-04-14T02:39:58Z urn:sha1:d7cd576b987f15b0587d5383dc41a6b4ba6ea890 [ Upstream commit 123086843372bc93d26f52edfb71dbf951cd2f17 ] >From PD Spec: The Sink Shall transition to Sink Standby before a positive or negative voltage transition of VBUS. During Sink Standby the Sink Shall reduce its power draw to pSnkStdby. This allows the Source to manage the voltage transition as well as supply sufficient operating current to the Sink to maintain PD operation during the transition. The Sink Shall complete this transition to Sink Standby within tSnkStdby after evaluating the Accept Message from the Source. The transition when returning to Sink operation from Sink Standby Shall be completed within tSnkNewPower. The pSnkStdby requirement Shall only apply if the Sink power draw is higher than this level. The above requirement needs to be met to prevent hard resets from port partner. Without the patch: (5V/3A during SNK_DISCOVERY all the way through explicit contract) [ 95.711984] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 95.712007] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 95.712017] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 95.837190] VBUS on [ 95.882075] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 95.882082] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 95.882086] polarity 1 [ 95.883151] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 95.883441] enable vbus discharge ret:0 [ 95.883445] Requesting mux state 1, usb-role 2, orientation 2 [ 95.883776] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 95.883879] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 96.038960] VBUS on [ 96.383939] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 96.383946] Setting voltage/current limit 5000 mV 3000 mA [ 96.383961] vbus=0 charge:=1 [ 96.386044] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 96.386309] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 96.394404] PD RX, header: 0x2161 [1] [ 96.394408] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 96.394410] PDO 1: type 0, 9000 mV, 2000 mA [] [ 96.394412] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 96.394416] Setting usb_comm capable false [ 96.395083] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 96.395089] Requesting PDO 1: 9000 mV, 2000 mA [ 96.395093] PD TX, header: 0x1042 [ 96.397404] PD TX complete, status: 0 [ 96.397424] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 96.400826] PD RX, header: 0x363 [1] [ 96.400829] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 96.400832] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 96.577315] PD RX, header: 0x566 [1] [ 96.577321] Setting voltage/current limit 9000 mV 2000 mA [ 96.578363] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 96.578370] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] With the patch: [ 168.398573] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 168.398605] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 168.398619] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 168.522348] VBUS on [ 168.568676] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 168.568684] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 168.568688] polarity 1 [ 168.569867] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 168.570158] enable vbus discharge ret:0 [ 168.570161] Requesting mux state 1, usb-role 2, orientation 2 [ 168.570504] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 168.570634] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 169.070689] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 169.070695] Setting voltage/current limit 5000 mV 3000 mA [ 169.070702] vbus=0 charge:=1 [ 169.072719] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 169.073145] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 169.077162] PD RX, header: 0x2161 [1] [ 169.077172] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 169.077178] PDO 1: type 0, 9000 mV, 2000 mA [] [ 169.077183] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 169.077191] Setting usb_comm capable false [ 169.077753] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 169.077759] Requesting PDO 1: 9000 mV, 2000 mA [ 169.077762] PD TX, header: 0x1042 [ 169.079990] PD TX complete, status: 0 [ 169.080013] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 169.083183] VBUS on [ 169.084195] PD RX, header: 0x363 [1] [ 169.084200] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 169.084206] Setting standby current 5000 mV @ 500 mA [ 169.084209] Setting voltage/current limit 5000 mV 500 mA [ 169.084220] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 169.260222] PD RX, header: 0x566 [1] [ 169.260227] Setting voltage/current limit 9000 mV 2000 mA [ 169.261315] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 169.261321] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] [ 169.261570] AMS POWER_NEGOTIATION finished Fixes: f0690a25a140b ("staging: typec: USB Type-C Port Manager (tcpm)") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210414024000.4175263-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 2021-02-25T18:17:31Z Linus Torvalds torvalds@linux-foundation.org 2021-02-25T18:17:31Z urn:sha1:6fbd6cf85a3be127454a1ad58525a3adcf8612ab Pull Kbuild updates from Masahiro Yamada: - Fix false-positive build warnings for ARCH=ia64 builds - Optimize dictionary size for module compression with xz - Check the compiler and linker versions in Kconfig - Fix misuse of extra-y - Support DWARF v5 debug info - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x exceeded the limit - Add generic syscall{tbl,hdr}.sh for cleanups across arches - Minor cleanups of genksyms - Minor cleanups of Kconfig * tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits) initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD kbuild: remove deprecated 'always' and 'hostprogs-y/m' kbuild: parse C= and M= before changing the working directory kbuild: reuse this-makefile to define abs_srctree kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig kconfig: omit --oldaskconfig option for 'make config' kconfig: fix 'invalid option' for help option kconfig: remove dead code in conf_askvalue() kconfig: clean up nested if-conditionals in check_conf() kconfig: Remove duplicate call to sym_get_string_value() Makefile: Remove # characters from compiler string Makefile: reuse CC_VERSION_TEXT kbuild: check the minimum linker version in Kconfig kbuild: remove ld-version macro scripts: add generic syscallhdr.sh scripts: add generic syscalltbl.sh arch: syscalls: remove $(srctree)/ prefix from syscall tables arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work gen_compile_commands: prune some directories kbuild: simplify access to the kernel's version ... 2021-02-21T05:32:37Z Linus Torvalds torvalds@linux-foundation.org 2021-02-21T05:32:37Z urn:sha1:780607b9731feef575514108fc7956c54180f16e Pull USB and Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 5.12-rc1. It's been an active set of development in these subsystems for the past few months: - loads of typec features added for new hardware - xhci features and bugfixes - dwc3 features added for more hardware support - dwc2 fixes and new hardware support - cdns3 driver updates for more hardware support - gadget driver cleanups and minor fixes - usb-serial fixes, new driver, and more devices supported - thunderbolt feature additions for new hardware - lots of other tiny fixups and additions The chrome driver changes are in here as well, as they depended on some of the typec changes, and the maintainer acked them. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits) dt-bindings: usb: mediatek: musb: add mt8516 compatbile dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623 dt-bindings: usb: mtk-xhci: add optional assigned clock properties Documentation: connector: Update the description of sink-vdos usb: misc: usb3503: Fix logic in usb3503_init() dt-bindings: usb: usb-device: fix typo in required properties usb: Replace lkml.org links with lore dt-bindings: usb: dwc3: add description for rk3328 dt-bindings: usb: convert rockchip,dwc3.txt to yaml usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable USB: quirks: sort quirk entries USB: serial: drop bogus to_usb_serial_port() checks USB: serial: make remove callback return void USB: serial: drop if with an always false condition usb: gadget: Assign boolean values to a bool variable usb: typec: tcpm: Get Sink VDO from fwnode dt-bindings: connector: Add SVDM VDO properties usb: typec: displayport: Fill the negotiated SVDM Version in the header usb: typec: ucsi: Determine common SVDM Version usb: typec: tcpm: Determine common SVDM Version ... 2021-02-16T03:01:45Z Sasha Levin sashal@kernel.org 2021-02-12T16:29:24Z urn:sha1:88a686728b3739d3598851e729c0e81f194e5c53 Instead of storing the version in a single integer and having various kernel (and userspace) code how it's constructed, export individual (major, patchlevel, sublevel) components and simplify kernel code that uses it. This should also make it easier on userspace. Signed-off-by: Sasha Levin <sashal@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2021-02-10T14:58:04Z Greg Kroah-Hartman gregkh@linuxfoundation.org 2021-02-10T14:58:04Z urn:sha1:c85bfed171aaa91a32dcecd7962a4c880bf9d0ab Johan writes: USB-serial updates for 5.12-rc1 Here are the USB-serial updates for 5.12-rc1, including: - a line-speed fix for newer pl2303 devices - a line-speed fix for FTDI FT-X devices - a new xr_serial driver for MaxLinear/Exar devices (non-ACM mode) - a cdc-acm blacklist entry for when the xr_serial driver is enabled - cp210x support for software flow control - various cp210x modem-control fixes - an updated ZTE P685M modem entry to stop claiming the QMI interface - an update to drop the port_remove() driver-callback return value Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (41 commits) USB: serial: drop bogus to_usb_serial_port() checks USB: serial: make remove callback return void USB: serial: drop if with an always false condition USB: serial: option: update interface mapping for ZTE P685M USB: serial: ftdi_sio: restore divisor-encoding comments USB: serial: ftdi_sio: fix FTX sub-integer prescaler USB: serial: cp210x: clean up auto-RTS handling USB: serial: cp210x: fix RTS handling USB: serial: cp210x: clean up printk zero padding USB: serial: cp210x: clean up flow-control debug message USB: serial: cp210x: drop shift macros USB: serial: cp210x: fix modem-control handling USB: serial: cp210x: suppress modem-control errors USB: serial: mos7720: fix error code in mos7720_write() USB: serial: xr: fix B0 handling USB: serial: xr: fix pin configuration USB: serial: xr: fix gpio-mode handling USB: serial: xr: simplify line-speed logic USB: serial: xr: clean up line-settings handling USB: serial: xr: document vendor-request recipient ... 2021-02-09T12:13:58Z Uwe Kleine-König uwe@kleine-koenig.org 2021-02-08T14:31:49Z urn:sha1:c5d1448fa353242635fa3e1fed6ab4558e0e7d9a All usb_serial drivers return 0 in their remove callbacks and driver core ignores the value returned by usb_serial_device_remove(). So change the remove callback to return void and return 0 unconditionally in usb_serial_device_remove(). Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210208143149.963644-2-uwe@kleine-koenig.org Signed-off-by: Johan Hovold <johan@kernel.org> 2021-02-09T10:48:54Z Kyle Tso kyletso@google.com 2021-02-05T03:34:10Z urn:sha1:31737c27d665bb3bc8ad9396c63fae2543dd8818 PD Rev 3.0 introduces SVDM Version 2.0. This patch makes the field configuable in the header in order to be able to be compatible with older SVDM version. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210205033415.3320439-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-02-09T10:48:54Z Kyle Tso kyletso@google.com 2021-02-05T03:34:09Z urn:sha1:3c5960c0559c44c6628341a82167ee0d3e40ee50 PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10 6.4.4.2.3 Structured VDM Version "The Structured VDM Version field of the Discover Identity Command sent and received during VDM discovery Shall be used to determine the lowest common Structured VDM Version supported by the Port Partners or Cable Plug and Shall continue to operate using this Specification Revision until they are Detached." Add a variable in typec_capability to specify the highest SVDM version supported by the port and another variable in typec_partner to cache the negotiated SVDM version between the port and the partner. Also add setter/getter functions for the negotiated SVDM version. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210205033415.3320439-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-02-06T13:21:21Z Thinh Nguyen Thinh.Nguyen@synopsys.com 2021-01-20T01:36:14Z urn:sha1:52c2d15703c3a900d5f78cd599b823db40d5100b The USB "maximum-speed" property can now take the SSP signaling rate generation and lane count with these new strings: "super-speed-plus-gen2x2" "super-speed-plus-gen2x1" "super-speed-plus-gen1x2" Introduce usb_get_maximum_ssp_rate() to parse for the corresponding usb_ssp_rate enum. The original usb_get_maximum_speed() will return USB_SPEED_SUPER_PLUS if it matches one of these new strings. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f8ed896313d8cd8e2d2b540fc82db92b3ddf8a47.1611106162.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-02-04T06:27:22Z Kyle Tso kyletso@google.com 2021-02-04T00:50:36Z urn:sha1:2a1673f0f1de78b146bfdbe8c8a773c4a0499790 Reland VDO definitions of PD Revision 2.0 as they are still used in PD2.0 products. Fixes: 0e1d6f55a12e ("usb: pd: Update VDO definitions") Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210204005036.1555294-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>