user/sven/linux.git/include/linux/usb, branch v5.15.76

usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles

2022-09-08T10:28:06Z

commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream. Fix incorrect pin assignment values when connecting to a monitor with Type-C receptacle instead of a plug. According to specification, an UFP_D receptacle's pin assignment should came from the UFP_D pin assignments field (bit 23:16), while an UFP_D plug's assignments are described in the DFP_D pin assignments (bit 15:8) during Mode Discovery. For example the LG 27 UL850-W is a monitor with Type-C receptacle. The monitor responds to MODE DISCOVERY command with following DisplayPort Capability flag: dp->alt->vdo=0x140045 The existing logic only take cares of UPF_D plug case, and would take the bit 15:8 for this 0x140045 case. This results in an non-existing pin assignment 0x0 in dp_altmode_configure. To fix this problem a new set of macros are introduced to take plug/receptacle differences into consideration. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by: Pablo Sun Co-developed-by: Macpaul Lin Reviewed-by: Guillaume Ranquet Reviewed-by: Heikki Krogerus Signed-off-by: Pablo Sun Signed-off-by: Macpaul Lin Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman

USB: HCD: Fix URB giveback issue in tasklet function

2022-08-17T12:22:58Z

commit 26c6c2f8a907c9e3a2f24990552a4d77235791e6 upstream. Usb core introduce the mechanism of giveback of URB in tasklet context to reduce hardware interrupt handling time. On some test situation(such as FIO with 4KB block size), when tasklet callback function called to giveback URB, interrupt handler add URB node to the bh->head list also. If check bh->head list again after finish all URB giveback of local_list, then it may introduce a "dynamic balance" between giveback URB and add URB to bh->head list. This tasklet callback function may not exit for a long time, which will cause other tasklet function calls to be delayed. Some real-time applications(such as KB and Mouse) will see noticeable lag. In order to prevent the tasklet function from occupying the cpu for a long time at a time, new URBS will not be added to the local_list even though the bh->head list is not empty. But also need to ensure the left URB giveback to be processed in time, so add a member high_prio for structure giveback_urb_bh to prioritize tasklet and schelule this tasklet again if bh->head list is not empty. At the same time, we are able to prioritize tasklet through structure member high_prio. So, replace the local high_prio_bh variable with this structure member in usb_hcd_giveback_urb. Fixes: 94dfd7edfd5c ("USB: HCD: support giveback of URB in tasklet context") Cc: stable Reviewed-by: Alan Stern Signed-off-by: Weitao Wang Link: https://lore.kernel.org/r/20220726074918.5114-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: Add support for deferring roothub registration

2022-06-09T08:22:28Z

commit a44623d9279086c89f631201d993aa332f7c9e66 upstream. It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. This patch has been added and reverted earier as it triggered a race in usb device enumeration. That race is now fixed in 5.16-rc3, and in stable back to 5.4 commit 6cca13de26ee ("usb: hub: Fix locking issues with address0_mutex") commit 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20220510091630.16564-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

usb: roles: fix include/linux/usb/role.h compile issue

2022-02-01T16:27:07Z

commit 945c37ed564770c78dfe6b9f08bed57a1b4e60ef upstream. when CONFIG_USB_ROLE_SWITCH is not defined, add usb_role_switch_find_by_fwnode() definition which return NULL. Fixes: c6919d5e0cd1 ("usb: roles: Add usb_role_switch_find_by_fwnode()") Signed-off-by: Linyu Yuan Link: https://lore.kernel.org/r/1641818608-25039-1-git-send-email-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman

Revert "usb: core: hcd: Add support for deferring roothub registration"

2021-11-06T13:13:30Z

This reverts commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman Cc: Chris Chiu Cc: Alan Stern Cc: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: Add support for deferring roothub registration

2021-09-14T08:41:30Z

It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

USB: EHCI: Add alias for Broadcom INSNREG

2021-08-18T20:28:28Z

Refactor struct ehci_regs to avoid accessing beyond the end of port_status. This change results in no difference in the final object code. Avoids several warnings when building with -Warray-bounds: drivers/usb/host/ehci-brcm.c: In function 'ehci_brcm_reset': drivers/usb/host/ehci-brcm.c:113:32: warning: array subscript 16 is above array bounds of 'u32[15]' {aka 'unsigned int[15]'} [-Warray-bounds] 113 | ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/usb/host/ehci.h:274, from drivers/usb/host/ehci-brcm.c:15: ./include/linux/usb/ehci_def.h:132:7: note: while referencing 'port_status' 132 | u32 port_status[HCS_N_PORTS_MAX]; | ^~~~~~~~~~~ Note that the documentation around this proprietary register was confusing. If "USB_EHCI_INSNREG00" is at port_status[0x0f], its offset would be 0x80 (not 0x90). The comments have been adjusted to fix this apparent typo. Fixes: 9df231511bd6 ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's") Cc: Al Cooper Cc: Alan Stern Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Suggested-by: Arnd Bergmann Acked-by: Alan Stern Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20210818173018.2259231-3-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman

USB: EHCI: Add register array bounds to HCS ports

2021-08-18T20:28:27Z

The original EHCI register struct used a trailing 0-element array for addressing the N_PORTS-many available registers. However, after commit a46af4ebf9ff ("USB: EHCI: define extension registers like normal ones") the 0-element array started to overlap the USBMODE extension register. To avoid future compile-time warnings about accessing indexes within a 0-element array, rearrange the struct to actually describe the expected layout (max 15 registers) with a union. All offsets remain the same, and bounds checking becomes possible on accesses to port_status and hostpc. There are no binary differences, and struct offsets continue to match. "pahole --hex -C ehci_regs" before: struct ehci_regs { u32 command; /* 0 0x4 */ u32 status; /* 0x4 0x4 */ u32 intr_enable; /* 0x8 0x4 */ u32 frame_index; /* 0xc 0x4 */ u32 segment; /* 0x10 0x4 */ u32 frame_list; /* 0x14 0x4 */ u32 async_next; /* 0x18 0x4 */ u32 reserved1[2]; /* 0x1c 0x8 */ u32 txfill_tuning; /* 0x24 0x4 */ u32 reserved2[6]; /* 0x28 0x18 */ /* --- cacheline 1 boundary (64 bytes) --- */ u32 configured_flag; /* 0x40 0x4 */ u32 port_status[0]; /* 0x44 0 */ u32 reserved3[9]; /* 0x44 0x24 */ u32 usbmode; /* 0x68 0x4 */ u32 reserved4[6]; /* 0x6c 0x18 */ /* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */ u32 hostpc[0]; /* 0x84 0 */ u32 reserved5[17]; /* 0x84 0x44 */ /* --- cacheline 3 boundary (192 bytes) was 8 bytes ago --- */ u32 usbmode_ex; /* 0xc8 0x4 */ /* size: 204, cachelines: 4, members: 18 */ /* last cacheline: 12 bytes */ }; after: struct ehci_regs { u32 command; /* 0 0x4 */ u32 status; /* 0x4 0x4 */ u32 intr_enable; /* 0x8 0x4 */ u32 frame_index; /* 0xc 0x4 */ u32 segment; /* 0x10 0x4 */ u32 frame_list; /* 0x14 0x4 */ u32 async_next; /* 0x18 0x4 */ u32 reserved1[2]; /* 0x1c 0x8 */ u32 txfill_tuning; /* 0x24 0x4 */ u32 reserved2[6]; /* 0x28 0x18 */ /* --- cacheline 1 boundary (64 bytes) --- */ u32 configured_flag; /* 0x40 0x4 */ union { u32 port_status[15]; /* 0x44 0x3c */ struct { u32 reserved3[9]; /* 0x44 0x24 */ u32 usbmode; /* 0x68 0x4 */ }; /* 0x44 0x28 */ }; /* 0x44 0x3c */ /* --- cacheline 2 boundary (128 bytes) --- */ u32 reserved4; /* 0x80 0x4 */ u32 hostpc[15]; /* 0x84 0x3c */ /* --- cacheline 3 boundary (192 bytes) --- */ u32 reserved5[2]; /* 0xc0 0x8 */ u32 usbmode_ex; /* 0xc8 0x4 */ /* size: 204, cachelines: 4, members: 16 */ /* last cacheline: 12 bytes */ }; With this fixed, adding -Wzero-length-bounds to the build no longer produces several warnings like this: In file included from drivers/usb/host/ehci-hcd.c:306: drivers/usb/host/ehci-hub.c: In function 'ehci_port_handed_over': drivers/usb/host/ehci-hub.c:1194:8: warning: array subscript '' is outside the bounds of an interior zero-length array 'u32[0]' {aka 'unsigned int[]'} [-Wzero-length-bounds] 1194 | reg = &ehci->regs->port_status[portnum - 1]; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/usb/host/ehci.h:274, from drivers/usb/host/ehci-hcd.c:97: ./include/linux/usb/ehci_def.h:130:7: note: while referencing 'port_status' 130 | u32 port_status[0]; /* up to N_PORTS */ | ^~~~~~~~~~~ Cc: Greg Kroah-Hartman Cc: Arnd Bergmann Cc: Al Cooper Cc: Alan Stern Cc: linux-usb@vger.kernel.org Acked-by: Alan Stern Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20210818173018.2259231-2-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman

usb: gadget: remove unnecessary AND operation when get ep maxp

2021-08-13T11:05:51Z

usb_endpoint_maxp() already returns actual max packet size, no need to AND 0x7ff. Acked-by: Felipe Balbi Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1628836253-7432-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

Merge 5.14-rc5 into usb-next

2021-08-09T06:12:09Z

We need the usb fixes in here as well. Signed-off-by: Greg Kroah-Hartman