user/sven/linux.git/include/linux/usb, branch v5.4.38

USB: core: add endpoint-blacklist quirk

2020-02-28T16:22:16Z

commit 73f8bda9b5dc1c69df2bc55c0cbb24461a6391a9 upstream. Add a new device quirk that can be used to blacklist endpoints. Since commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") USB core ignores any duplicate endpoints found during descriptor parsing. In order to handle devices where the first interfaces with duplicate endpoints are the ones that should have their endpoints ignored, we need to add a blacklist. Tested-by: edes Cc: stable Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: serial: ir-usb: fix link-speed handling

2020-02-01T09:34:32Z

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream. Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header. This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl). Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Cc: stable # 2.6.27 Cc: Felipe Balbi Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-09-18T17:33:46Z

Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-09-16T22:48:14Z

Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...

usb: roles: Add fwnode_usb_role_switch_get() function

2019-09-03T14:46:17Z

The fwnode_usb_role_switch_get() function is exactly the same as usb_role_switch_get(), except that it takes struct fwnode_handle as parameter instead of struct device. Signed-off-by: Heikki Krogerus Signed-off-by: Chunfeng Yun Tested-by: Biju Das Link: https://lore.kernel.org/r/1567070558-29417-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: roles: Introduce stubs for the exiting functions in role.h

2019-09-03T14:02:32Z

This patch adds stubs for the exiting functions while CONFIG_USB_ROLE_SWITCH does not enabled. Cc: Greg Kroah-Hartman Cc: Heikki Krogerus Cc: Hans de Goede Cc: Andy Shevchenko Cc: John Stultz Reviewed-by: Heikki Krogerus Signed-off-by: Yu Chen Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1567070558-29417-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-09-02T17:20:57Z

Felipe writes: USB: Changes for v5.4 merge window With only 45 non-merge commits, we have a small merge window from the Gadget perspective. The biggest change here is the addition of the Cadence USB3 DRD Driver. All other changes are small, non-critical fixes or smaller new features like the improvement to BESL handling in dwc3. Signed-off-by: Felipe Balbi * tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits) usb: gadget: net2280: Add workaround for AB chip Errata 11 usb: gadget: net2280: Move all "ll" registers in one structure usb: dwc3: gadget: Workaround Mirosoft's BESL check usb:cdns3 Fix for stuck packets in on-chip OUT buffer. usb: cdns3: Add Cadence USB3 DRD Driver usb: common: Simplify usb_decode_get_set_descriptor function. usb: common: Patch simplify usb_decode_set_clear_feature function. usb: common: Separated decoding functions from dwc3 driver. dt-bindings: add binding for USBSS-DRD controller. usb: gadget: composite: Set recommended BESL values usb: dwc3: gadget: Set BESL config parameter usb: dwc3: Separate field holding multiple properties usb: gadget: Export recommended BESL values usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant usb: udc: lpc32xx: silence fall-through warning usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables usb: udc: lpc32xx: remove set but not used 3 variables usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails usb: dwc3: st: Add of_dev_put() in probe function usb: dwc3: st: Add of_node_put() before return in probe function ...

usb: gadget: net2280: Move all "ll" registers in one structure

2019-08-30T06:14:38Z

The split into multiple structures of the "ll" register bank is impractical. It makes it hard to add ll_lfps_timers_2 which is at offset 0x794, which is outside of the existing "lfps" structure and would require us to add yet another one. Instead, move all the "ll" registers into a single usb338x_ll_regs structure, and add ll_lfps_timers_2 while at it. It will be used in a subsequent patch. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Felipe Balbi

usb: common: Separated decoding functions from dwc3 driver.

2019-08-29T07:52:27Z

Patch moves some decoding functions from driver/usb/dwc3/debug.h driver to driver/usb/common/debug.c file. These moved functions include: dwc3_decode_get_status dwc3_decode_set_clear_feature dwc3_decode_set_address dwc3_decode_get_set_descriptor dwc3_decode_get_configuration dwc3_decode_set_configuration dwc3_decode_get_intf dwc3_decode_set_intf dwc3_decode_synch_frame dwc3_decode_set_sel dwc3_decode_set_isoch_delay dwc3_decode_ctrl These functions are used also in inroduced cdns3 driver. All functions prefixes were changed from dwc3 to usb. Also, function's parameters has been extended according to the name of fields in standard SETUP packet. Additionally, patch adds usb_decode_ctrl function to include/linux/usb/ch9.h file. Signed-off-by: Pawel Laszczak Signed-off-by: Felipe Balbi

usb: gadget: Export recommended BESL values

2019-08-28T10:04:59Z

Currently there's no option for the controller driver to report the recommended Best Effort Service Latency (BESL) when operating with LPM support. Add new fields in usb_dcd_config_params to export the recommended baseline and deep BESL values for the function drivers to set the proper BESL value in the BOS descriptor. Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi