user/sven/linux.git/include/linux/usb, branch v5.4.63

usb: host: ehci-platform: add a quirk to avoid stuck

2020-06-24T15:50:44Z

[ Upstream commit cc7eac1e4afdd151085be4d0341a155760388653 ] Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to be getting stuck very rarely after a full/low usb device was disconnected. To detect/recover from such a situation, the controllers require a special way which poll the EHCI PORTSC register and changes the OHCI functional state. So, this patch adds a polling timer into the ehci-platform driver, and if the ehci driver detects the issue by the EHCI PORTSC register, the ehci driver removes a companion device (= the OHCI controller) to change the OHCI functional state to USB Reset once. And then, the ehci driver adds the companion device again. Signed-off-by: Yoshihiro Shimoda Acked-by: Alan Stern Link: https://lore.kernel.org/r/1580114262-25029-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: gadget: Fix issue with config_ep_by_speed function

2020-06-24T15:50:32Z

[ Upstream commit 5d363120aa548ba52d58907a295eee25f8207ed2 ] This patch adds new config_ep_by_speed_and_alt function which extends the config_ep_by_speed about alt parameter. This additional parameter allows to find proper usb_ss_ep_comp_descriptor. Problem has appeared during testing f_tcm (BOT/UAS) driver function. f_tcm function for SS use array of headers for both BOT/UAS alternate setting: static struct usb_descriptor_header *uasp_ss_function_desc[] = { (struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL, }; The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS. During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object. Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to uasp_ss_bi_desc. This is due to the fact that it searches endpoint based on endpoint address: for_each_ep_desc(speed_desc, d_spd) { chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; if (chosen_desc->bEndpoitAddress == _ep->address) goto ep_found; } And in result it uses the descriptor from BOT alternate setting instead UAS. Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot. Signed-off-by: Jayshri Pawar Signed-off-by: Pawel Laszczak Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: gadget: core: sync interrupt before unbind the udc

2020-06-24T15:50:16Z

[ Upstream commit 3c73bc52195def14165c3a7d91bdbb33b51725f5 ] The threaded interrupt handler may still be called after the usb_gadget_disconnect is called, it causes the structures used at interrupt handler was freed before it uses, eg the usb_request. This issue usually occurs we remove the udc function during the transfer. Below is the example when doing stress test for android switch function, the EP0's request is freed by .unbind (configfs_composite_unbind -> composite_dev_cleanup), but the threaded handler accesses this request during handling setup packet request. In fact, there is no protection between unbind the udc and udc interrupt handling, so we have to avoid the interrupt handler is occurred or scheduled during the .unbind flow. init: Sending signal 9 to service 'adbd' (pid 18077) process group... android_work: did not send uevent (0 0 000000007bec2039) libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 6ms init: Service 'adbd' (pid 18077) received signal 9 init: Sending signal 9 to service 'adbd' (pid 18077) process group... libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 0ms init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:14) init: Received control message 'start' for 'adbd' from pid: 399 (/vendor/bin/hw/android.hardware.usb@1. init: starting service 'adbd'... read descriptors read strings Unable to handle kernel read from unreadable memory at virtual address 000000000000002a android_work: sent uevent USB_STATE=CONNECTED Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e97f1000 using random self ethernet address [000000000000002a] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 232 Comm: irq/68-5b110000 Not tainted 5.4.24-06075-g94a6b52b5815 #92 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 00400085 (nzcv daIf +PAN -UAO) using random host ethernet address pc : composite_setup+0x5c/0x1730 lr : android_setup+0xc0/0x148 sp : ffff80001349bba0 x29: ffff80001349bba0 x28: ffff00083a50da00 x27: ffff8000124e6000 x26: ffff800010177950 x25: 0000000000000040 x24: ffff000834e18010 x23: 0000000000000000 x22: 0000000000000000 x21: ffff00083a50da00 x20: ffff00082e75ec40 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001 x11: ffff80001180fb58 x10: 0000000000000040 x9 : ffff8000120fc980 x8 : 0000000000000000 x7 : ffff00083f98df50 x6 : 0000000000000100 x5 : 00000307e8978431 x4 : ffff800011386788 x3 : 0000000000000000 x2 : ffff800012342000 x1 : 0000000000000000 x0 : ffff800010c6d3a0 Call trace: composite_setup+0x5c/0x1730 android_setup+0xc0/0x148 cdns3_ep0_delegate_req+0x64/0x90 cdns3_check_ep0_interrupt_proceed+0x384/0x738 cdns3_device_thread_irq_handler+0x124/0x6e0 cdns3_thread_irq+0x94/0xa0 irq_thread_fn+0x30/0xa0 irq_thread+0x150/0x248 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: 910e8000 f9400693 12001ed7 79400f79 (3940aa61) ---[ end trace c685db37f8773fba ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,20002008 Memory Limit: none Rebooting in 5 seconds.. Reviewed-by: Jun Li Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

USB: core: add endpoint-blacklist quirk

2020-02-28T16:22:16Z

commit 73f8bda9b5dc1c69df2bc55c0cbb24461a6391a9 upstream. Add a new device quirk that can be used to blacklist endpoints. Since commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") USB core ignores any duplicate endpoints found during descriptor parsing. In order to handle devices where the first interfaces with duplicate endpoints are the ones that should have their endpoints ignored, we need to add a blacklist. Tested-by: edes Cc: stable Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: serial: ir-usb: fix link-speed handling

2020-02-01T09:34:32Z

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream. Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header. This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl). Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Cc: stable # 2.6.27 Cc: Felipe Balbi Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-09-18T17:33:46Z

Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-09-16T22:48:14Z

Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...

usb: roles: Add fwnode_usb_role_switch_get() function

2019-09-03T14:46:17Z

The fwnode_usb_role_switch_get() function is exactly the same as usb_role_switch_get(), except that it takes struct fwnode_handle as parameter instead of struct device. Signed-off-by: Heikki Krogerus Signed-off-by: Chunfeng Yun Tested-by: Biju Das Link: https://lore.kernel.org/r/1567070558-29417-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

usb: roles: Introduce stubs for the exiting functions in role.h

2019-09-03T14:02:32Z

This patch adds stubs for the exiting functions while CONFIG_USB_ROLE_SWITCH does not enabled. Cc: Greg Kroah-Hartman Cc: Heikki Krogerus Cc: Hans de Goede Cc: Andy Shevchenko Cc: John Stultz Reviewed-by: Heikki Krogerus Signed-off-by: Yu Chen Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1567070558-29417-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-09-02T17:20:57Z

Felipe writes: USB: Changes for v5.4 merge window With only 45 non-merge commits, we have a small merge window from the Gadget perspective. The biggest change here is the addition of the Cadence USB3 DRD Driver. All other changes are small, non-critical fixes or smaller new features like the improvement to BESL handling in dwc3. Signed-off-by: Felipe Balbi * tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits) usb: gadget: net2280: Add workaround for AB chip Errata 11 usb: gadget: net2280: Move all "ll" registers in one structure usb: dwc3: gadget: Workaround Mirosoft's BESL check usb:cdns3 Fix for stuck packets in on-chip OUT buffer. usb: cdns3: Add Cadence USB3 DRD Driver usb: common: Simplify usb_decode_get_set_descriptor function. usb: common: Patch simplify usb_decode_set_clear_feature function. usb: common: Separated decoding functions from dwc3 driver. dt-bindings: add binding for USBSS-DRD controller. usb: gadget: composite: Set recommended BESL values usb: dwc3: gadget: Set BESL config parameter usb: dwc3: Separate field holding multiple properties usb: gadget: Export recommended BESL values usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant usb: udc: lpc32xx: silence fall-through warning usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables usb: udc: lpc32xx: remove set but not used 3 variables usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails usb: dwc3: st: Add of_dev_put() in probe function usb: dwc3: st: Add of_node_put() before return in probe function ...