user/sven/linux.git/include/linux/usb, branch v6.2.7

xhci: disable U3 suspended ports in S4 hibernate poweroff_late stage

2022-11-30T11:10:48Z

Disable U3 suspended ports in hibernate S4 poweroff_late for systems with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled. This reduces the number of self-powered usb devices from surviving in U3 suspended state into next reboot. Bootloader/firmware on these systems can't handle usb ports in U3, and will timeout, causing extra delay during reboot/restore from S4. Add pci_poweroff_late() callback to struct usb_hcd to get this done at the correct stage in hibernate. Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: Add partner PD object wrapper

2022-11-29T07:56:09Z

Some port drivers may want to set a Type-C partner as a parent for a USB Power Delivery object, but the Type-C partner struct isn't exposed outside of the Type-C class driver. Add a wrapper to usb_power_delivery_register() which sets the provided Type-C partner as a parent to the USB PD object. This helps to avoid exposing the Type-C partner's device struct unnecessarily. Cc: Benson Leung Suggested-by: Heikki Krogerus Reviewed-by: Heikki Krogerus Signed-off-by: Prashant Malani Link: https://lore.kernel.org/r/20221122220538.2991775-2-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-10-07T23:48:26Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...

Merge 6.0-rc4 into usb-next

2022-09-05T06:03:23Z

We need the USB fixes in here and this resolves the merge issue in: drivers/usb/dwc3/gadget.c Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman

Merge 6.0-rc4 into tty-next

2022-09-05T05:59:28Z

We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman

USB: hcd-pci: Drop the unused id parameter from usb_hcd_pci_probe()

2022-09-01T14:08:35Z

Since the HC driver is now passed to the function with its own parameter (it used to be picked from id->driver_data), the id parameter serves no purpose. Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20220831125052.71584-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Add support for VBUS control with PHY

2022-08-31T07:07:52Z

Some platforms make use of VBUS control over PHY which means controller driver has to access PHY registers to turn on/off VBUS line.This patch adds support for such platforms in chipidea. Flag 'CI_HDRC_PHY_VBUS_CONTROL' added to support VBus control feature. Acked-by: Peter Chen Signed-off-by: Piyush Mehta Signed-off-by: Piyush Mehta Link: https://lore.kernel.org/r/20220822054051.2941282-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman

usb: serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35Z

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common

2022-08-19T09:05:12Z

Move transition function "tcpci_to_typec_cc" to common header Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Gene Chen Link: https://lore.kernel.org/r/20220805071714.150882-7-gene.chen.richtek@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles

2022-08-18T19:20:07Z

Fix incorrect pin assignment values when connecting to a monitor with Type-C receptacle instead of a plug. According to specification, an UFP_D receptacle's pin assignment should came from the UFP_D pin assignments field (bit 23:16), while an UFP_D plug's assignments are described in the DFP_D pin assignments (bit 15:8) during Mode Discovery. For example the LG 27 UL850-W is a monitor with Type-C receptacle. The monitor responds to MODE DISCOVERY command with following DisplayPort Capability flag: dp->alt->vdo=0x140045 The existing logic only take cares of UPF_D plug case, and would take the bit 15:8 for this 0x140045 case. This results in an non-existing pin assignment 0x0 in dp_altmode_configure. To fix this problem a new set of macros are introduced to take plug/receptacle differences into consideration. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by: Pablo Sun Co-developed-by: Macpaul Lin Reviewed-by: Guillaume Ranquet Reviewed-by: Heikki Krogerus Signed-off-by: Pablo Sun Signed-off-by: Macpaul Lin Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman