user/sven/linux.git/include/linux/usb, branch v6.4.9

Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial detection"

2023-07-19T14:36:36Z

[ Upstream commit df49f2a0ac4a34c0cb4b5c233fcfa0add644c43c ] This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15. Heikki reports that this should not be a global flag just to work around one broken driver and should be fixed differently, so revert it. Reported-by: Heikki Krogerus Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection") Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com Cc: Prashanth K Cc: AngeloGioacchino Del Regno Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: common: usb-conn-gpio: Set last role to unknown before initial detection

2023-07-19T14:36:36Z

[ Upstream commit edd60d24bd858cef165274e4cd6cab43bdc58d15 ] Currently if we bootup a device without cable connected, then usb-conn-gpio won't call set_role() since last_role is same as current role. This happens because during probe last_role gets initialised to zero. To avoid this, added a new constant in enum usb_role, last_role is set to USB_ROLE_UNKNOWN before performing initial detection. While at it, also handle default case for the usb_role switch in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid build warnings. Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver") Signed-off-by: Prashanth K Reviewed-by: AngeloGioacchino Del Regno Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: Extend pci resume function to handle PM events

2023-07-19T14:36:26Z

[ Upstream commit 1f7d5520719dd1fed1a2947679f6cc26a55f1e6b ] Currently, the pci_resume method has only a flag indicating whether the system is resuming from hibernation. In order to handle all PM events like AUTO_RESUME (runtime resume from device in D3), RESUME (system resume from s2idle, S3 or S4 states) etc change the pci_resume method to handle all PM events. Signed-off-by: Basavaraj Natikar Acked-by: Alan Stern Acked-by: Mathias Nyman Link: https://lore.kernel.org/r/20230428140056.1318981-2-Basavaraj.Natikar@amd.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 1c024241d018 ("xhci: Improve the XHCI system resume time") Signed-off-by: Sasha Levin

ARM/musb: omap2: Remove global GPIO numbers from TUSB6010

2023-07-19T14:35:48Z

[ Upstream commit 8e0285ab95a9baf374f2c13eb152221c8ecb3f28 ] The TUSB6010 (MUSB) device is picking up some GPIO lines hardcoded by number and passing on to the TUSB6010 device when registering it. Instead of nasty workarounds, provide a GPIO descriptor table and then make the TUSB6010 MUSB glue driver pick up the GPIO lines directly, convert it to an IRQ and pass down to the MUSB driver. OMAP2 is the only system using the TUSB6010. Stash the GPIO descriptors in the glue layer and use then to power up and down the TUSB6010 on-demand, instead of using boardfile callbacks. Since the OMAP2 boards are the only boards using the .set_power() and .board_set_power() callbacks, we can just delete them as the power is now handled directly in the TUSB6010 glue code. Cc: Bin Liu Cc: linux-usb@vger.kernel.org Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Acked-by: Greg Kroah-Hartman Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

usb: usbfs: Enforce page requirements for mmap

2023-05-29T15:14:28Z

The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman

usb: gadget: drop superfluous ':' in doc string

2023-05-13T09:04:59Z

There was one superfluous ':' that kernel-doc complained about. Reported-by: Randy Dunlap Closes: https://lore.kernel.org/all/c718a490-028d-2682-9ad7-8256d16504bf@infradead.org/ Fixes: fb6211f1584a ("usb: gadget: add doc to struct usb_composite_dev") Signed-off-by: Jó Ágila Bitsch Reviewed-by: Randy Dunlap Link: https://lore.kernel.org/r/ZEQFzMntIrwvZl4+@jo-einhundert Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57Z

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

usb: gadget: Add function wakeup support

2023-03-29T08:27:01Z

USB3.2 spec section 9.2.5.4 quotes that a function may signal that it wants to exit from Function Suspend by sending a Function Wake Notification to the host if it is enabled for function remote wakeup. Add an api in composite layer that can be used by the function drivers to support this feature. Also expose a gadget op so that composite layer can trigger a wakeup request to the UDC driver. Reviewed-by: Thinh Nguyen Signed-off-by: Elson Roy Serrao Link: https://lore.kernel.org/r/1679694482-16430-4-git-send-email-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: Properly configure the device for remote wakeup

2023-03-29T08:27:00Z

The wakeup bit in the bmAttributes field indicates whether the device is configured for remote wakeup. But this field should be allowed to set only if the UDC supports such wakeup mechanism. So configure this field based on UDC capability. Also inform the UDC whether the device is configured for remote wakeup by implementing a gadget op. Reviewed-by: Thinh Nguyen Signed-off-by: Elson Roy Serrao Link: https://lore.kernel.org/r/1679694482-16430-2-git-send-email-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman

xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals

2023-03-29T06:56:35Z

A recent patch caused an unused-function warning in builds with CONFIG_PM disabled, after the function became marked 'static': drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function] 91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) | ^~~~~~~~~~~~~~~~~~~ This could be solved by adding another #ifdef, but as there is a trend towards removing CONFIG_PM checks in favor of helper macros, do the same conversion here and use pm_ptr() to get either a function pointer or NULL but avoid the warning. As the hidden functions reference some other symbols, make sure those are visible at compile time, at the minimal cost of a few extra bytes for 'struct usb_device'. Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman