user/sven/linux.git/include/linux/usb, branch v6.6.5

Revert "usb: phy: add usb phy notify port status API"

2023-12-03T06:33:08Z

commit 1a229d8690a0f8951fc4aa8b76a7efab0d8de342 upstream. This reverts commit a08799cf17c22375752abfad3b4a2b34b3acb287. The recently added Realtek PHY drivers depend on the new port status notification mechanism which was built on the deprecated USB PHY implementation and devicetree binding. Specifically, using these PHYs would require describing the very same PHY using both the generic "phy" property and the deprecated "usb-phy" property which is clearly wrong. We should not be building new functionality on top of the legacy USB PHY implementation even if it is currently stuck in some kind of transitional limbo. Revert the new notification interface which is broken by design. Fixes: a08799cf17c2 ("usb: phy: add usb phy notify port status API") Cc: stable@vger.kernel.org # 6.6 Cc: Stanley Chang Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20231106110654.31090-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-09-01T16:23:34Z

Pull USB / Thunderbolt / PHY driver updates from Greg KH: "Here is the big set of USB, Thunderbolt, and PHY driver updates for 6.6-rc1. Included in here are: - PHY driver additions and cleanups - Thunderbolt minor additions and fixes - USB MIDI 2 gadget support added - dwc3 driver updates and additions - Removal of some old USB wireless code that was missed when that codebase was originally removed a few years ago, cleaning up some core USB code paths - USB core potential use-after-free fixes that syzbot from different people/groups keeps tripping over - typec updates and additions - gadget fixes and cleanups - loads of smaller USB core and driver cleanups all over the place Full details are in the shortlog. All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) platform/chrome: cros_ec_typec: Configure Retimer cable type tcpm: Avoid soft reset when partner does not support get_status usb: typec: tcpm: reset counter when enter into unattached state after try role usb: typec: tcpm: set initial svdm version based on pd revision USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) usb: dwc2: add pci_device_id driver_data parse support usb: gadget: remove max support speed info in bind operation usb: gadget: composite: cleanup function config_ep_by_speed_and_alt() usb: gadget: config: remove max speed check in usb_assign_descriptors() usb: gadget: unconditionally allocate hs/ss descriptor in bind operation usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind() usb: gadget: add a inline function gether_bitrate() usb: gadget: use working speed to calcaulate network bitrate and qlen dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support usb: dwc3: exynos: Add support for Exynos850 variant usb: gadget: udc-xilinx: fix incorrect type in assignment warning usb: gadget: udc-xilinx: fix cast from restricted __le16 warning usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning USB: dwc2: hande irq on dead controller correctly ...

r8152: add vendor/device ID pair for D-Link DUB-E250

2023-08-28T19:53:40Z

The D-Link DUB-E250 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Antonio Napolitano Link: https://lore.kernel.org/r/CV200KJEEUPC.WPKAHXCQJ05I@mercurius Signed-off-by: Jakub Kicinski

usb: typec: tcpci: clear the fault status bit

2023-08-22T12:44:52Z

According the "USB Type-C Port Controller Interface Specification v2.0" the TCPC sets the fault status register bit-7 (AllRegistersResetToDefault) once the registers have been reset to their default values. This triggers an alert(-irq) on PTN5110 devices albeit we do mask the fault-irq, which may cause a kernel hang. Fix this generically by writing a one to the corresponding bit-7. Cc: stable@vger.kernel.org Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)") Reported-by: "Angus Ainslie (Purism)" Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/ Reported-by: Christian Bach Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/ Signed-off-by: Marco Felsch Signed-off-by: Fabio Estevam Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: typec: bus: verify partner exists in typec_altmode_attention

2023-08-22T12:44:28Z

Some usb hubs will negotiate DisplayPort Alt mode with the device but will then negotiate a data role swap after entering the alt mode. The data role swap causes the device to unregister all alt modes, however the usb hub will still send Attention messages even after failing to reregister the Alt Mode. type_altmode_attention currently does not verify whether or not a device's altmode partner exists, which results in a NULL pointer error when dereferencing the typec_altmode and typec_altmode_ops belonging to the altmode partner. Verify the presence of a device's altmode partner before sending the Attention message to the Alt Mode driver. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera Reviewed-by: Heikki Krogerus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman

USB: Remove remnants of Wireless USB and UWB

2023-08-09T12:17:06Z

Wireless USB has long been defunct, and kernel support for it was removed in 2020 by commit caa6772db4c1 ("Staging: remove wusbcore and UWB from the kernel tree."). Nevertheless, some vestiges of the old implementation still clutter up the USB subsystem and one or two other places. Let's get rid of them once and for all. The only parts still left are the user-facing APIs in include/uapi/linux/usb/ch9.h. (There are also a couple of misleading instances, such as the Sierra Wireless USB modem, which is a USB modem made by Sierra Wireless.) Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/b4f2710f-a2de-4fb0-b50f-76776f3a961b@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add workaround for chipidea PEC bug

2023-08-09T12:16:06Z

Some NXP processors using ChipIdea USB IP have a bug when frame babble is detected. Issue description: In USB camera test, our controller is host in HS mode. In ISOC IN, when device sends data across the micro frame, it causes the babble in host controller. This will clear the PE bit. In spec, it also requires to set the PEC bit and then set the PCI bit. Without the PCI interrupt, the software does not know the PE is cleared. This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted platform datas. And the ehci host driver will assert PEC by SW when specific conditions are satisfied. Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: phy: add usb phy notify port status API

2023-07-26T04:38:14Z

In Realtek SoC, the parameter of usb phy is designed to can dynamic tuning base on port status. Therefore, add a notify callback of phy driver when usb port status change. The Realtek phy driver is designed to dynamically adjust disconnection level and calibrate phy parameters. When the device connected bit changes and when the disconnected bit changes, do port status change notification: Check if portstatus is USB_PORT_STAT_CONNECTION and portchange is USB_PORT_STAT_C_CONNECTION. 1. The device is connected, the driver lowers the disconnection level and calibrates the phy parameters. 2. The device disconnects, the driver increases the disconnect level and calibrates the phy parameters. When controller to notify connect that device is already ready. If we adjust the disconnection level in notify_connect, the disconnect may have been triggered at this stage. So we need to change that as early as possible. The status change of connection is before port reset. Therefore, we add an api to notify phy the port status changes. In this stage, the device is not port enable, and it will not trigger disconnection. Signed-off-by: Stanley Chang Link: https://lore.kernel.org/r/20230725033318.8361-1-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-07-03T20:23:10Z

Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1. Included in here are: - Lots of USB4/Thunderbolt additions and updates for new hardware types and fixes as people are starting to get access to the hardware in the wild - new gadget controller driver, cdns2, added - new typec drivers added - xhci driver updates - typec driver updates - usbip driver fixes - usb-serial driver updates and fixes - lots of smaller USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits) usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC usb: host: xhci: Do not re-initialize the XHCI HC if being removed usb: typec: nb7vpq904m: fix CONFIG_DRM dependency usbip: usbip_host: Replace strlcpy with strscpy usb: dwc3: gadget: Propagate core init errors to UDC during pullup USB: serial: option: add LARA-R6 01B PIDs usb: ulpi: Make container_of() no-op in to_ulpi_dev() usb: gadget: legacy: fix error return code in gfs_bind usb: typec: fsa4480: add support for Audio Accessory Mode usb: typec: fsa4480: rework mux & switch setup to handle more states usb: typec: ucsi: call typec_set_mode on non-altmode partner change USB: gadget: f_hid: make hidg_class a static const structure USB: gadget: f_printer: make usb_gadget_class a static const structure USB: mon: make mon_bin_class a static const structure USB: gadget: udc: core: make udc_class a static const structure USB: roles: make role_class a static const structure dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt dt-bindings: usb: Add StarFive JH7110 USB controller dt-bindings: usb: dwc3: Add IPQ9574 compatible usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup" ...

Merge tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2023-06-29T17:46:47Z

Pull sound updates from Takashi Iwai: "Lots of changes as usual, but the only significant stuff in ALSA core part is the MIDI 2.0 support, while ASoC core kept receiving the code refactoring. The majority of changes are seen rather in device drivers, and quite a few new drivers can be found there. Here we go, some highlights: ALSA and ASoC Core: - Support of MIDI 2.0 devices: rawmidi and sequencer API have been extended for the support of the new UMP (Universal MIDI Packet) protocol, USB audio driver got the USB MIDI 2.0 interface support - Continued refactoring around ASoC DAI links and the ordering of trigger callbacks - PCM ABI extension for better drain support ASoC Drivers: - Conversions of many drivers to use maple tree based caches - Everlasting improvement works on ASoC Intel drivers - Compressed audio support for Qualcomm - Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon, Ingenic X1000, Intel systems with various CODECs, Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781 HD-audio: - Quirks for HP and ASUS machines - CS35L41 HD-audio codec fixes - Loongson HD-audio support Misc: - A new virtual PCM test driver for kselftests - Continued refactoring and improvements on the legacy emu10k1 driver" * tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits) ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook ASoC: hdmi-codec: fix channel info for compressed formats ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats ASoC: core: Always store of_node when getting DAI link component ASoC: tas2781: Fix error code in tas2781_load_calibration() ASoC: amd: update pm_runtime enable sequence ALSA: ump: Export MIDI1 / UMP conversion helpers ASoC: tas2781: fix Kconfig dependencies ASoC: amd: acp: remove acp poweroff function ASoC: amd: acp: clear pdm dma interrupt mask ASoC: codecs: max98090: Allow dsp_a mode ASoC: qcom: common: add default jack dapm pins ASoC: loongson: fix address space confusion ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints ASoC: tegra: Remove stale comments in AHUB ASoC: tegra: Use normal system sleep for ASRC ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio ASoC: fsl-asoc-card: Allow passing the number of slots in use ASoC: codecs: wsa884x: Add WSA884x family of speakers ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers ...