user/sven/linux.git/include/linux/usb, branch v6.6.92

usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS

2025-02-08T08:52:37Z

commit 4d27afbf256028a1f54363367f30efc8854433c3 upstream. The Source can drop its output voltage to the minimum of the requested PPS APDO voltage range when it is in Current Limit Mode. If this voltage falls within the range of vPpsShutdown, the Source initiates a Hard Reset and discharges Vbus. However, currently the Sink may disconnect before the voltage reaches vPpsShutdown, leading to unexpected behavior. Prevent premature disconnection by setting the Sink's disconnect threshold to the minimum vPpsShutdown value. Additionally, consider the voltage drop due to IR drop when calculating the appropriate threshold. This ensures a robust and reliable interaction between the Source and Sink during SPR PPS Current Limit Mode operation. Fixes: 4288debeaa4e ("usb: typec: tcpci: Fix up sink disconnect thresholds for PD") Cc: stable Signed-off-by: Kyle Tso Reviewed-by: Heikki Krogerus Reviewed-by: Badhri Jagan Sridharan Link: https://lore.kernel.org/r/20250114142435.2093857-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag

2025-01-09T12:31:46Z

[ Upstream commit ec841b8d73cff37f8960e209017efe1eb2fb21f2 ] Currently, the imx deivice controller has below limitations: 1. can't generate short packet interrupt if IOC not set in dTD. So if one request span more than one dTDs and only the last dTD set IOC, the usb request will pending there if no more data comes. 2. the controller can't accurately deliver data to differtent usb requests in some cases due to short packet. For example: one usb request span 3 dTDs, then if the controller received a short packet the next packet will go to 2nd dTD of current request rather than the first dTD of next request. 3. can't build a bus packet use multiple dTDs. For example: controller needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2 (312 bytes), actually the host side will see 200 bytes short packet. Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on imx platforms. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: add CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag

2025-01-09T12:31:46Z

[ Upstream commit 2978cc1f285390c1bd4d9bfc665747adc6e4b19c ] Adding CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag to modify the vbus_active parameter to active in case the ChipIdea USB IP role is device-only and there is no otgsc register. Signed-off-by: Tomer Maimon Acked-by: Peter Chen Link: https://lore.kernel.org/r/20231017195903.1665260-2-tmaimon77@gmail.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: ec841b8d73cf ("usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag") Signed-off-by: Sasha Levin

usbnet: fix cyclical race on disconnect with work queue

2024-10-04T14:29:50Z

commit 04e906839a053f092ef53f4fb2d610983412b904 upstream. The work can submit URBs and the URBs can schedule the work. This cycle needs to be broken, when a device is to be stopped. Use a flag to do so. This is a design issue as old as the driver. Signed-off-by: Oliver Neukum Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

usb: new quirk to reduce the SET_ADDRESS request timeout

2024-04-27T15:11:36Z

[ Upstream commit 5a1ccf0c72cf917ff3ccc131d1bb8d19338ffe52 ] This patch introduces a new USB quirk, USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value for the SET_ADDRESS request. The standard timeout for USB request/command is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1). However, certain scenarios, such as connecting devices through an APTIV hub, can lead to timeout errors when the device enumerates as full speed initially and later switches to high speed during chirp negotiation. In such cases, USB analyzer logs reveal that the bus suspends for 5 seconds due to incorrect chirp parsing and resumes only after two consecutive timeout errors trigger a hub driver reset. Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us) _______| Time Stamp(28 . 105 910 682) _______|_____________________________________________________________Ch0 Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us) _______| Time Stamp(28 . 106 910 632) _______|_____________________________________________________________Ch0 Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us) _______| Time Stamp(28 . 107 910 600) _______|_____________________________________________________________Ch0 Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms) _______| Time Stamp(28 . 108 532 832) _______|_____________________________________________________________Ch0 Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us) _______| Time Stamp(28 . 247 657 600) _______|_____________________________________________________________Ch0 This 5-second delay in device enumeration is undesirable, particularly in automotive applications where quick enumeration is crucial (ideally within 3 seconds). The newly introduced quirks provide the flexibility to align with a 3-second time limit, as required in specific contexts like automotive applications. By reducing the SET_ADDRESS request timeout to 500 ms, the system can respond more swiftly to errors, initiate rapid recovery, and ensure efficient device enumeration. This change is vital for scenarios where rapid smartphone enumeration and screen projection are essential. To use the quirk, please write "vendor_id:product_id:p" to /sys/bus/usb/drivers/hub/module/parameter/quirks For example, echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks" Signed-off-by: Hardik Gajjar Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: xhci: Add timeout argument in address_device USB HCD callback

2024-04-27T15:11:36Z

[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ] - The HCD address_device callback now accepts a user-defined timeout value in milliseconds, providing better control over command execution times. - The default timeout value for the address_device command has been set to 5000 ms, aligning with the USB 3.2 specification. However, this timeout can be adjusted as needed. - The xhci_setup_device function has been updated to accept the timeout value, allowing it to specify the maximum wait time for the command operation to complete. - The hub driver has also been updated to accommodate the newly added timeout parameter during the SET_ADDRESS request. Signed-off-by: Hardik Gajjar Reviewed-by: Mathias Nyman Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 5a1ccf0c72cf ("usb: new quirk to reduce the SET_ADDRESS request timeout") Signed-off-by: Sasha Levin

r8152: add vendor/device ID pair for ASUS USB-C2500

2023-12-20T16:01:42Z

[ Upstream commit 7037d95a047cd89b1f680eed253c6ab586bef1ed ] The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Kelly Kane Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

Revert "usb: phy: add usb phy notify port status API"

2023-12-03T06:33:08Z

commit 1a229d8690a0f8951fc4aa8b76a7efab0d8de342 upstream. This reverts commit a08799cf17c22375752abfad3b4a2b34b3acb287. The recently added Realtek PHY drivers depend on the new port status notification mechanism which was built on the deprecated USB PHY implementation and devicetree binding. Specifically, using these PHYs would require describing the very same PHY using both the generic "phy" property and the deprecated "usb-phy" property which is clearly wrong. We should not be building new functionality on top of the legacy USB PHY implementation even if it is currently stuck in some kind of transitional limbo. Revert the new notification interface which is broken by design. Fixes: a08799cf17c2 ("usb: phy: add usb phy notify port status API") Cc: stable@vger.kernel.org # 6.6 Cc: Stanley Chang Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20231106110654.31090-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-09-01T16:23:34Z

Pull USB / Thunderbolt / PHY driver updates from Greg KH: "Here is the big set of USB, Thunderbolt, and PHY driver updates for 6.6-rc1. Included in here are: - PHY driver additions and cleanups - Thunderbolt minor additions and fixes - USB MIDI 2 gadget support added - dwc3 driver updates and additions - Removal of some old USB wireless code that was missed when that codebase was originally removed a few years ago, cleaning up some core USB code paths - USB core potential use-after-free fixes that syzbot from different people/groups keeps tripping over - typec updates and additions - gadget fixes and cleanups - loads of smaller USB core and driver cleanups all over the place Full details are in the shortlog. All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) platform/chrome: cros_ec_typec: Configure Retimer cable type tcpm: Avoid soft reset when partner does not support get_status usb: typec: tcpm: reset counter when enter into unattached state after try role usb: typec: tcpm: set initial svdm version based on pd revision USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) usb: dwc2: add pci_device_id driver_data parse support usb: gadget: remove max support speed info in bind operation usb: gadget: composite: cleanup function config_ep_by_speed_and_alt() usb: gadget: config: remove max speed check in usb_assign_descriptors() usb: gadget: unconditionally allocate hs/ss descriptor in bind operation usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind() usb: gadget: add a inline function gether_bitrate() usb: gadget: use working speed to calcaulate network bitrate and qlen dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support usb: dwc3: exynos: Add support for Exynos850 variant usb: gadget: udc-xilinx: fix incorrect type in assignment warning usb: gadget: udc-xilinx: fix cast from restricted __le16 warning usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning USB: dwc2: hande irq on dead controller correctly ...

r8152: add vendor/device ID pair for D-Link DUB-E250

2023-08-28T19:53:40Z

The D-Link DUB-E250 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Antonio Napolitano Link: https://lore.kernel.org/r/CV200KJEEUPC.WPKAHXCQJ05I@mercurius Signed-off-by: Jakub Kicinski