user/sven/linux.git/include/linux/wait.h, branch v5.4.61

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-09-17T19:35:15Z

Pull core timer updates from Thomas Gleixner: "Timers and timekeeping updates: - A large overhaul of the posix CPU timer code which is a preparation for moving the CPU timer expiry out into task work so it can be properly accounted on the task/process. An update to the bogus permission checks will come later during the merge window as feedback was not complete before heading of for travel. - Switch the timerqueue code to use cached rbtrees and get rid of the homebrewn caching of the leftmost node. - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a single function - Implement the separation of hrtimers to be forced to expire in hard interrupt context even when PREEMPT_RT is enabled and mark the affected timers accordingly. - Implement a mechanism for hrtimers and the timer wheel to protect RT against priority inversion and live lock issues when a (hr)timer which should be canceled is currently executing the callback. Instead of infinitely spinning, the task which tries to cancel the timer blocks on a per cpu base expiry lock which is held and released by the (hr)timer expiry code. - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests resulting in faster access to timekeeping functions. - Updates to various clocksource/clockevent drivers and their device tree bindings. - The usual small improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits) posix-cpu-timers: Fix permission check regression posix-cpu-timers: Always clear head pointer on dequeue hrtimer: Add a missing bracket and hide `migration_base' on !SMP posix-cpu-timers: Make expiry_active check actually work correctly posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build tick: Mark sched_timer to expire in hard interrupt context hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n posix-cpu-timers: Utilize timerqueue for storage posix-cpu-timers: Move state tracking to struct posix_cputimers posix-cpu-timers: Deduplicate rlimit handling posix-cpu-timers: Remove pointless comparisons posix-cpu-timers: Get rid of 64bit divisions posix-cpu-timers: Consolidate timer expiry further posix-cpu-timers: Get rid of zero checks rlimit: Rewrite non-sensical RLIMIT_CPU comment posix-cpu-timers: Respect INFINITY for hard RTTIME limit posix-cpu-timers: Switch thread group sampling to array posix-cpu-timers: Restructure expiry array posix-cpu-timers: Remove cputime_expires ...

hrtimer: Consolidate hrtimer_init() + hrtimer_init_sleeper() calls

2019-08-01T15:43:15Z

hrtimer_init_sleeper() calls require prior initialisation of the hrtimer object which is embedded into the hrtimer_sleeper. Combine the initialization and spare a function call. Fixup all call sites. This is also a preparatory change for PREEMPT_RT to do hrtimer sleeper specific initializations of the embedded hrtimer without modifying any of the call sites. No functional change. [ anna-maria: Minor cleanups ] [ tglx: Adopted to the removal of the task argument of hrtimer_init_sleeper() and trivial polishing. Folded a fix from Stephen Rothwell for the vsoc code ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Anna-Maria Gleixner Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20190726185752.887468908@linutronix.de

hrtimer: Remove task argument from hrtimer_init_sleeper()

2019-07-30T21:57:51Z

All callers hand in 'current' and that's the only task pointer which actually makes sense. Remove the task argument and set current in the function. Signed-off-by: Thomas Gleixner Reviewed-by: Steven Rostedt (VMware) Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20190726185752.791885290@linutronix.de

wait: add wq_has_single_sleeper helper

2019-07-18T16:20:13Z

rq-qos sits in the io path so we want to take locks as sparingly as possible. To accomplish this we try not to take the waitqueue head lock unless we are sure we need to go to sleep, and we have an optimization to make sure that we don't starve out existing waiters. Since we check if there are existing waiters locklessly we need to be able to update our view of the waitqueue list after we've added ourselves to the waitqueue. Accomplish this by adding this helper to see if there is more than just ourselves on the list. Reviewed-by: Oleg Nesterov Signed-off-by: Josef Bacik Signed-off-by: Jens Axboe

docs: Add colon clearing sphinx warning

2019-04-09T21:14:49Z

Sphinx emits various warnings all caused by a missing colon before code block: WARNING: Block quote ends without a blank line; unexpected unindent. ERROR: Unexpected indentation. WARNING: Block quote ends without a blank line; unexpected unindent. Add the colon, clearing sphinx warnings. Signed-off-by: Tobin C. Harding Signed-off-by: Jonathan Corbet

sched/wait: Use freezable_schedule() when possible

2019-02-11T07:34:04Z

Replace 'schedule(); try_to_freeze();' with a call to freezable_schedule(). Tasks calling freezable_schedule() set the PF_FREEZER_SKIP flag before calling schedule(). Unlike tasks calling schedule(); try_to_freeze() tasks calling freezable_schedule() are not awaken by try_to_freeze_tasks(). Instead they call try_to_freeze() when they wake up if the freeze is still underway. It is not a problem since sleeping tasks can't do anything which isn't allowed for a frozen task while sleeping. The result is a potential performance gain during freeze, since less tasks have to be awaken. For instance on a bare Debian vm running a 4.19 stable kernel, the number of tasks skipped in freeze_task() went up from 12 without the patch to 32 with the patch (out of 448), an increase of > x2.5. Signed-off-by: Hugo Lefeuvre Reviewed-by: Joel Fernandes (Google) Cc: Joel Fernandes Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20190207200352.GA27859@behemoth.owl.eu.com.local Signed-off-by: Ingo Molnar

scsi: sched/wait: Add wait_event_lock_irq_timeout for TASK_UNINTERRUPTIBLE usage

2018-10-16T04:11:13Z

Short of reverting commit 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") for v4.19, target-core needs a wait_event_t macro can be executed using TASK_UNINTERRUPTIBLE to function correctly with existing fabric drivers that expect to run with signals pending during session shutdown and active se_cmd I/O quiesce. The most notable is iscsi-target/iser-target, while ibmvscsi_tgt invokes session shutdown logic from userspace via configfs attribute that could also potentially have signals pending. So go ahead and introduce wait_event_lock_irq_timeout() to achieve this, and update + rename __wait_event_lock_irq_timeout() to make it accept 'state' as a parameter. Fixes: 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") Cc: # v4.19+ Cc: Bart Van Assche Cc: Mike Christie Cc: Hannes Reinecke Cc: Christoph Hellwig Cc: Sagi Grimberg Cc: Bryant G. Ly Cc: Peter Zijlstra (Intel) Tested-by: Nicholas Bellinger Signed-off-by: Nicholas Bellinger Reviewed-by: Bryant G. Ly Acked-by: Peter Zijlstra (Intel) Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen

sched/wait: add wait_event_idle() functions.

2018-02-16T14:19:09Z

The new TASK_IDLE state (TASK_UNINTERRUPTIBLE | __TASK_NOLOAD) is not much used. One way to make it easier to use is to add wait_event*() family functions that make use of it. This patch adds: wait_event_idle() wait_event_idle_timeout() wait_event_idle_exclusive() wait_event_idle_exclusive_timeout() This set was chosen because lustre needs them before it can discard its own l_wait_event() macro. Acked-by: Peter Zijlstra (Intel) Reviewed-by: James Simmons Signed-off-by: NeilBrown Reviewed-by: Patrick Farrell Signed-off-by: Greg Kroah-Hartman

annotate poll-related wait keys

2017-11-27T21:19:54Z

__poll_t is also used as wait key in some waitqueues. Verify that wait_..._poll() gets __poll_t as key and provide a helper for wakeup functions to get back to that __poll_t value. Signed-off-by: Al Viro

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman