user/sven/linux.git/include/linux, branch stable/4.13.y

mm/page_alloc.c: broken deferred calculation

2017-11-24T07:35:59Z

commit d135e5750205a21a212a19dbb05aeb339e2cbea7 upstream. In reset_deferred_meminit() we determine number of pages that must not be deferred. We initialize pages for at least 2G of memory, but also pages for reserved memory in this node. The reserved memory is determined in this function: memblock_reserved_memory_within(), which operates over physical addresses, and returns size in bytes. However, reset_deferred_meminit() assumes that that this function operates with pfns, and returns page count. The result is that in the best case machine boots slower than expected due to initializing more pages than needed in single thread, and in the worst case panics because fewer than needed pages are initialized early. Link: http://lkml.kernel.org/r/20171021011707.15191-1-pasha.tatashin@oracle.com Fixes: 864b9a393dcb ("mm: consider memblock reservations for deferred memory initialization sizing") Signed-off-by: Pavel Tatashin Acked-by: Michal Hocko Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed

2017-11-24T07:35:55Z

[ Upstream commit 2b5ec1a5f9738ee7bf8f5ec0526e75e00362c48f ] When run ipvs in two different network namespace at the same host, and one ipvs transport network traffic to the other network namespace ipvs. 'ipvs_property' flag will make the second ipvs take no effect. So we should clear 'ipvs_property' when SKB network namespace changed. Fixes: 621e84d6f373 ("dev: introduce skb_scrub_packet()") Signed-off-by: Ye Yin Signed-off-by: Wei Zhou Signed-off-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tap: reference to KVA of an unloaded module causes kernel panic

2017-11-18T10:30:38Z

[ Upstream commit dea6e19f4ef746aa18b4c33d1a7fed54356796ed ] The commit 9a393b5d5988 ("tap: tap as an independent module") created a separate tap module that implements tap functionality and exports interfaces that will be used by macvtap and ipvtap modules to create create respective tap devices. However, that patch introduced a regression wherein the modules macvtap and ipvtap can be removed (through modprobe -r) while there are applications using the respective /dev/tapX devices. These applications cause kernel to hold reference to /dev/tapX through 'struct cdev macvtap_cdev' and 'struct cdev ipvtap_dev' defined in macvtap and ipvtap modules respectively. So, when the application is later closed the kernel panics because we are referencing KVA that is present in the unloaded modules. ----------8<------- Example ----------8<---------- $ sudo ip li add name mv0 link enp7s0 type macvtap $ sudo ip li show mv0 |grep mv0| awk -e '{print $1 $2}' 14:mv0@enp7s0: $ cat /dev/tap14 & $ lsmod |egrep -i 'tap|vlan' macvtap 16384 0 macvlan 24576 1 macvtap tap 24576 3 macvtap $ sudo modprobe -r macvtap $ fg cat /dev/tap14 ^C <...system panics...> BUG: unable to handle kernel paging request at ffffffffa038c500 IP: cdev_put+0xf/0x30 ----------8<-----------------8<---------- The fix is to set cdev.owner to the module that creates the tap device (either macvtap or ipvtap). With this set, the operations (in fs/char_dev.c) on char device holds and releases the module through cdev_get() and cdev_put() and will not allow the module to unload prematurely. Fixes: 9a393b5d5988ea4e (tap: tap as an independent module) Signed-off-by: Girish Moodalbail Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tun: call dev_get_valid_name() before register_netdevice()

2017-11-18T10:30:36Z

[ Upstream commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d ] register_netdevice() could fail early when we have an invalid dev name, in which case ->ndo_uninit() is not called. For tun device, this is a problem because a timer etc. are already initialized and it expects ->ndo_uninit() to clean them up. We could move these initializations into a ->ndo_init() so that register_netdevice() knows better, however this is still complicated due to the logic in tun_detach(). Therefore, I choose to just call dev_get_valid_name() before register_netdevice(), which is quicker and much easier to audit. And for this specific case, it is already enough. Fixes: 96442e42429e ("tuntap: choose the txq based on rxq") Reported-by: Dmitry Alexeev Cc: Jason Wang Cc: "Michael S. Tsirkin" Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mm, swap: fix race between swap count continuation operations

2017-11-08T09:17:18Z

commit 2628bd6fc052bd85e9864dae4de494d8a6313391 upstream. One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" Cc: Johannes Weiner Cc: Shaohua Li Cc: Tim Chen Cc: Michal Hocko Cc: Aaron Lu Cc: Dave Hansen Cc: Andi Kleen Cc: Minchan Kim Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

KEYS: Fix race between updating and finding a negative key

2017-10-27T08:39:15Z

commit 363b02dab09b3226f3bd1420dad9c72b79a42a76 upstream. Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection error into one field such that: (1) The instantiation state can be modified/read atomically. (2) The error can be accessed atomically with the state. (3) The error isn't stored unioned with the payload pointers. This deals with the problem that the state is spread over three different objects (two bits and a separate variable) and reading or updating them atomically isn't practical, given that not only can uninstantiated keys change into instantiated or rejected keys, but rejected keys can also turn into instantiated keys - and someone accessing the key might not be using any locking. The main side effect of this problem is that what was held in the payload may change, depending on the state. For instance, you might observe the key to be in the rejected state. You then read the cached error, but if the key semaphore wasn't locked, the key might've become instantiated between the two reads - and you might now have something in hand that isn't actually an error code. The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error code if the key is negatively instantiated. The key_is_instantiated() function is replaced with key_is_positive() to avoid confusion as negative keys are also 'instantiated'. Additionally, barriering is included: (1) Order payload-set before state-set during instantiation. (2) Order state-read before payload-read when using the key. Further separate barriering is necessary if RCU is being used to access the payload content after reading the payload pointers. Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data") Reported-by: Eric Biggers Signed-off-by: David Howells Reviewed-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman

bus: mbus: fix window size calculation for 4GB windows

2017-10-27T08:39:14Z

commit 2bbbd96357ce76cc45ec722c00f654aa7b189112 upstream. At least the Armada XP SoC supports 4GB on a single DRAM window. Because the size register values contain the actual size - 1, the MSB is set in that case. For example, the SDRAM window's control register's value is 0xffffffe1 for 4GB (bits 31 to 24 contain the size). The MBUS driver reads back each window's size from registers and calculates the actual size as (control_reg | ~DDR_SIZE_MASK) + 1, which overflows for 32 bit values, resulting in other miscalculations further on (a bad RAM window for the CESA crypto engine calculated by mvebu_mbus_setup_cpu_target_nooverlap() in my case). This patch changes the type in 'struct mbus_dram_window' from u32 to u64, which allows us to keep using the same register calculation code in most MBUS-using drivers (which calculate ->size - 1 again). Fixes: fddddb52a6c4 ("bus: introduce an Marvell EBU MBus driver") Signed-off-by: Jan Luebbe Signed-off-by: Gregory CLEMENT Signed-off-by: Greg Kroah-Hartman

vmbus: eliminate duplicate cached index

2017-10-21T15:55:07Z

commit 05d00bc94ac27d220d8a78e365d7fa3a26dcca17 upstream. Don't need cached read index anymore now that packet iterator is used. The iterator has the original read index until the visible read_index is updated. Signed-off-by: Stephen Hemminger Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman

vmbus: refactor hv_signal_on_read

2017-10-21T15:55:07Z

commit 8dd45f2ab005a1f3301296059b23b03ec3dbf79b upstream. The function hv_signal_on_read was defined in hyperv.h and only used in one place in ring_buffer code. Clearer to just move it inline there. Signed-off-by: Stephen Hemminger Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: Fix bugs in rescind handling

2017-10-21T15:55:06Z

commit 192b2d78722ffea188e5ec6ae5d55010dce05a4b upstream. This patch addresses the following bugs in the current rescind handling code: 1. Fixes a race condition where we may be invoking hv_process_channel_removal() on an already freed channel. 2. Prevents indefinite wait when rescinding sub-channels by correctly setting the probe_complete state. I would like to thank Dexuan for patiently reviewing earlier versions of this patch and identifying many of the issues fixed here. Greg, please apply this to 4.14-final. Fixes: '54a66265d675 ("Drivers: hv: vmbus: Fix rescind handling")' Signed-off-by: K. Y. Srinivasan Reviewed-by: Dexuan Cui Signed-off-by: Greg Kroah-Hartman