user/sven/linux.git/include/linux, branch v3.2.90

mm: larger stack guard gap, between vmas

2017-07-02T16:12:47Z

commit 1be7107fbe18eed3e319a6c3e83c78254b693acb upstream. Stack guard page is a useful feature to reduce a risk of stack smashing into a different mapping. We have been using a single page gap which is sufficient to prevent having stack adjacent to a different mapping. But this seems to be insufficient in the light of the stack usage in userspace. E.g. glibc uses as large as 64kB alloca() in many commonly used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX] which is 256kB or stack strings with MAX_ARG_STRLEN. This will become especially dangerous for suid binaries and the default no limit for the stack size limit because those applications can be tricked to consume a large portion of the stack and a single glibc call could jump over the guard page. These attacks are not theoretical, unfortunatelly. Make those attacks less probable by increasing the stack guard gap to 1MB (on systems with 4k pages; but make it depend on the page size because systems with larger base pages might cap stack allocations in the PAGE_SIZE units) which should cover larger alloca() and VLA stack allocations. It is obviously not a full fix because the problem is somehow inherent, but it should reduce attack space a lot. One could argue that the gap size should be configurable from userspace, but that can be done later when somebody finds that the new 1MB is wrong for some special case applications. For now, add a kernel command line option (stack_guard_gap) to specify the stack gap size (in page units). Implementation wise, first delete all the old code for stack guard page: because although we could get away with accounting one extra page in a stack vma, accounting a larger gap can break userspace - case in point, a program run with "ulimit -S -v 20000" failed when the 1MB gap was counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK and strict non-overcommit mode. Instead of keeping gap inside the stack vma, maintain the stack guard gap as a gap between vmas: using vm_start_gap() in place of vm_start (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few places which need to respect the gap - mainly arch_get_unmapped_area(), and and the vma tree's subtree_gap support for that. Original-patch-by: Oleg Nesterov Original-patch-by: Michal Hocko Signed-off-by: Hugh Dickins Acked-by: Michal Hocko Tested-by: Helge Deller # parisc Signed-off-by: Linus Torvalds [Hugh Dickins: Backported to 3.2] [bwh: Fix more instances of vma->vm_start in sparc64 impl. of arch_get_unmapped_area_topdown() and generic impl. of hugetlb_get_unmapped_area()] Signed-off-by: Ben Hutchings

nlm: Ensure callback code also checks that the files match

2017-06-05T20:13:48Z

commit 251af29c320d86071664f02c76f0d063a19fefdf upstream. It is not sufficient to just check that the lock pids match when granting a callback, we also need to ensure that we're granting the callback on the right file. Reported-by: Pankaj Singh Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker [bwh: Backported to 3.2: open-code file_inode()] Signed-off-by: Ben Hutchings

list: introduce list_first_entry_or_null

2017-03-16T02:18:59Z

commit 6d7581e62f8be462440d7b22c6361f7c9fa4902b upstream. non-rcu variant of list_first_or_null_rcu Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

can: Fix kernel panic at security_sock_rcv_skb

2017-03-16T02:18:56Z

[ Upstream commit f1712c73714088a7252d276a57126d56c7d37e64 ] Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: [] security_sock_rcv_skb+0x4c/0x60 [] sk_filter+0x41/0x210 [] sock_queue_rcv_skb+0x53/0x3a0 [] raw_rcv+0x2a3/0x3c0 [] can_rcv_filter+0x12b/0x370 [] can_receive+0xd9/0x120 [] can_rcv+0xab/0x100 [] __netif_receive_skb_core+0xd8c/0x11f0 [] __netif_receive_skb+0x24/0xb0 [] process_backlog+0x127/0x280 [] net_rx_action+0x33b/0x4f0 [] __do_softirq+0x184/0x440 [] do_softirq_own_stack+0x1c/0x30 [] do_softirq.part.18+0x3b/0x40 [] do_softirq+0x1d/0x20 [] netif_rx_ni+0xe5/0x110 [] slcan_receive_buf+0x507/0x520 [] flush_to_ldisc+0x21c/0x230 [] process_one_work+0x24f/0x670 [] worker_thread+0x9d/0x6f0 [] ? rescuer_thread+0x480/0x480 [] kthread+0x12c/0x150 [] ret_from_fork+0x3f/0x70 Reported-by: Zhang Yanmin Signed-off-by: Eric Dumazet Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

gro: Disable frag0 optimization on IPv6 ext headers

2017-03-16T02:18:42Z

commit 57ea52a865144aedbcd619ee0081155e658b6f7d upstream. The GRO fast path caches the frag0 address. This address becomes invalid if frag0 is modified by pskb_may_pull or its variants. So whenever that happens we must disable the frag0 optimization. This is usually done through the combination of gro_header_hard and gro_header_slow, however, the IPv6 extension header path did the pulling directly and would continue to use the GRO fast path incorrectly. This patch fixes it by disabling the fast path when we enter the IPv6 extension header path. Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address") Reported-by: Slava Shwartsman Signed-off-by: Herbert Xu Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings

hotplug: Make register and unregister notifier API symmetric

2017-03-16T02:18:29Z

commit 777c6e0daebb3fcefbbd6f620410a946b07ef6d0 upstream. Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its notifiers when HOTPLUG_CPU=y while the registration might succeed even when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap might keep a stale notifier on the list on the manual clean up during the pool tear down and thus corrupt the list. Resulting in the following [ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78 [ 144.971337] IP: [] raw_notifier_chain_register+0x1b/0x40 [ 145.122628] Call Trace: [ 145.125086] [] __register_cpu_notifier+0x18/0x20 [ 145.131350] [] zswap_pool_create+0x273/0x400 [ 145.137268] [] __zswap_param_set+0x1fc/0x300 [ 145.143188] [] ? trace_hardirqs_on+0xd/0x10 [ 145.149018] [] ? kernel_param_lock+0x28/0x30 [ 145.154940] [] ? __might_fault+0x4f/0xa0 [ 145.160511] [] zswap_compressor_param_set+0x17/0x20 [ 145.167035] [] param_attr_store+0x5c/0xb0 [ 145.172694] [] module_attr_store+0x1d/0x30 [ 145.178443] [] sysfs_kf_write+0x4f/0x70 [ 145.183925] [] kernfs_fop_write+0x149/0x180 [ 145.189761] [] __vfs_write+0x18/0x40 [ 145.194982] [] vfs_write+0xb2/0x1a0 [ 145.200122] [] SyS_write+0x52/0xa0 [ 145.205177] [] entry_SYSCALL_64_fastpath+0x12/0x17 This can be even triggered manually by changing /sys/module/zswap/parameters/compressor multiple times. Fix this issue by making unregister APIs symmetric to the register so there are no surprises. Fixes: 47e627bc8c9a ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU") Reported-and-tested-by: Yu Zhao Signed-off-by: Michal Hocko Cc: linux-mm@kvack.org Cc: Andrew Morton Cc: Dan Streetman Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.org Signed-off-by: Thomas Gleixner [bwh: Backported to 3.2: - The lockless (__-prefixed) variants don't exist - Keep definition of cpu_notify_nofail() conditional on CONFIG_HOTPLUG_CPU] Signed-off-by: Ben Hutchings

rose: limit sk_filter trim to payload

2017-02-23T03:51:05Z

commit f4979fcea7fd36d8e2f556abef86f80e0d5af1ba upstream. Sockets can have a filter program attached that drops or trims incoming packets based on the filter program return value. Rose requires data packets to have at least ROSE_MIN_LEN bytes. It verifies this on arrival in rose_route_frame and unconditionally pulls the bytes in rose_recvmsg. The filter can trim packets to below this value in-between, causing pull to fail, leaving the partial header at the time of skb_copy_datagram_msg. Place a lower bound on the size to which sk_filter may trim packets by introducing sk_filter_trim_cap and call this for rose packets. Signed-off-by: Willem de Bruijn Acked-by: Daniel Borkmann Signed-off-by: David S. Miller [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

lockdep: Silence warning if CONFIG_LOCKDEP isn't set

2017-02-23T03:51:04Z

commit 5cd3f5affad2109fd1458aab3f6216f2181e26ea upstream. Since commit c9a4962881929df7f1ef6e63e1b9da304faca4dd ("nfsd: make client_lock per net") compiling nfs4state.o without CONFIG_LOCKDEP set, triggers this GCC warning: fs/nfsd/nfs4state.c: In function ‘free_client’: fs/nfsd/nfs4state.c:1051:19: warning: unused variable ‘nn’ [-Wunused-variable] The cause of that warning is that lockdep_assert_held() compiles away if CONFIG_LOCKDEP is not set. Silence this warning by using the argument to lockdep_assert_held() as a nop if CONFIG_LOCKDEP is not set. Signed-off-by: Paul Bolle Cc: Peter Zijlstra Cc: Stanislav Kinsbursky Cc: J. Bruce Fields Link: http://lkml.kernel.org/r/1359060797.1325.33.camel@x61.thuisdomein Signed-off-by: Ingo Molnar [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

can: raw: raw_setsockopt: limit number of can_filter that can be set

2017-02-23T03:51:02Z

commit 332b05ca7a438f857c61a3c21a88489a21532364 upstream. This patch adds a check to limit the number of can_filters that can be set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER are not prevented resulting in a warning. Reference: https://lkml.org/lkml/2016/12/2/230 Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Marc Kleine-Budde [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings

posix_acl: Clear SGID bit when setting file permissions

2016-11-20T01:01:44Z

commit 073931017b49d9458aa351605b43a7e34598caef upstream. When file permissions are modified via chmod(2) and the user is not in the owning group or capable of CAP_FSETID, the setgid bit is cleared in inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file permissions as well as the new ACL, but doesn't clear the setgid bit in a similar way; this allows to bypass the check in chmod(2). Fix that. References: CVE-2016-7097 Reviewed-by: Christoph Hellwig Reviewed-by: Jeff Layton Signed-off-by: Jan Kara Signed-off-by: Andreas Gruenbacher [bwh: Backported to 3.2: - Drop changes to ceph, f2fs, hfsplus, orangefs - Use capable() instead of capable_wrt_inode_uidgid() - Update ext3 and generic_acl.c as well - In gfs2, jfs, and xfs, take care to avoid leaking the allocated ACL if posix_acl_update_mode() determines it's not needed - Adjust context] Signed-off-by: Ben Hutchings