user/sven/linux.git/include/linux, branch v4.10.16

block: get rid of blk_integrity_revalidate()

2017-05-14T12:08:30Z

commit 19b7ccf8651df09d274671b53039c672a52ad84d upstream. Commit 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" Cc: Christoph Hellwig Cc: Mike Snitzer Tested-by: Dan Williams Signed-off-by: Ilya Dryomov [idryomov@gmail.com: backport to < 4.11: bdi is embedded in queue] Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

f2fs: sanity check segment count

2017-05-14T12:08:30Z

commit b9dd46188edc2f0d1f37328637860bb65a771124 upstream. F2FS uses 4 bytes to represent block address. As a result, supported size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments. Signed-off-by: Jin Qian Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Handle extcon events properly

2017-05-14T12:08:25Z

commit a89b94b53371bbfa582787c2fa3378000ea4263d upstream. We're currently emulating the vbus and id interrupts in the OTGSC read API, but we also need to make sure that if we're handling the events with extcon that we don't enable the interrupts for those events in the hardware. Therefore, properly emulate this register if we're using extcon, but don't enable the interrupts. This allows me to get my cable connect/disconnect working properly without getting spurious interrupts on my device that uses an extcon for these two events. Acked-by: Peter Chen Cc: Greg Kroah-Hartman Cc: "Ivan T. Ivanov" Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

net: phy: fix auto-negotiation stall due to unavailable interrupt

2017-05-03T15:37:42Z

[ Upstream commit f555f34fdc586a56204cd16d9a7c104ec6cb6650 ] The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by: Alexander Kochetkov Cc: stable # v4.9+ Tested-by: Roger Quadros Tested-by: Alexandre Belloni Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: mark skbs with SCM_TIMESTAMPING_OPT_STATS

2017-05-03T15:37:41Z

[ Upstream commit 4ef1b2869447411ad3ef91ad7d4891a83c1a509a ] SOF_TIMESTAMPING_OPT_STATS can be enabled and disabled while packets are collected on the error queue. So, checking SOF_TIMESTAMPING_OPT_STATS in sk->sk_tsflags is not enough to safely assume that the skb contains OPT_STATS data. Add a bit in sock_exterr_skb to indicate whether the skb contains opt_stats data. Fixes: 1c885808e456 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by: JongHwan Kim Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Eric Dumazet Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

new privimitive: iov_iter_revert()

2017-04-21T07:32:40Z

commit 27c0e3748e41ca79171ffa3e97415a20af6facd0 upstream. opposite to iov_iter_advance(); the caller is responsible for never using it to move back past the initial position. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups

2017-04-21T07:32:36Z

commit 77f88796cee819b9c4562b0b6b44691b3b7755b1 upstream. Creation of a kthread goes through a couple interlocked stages between the kthread itself and its creator. Once the new kthread starts running, it initializes itself and wakes up the creator. The creator then can further configure the kthread and then let it start doing its job by waking it up. In this configuration-by-creator stage, the creator is the only one that can wake it up but the kthread is visible to userland. When altering the kthread's attributes from userland is allowed, this is fine; however, for cases where CPU affinity is critical, kthread_bind() is used to first disable affinity changes from userland and then set the affinity. This also prevents the kthread from being migrated into non-root cgroups as that can affect the CPU affinity and many other things. Unfortunately, the cgroup side of protection is racy. While the PF_NO_SETAFFINITY flag prevents further migrations, userland can win the race before the creator sets the flag with kthread_bind() and put the kthread in a non-root cgroup, which can lead to all sorts of problems including incorrect CPU affinity and starvation. This bug got triggered by userland which periodically tries to migrate all processes in the root cpuset cgroup to a non-root one. Per-cpu workqueue workers got caught while being created and ended up with incorrected CPU affinity breaking concurrency management and sometimes stalling workqueue execution. This patch adds task->no_cgroup_migration which disallows the task to be migrated by userland. kthreadd starts with the flag set making every child kthread start in the root cgroup with migration disallowed. The flag is cleared after the kthread finishes initialization by which time PF_NO_SETAFFINITY is set if the kthread should stay in the root cgroup. It'd be better to wait for the initialization instead of failing but I couldn't think of a way of implementing that without adding either a new PF flag, or sleeping and retrying from waiting side. Even if userland depends on changing cgroup membership of a kthread, it either has to be synchronized with kthread_create() or periodically repeat, so it's unlikely that this would break anything. v2: Switch to a simpler implementation using a new task_struct bit field suggested by Oleg. Signed-off-by: Tejun Heo Suggested-by: Oleg Nesterov Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra (Intel) Cc: Thomas Gleixner Reported-and-debugged-by: Chris Mason Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports

2017-04-12T10:42:12Z

[ Upstream commit 72f2ff0deb870145a5a2d24cd75b4f9936159a62 ] The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it cannot generate MSIs. It can transfer MSI/MSI-X from downstream devices, but does not support MSI/MSI-X itself. Add a quirk to prevent use of MSI/MSI-X by the Root Port. [bhelgaas: changelog, sort vendor ID #define, drop device ID #define] Signed-off-by: Dongdong Liu Signed-off-by: Bjorn Helgaas Reviewed-by: Gabriele Paoloni Reviewed-by: Zhou Wang Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: smccc: Update HVC comment to describe new quirk parameter

2017-04-12T10:42:12Z

[ Upstream commit 3046ec674d441562c6bb3e4284cd866743042ef3 ] Commit 680a0873e193 ("arm: kernel: Add SMC structure parameter") added a new "quirk" parameter to the SMC and HVC SMCCC backends, but only updated the comment for the SMC version. This patch adds the new paramater to the comment describing the HVC version too. Signed-off-by: Will Deacon Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

firmware: qcom: scm: Fix interrupted SCM calls

2017-04-12T10:42:11Z

[ Upstream commit 82bcd087029f6056506ea929f11af02622230901 ] This patch adds a Qualcomm specific quirk to the arm_smccc_smc call. On Qualcomm ARM64 platforms, the SMC call can return before it has completed. If this occurs, the call can be restarted, but it requires using the returned session ID value from the interrupted SMC call. The quirk stores off the session ID from the interrupted call in the quirk structure so that it can be used by the caller. This patch folds in a fix given by Sricharan R: https://lkml.org/lkml/2016/9/28/272 Signed-off-by: Andy Gross Reviewed-by: Will Deacon Signed-off-by: Will Deacon Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman