user/sven/linux.git/include/linux, branch v4.12

moduleparam: fix doc: hwparam_irq configures an IRQ

2017-07-02T22:37:23Z

Signed-off-by: Sylvain 'ythier' Hitier Signed-off-by: Linus Torvalds

hashtable: remove repeated phrase from a comment

2017-06-30T20:49:53Z

"in a rcu enabled hashtable" is repeated twice in a comment. Signed-off-by: Jakub Kicinski Signed-off-by: Linus Torvalds

block: provide bio_uninit() free freeing integrity/task associations

2017-06-28T21:30:13Z

Wen reports significant memory leaks with DIF and O_DIRECT: "With nvme devive + T10 enabled, On a system it has 256GB and started logging /proc/meminfo & /proc/slabinfo for every minute and in an hour it increased by 15968128 kB or ~15+GB.. Approximately 256 MB / minute leaking. /proc/meminfo | grep SUnreclaim... SUnreclaim: 6752128 kB SUnreclaim: 6874880 kB SUnreclaim: 7238080 kB .... SUnreclaim: 22307264 kB SUnreclaim: 22485888 kB SUnreclaim: 22720256 kB When testcases with T10 enabled call into __blkdev_direct_IO_simple, code doesn't free memory allocated by bio_integrity_alloc. The patch fixes the issue. HTX has been run with +60 hours without failure." Since __blkdev_direct_IO_simple() allocates the bio on the stack, it doesn't go through the regular bio free. This means that any ancillary data allocated with the bio through the stack is not freed. Hence, we can leak the integrity data associated with the bio, if the device is using DIF/DIX. Fix this by providing a bio_uninit() and export it, so that we can use it to free this data. Note that this is a minimal fix for this issue. Any current user of bio's that are allocated outside of bio_alloc_bioset() suffers from this issue, most notably some drivers. We will fix those in a more comprehensive patch for 4.13. This also means that the commit marked as being fixed by this isn't the real culprit, it's just the most obvious one out there. Fixes: 542ff7bf18c6 ("block: new direct I/O implementation") Reported-by: Wen Xiong Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-06-25T18:59:19Z

Pull timer fixes from Thomas Gleixner: "A few fixes for timekeeping and timers: - Plug a subtle race due to a missing READ_ONCE() in the timekeeping code where reloading of a pointer results in an inconsistent callback argument being supplied to the clocksource->read function. - Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the time keeping core code, to prevent a possible discontuity. - Apply a similar fix to the arm64 vdso clock_gettime() implementation - Add missing includes to clocksource drivers, which relied on indirect includes which fails in certain configs. - Use the proper iomem pointer for read/iounmap in a probe function" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting time: Fix clock->read(clock) race around clocksource changes clocksource: Explicitly include linux/clocksource.h when needed clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable

slub: make sysfs file removal asynchronous

2017-06-23T23:15:55Z

Commit bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") made slub sysfs file removals synchronous to kmem_cache shutdown. Unfortunately, this created a possible ABBA deadlock between slab_mutex and sysfs draining mechanism triggering the following lockdep warning. ====================================================== [ INFO: possible circular locking dependency detected ] 4.10.0-test+ #48 Not tainted ------------------------------------------------------- rmmod/1211 is trying to acquire lock: (s_active#120){++++.+}, at: [] kernfs_remove+0x23/0x40 but task is already holding lock: (slab_mutex){+.+.+.}, at: [] kmem_cache_destroy+0x41/0x2d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.+.}: lock_acquire+0xf6/0x1f0 __mutex_lock+0x75/0x950 mutex_lock_nested+0x1b/0x20 slab_attr_store+0x75/0xd0 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x13c/0x1c0 __vfs_write+0x28/0x120 vfs_write+0xc8/0x1e0 SyS_write+0x49/0xa0 entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #0 (s_active#120){++++.+}: __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(s_active#120); lock(slab_mutex); lock(s_active#120); *** DEADLOCK *** 2 locks held by rmmod/1211: #0: (cpu_hotplug.dep_map){++++++}, at: [] get_online_cpus+0x37/0x80 #1: (slab_mutex){+.+.+.}, at: [] kmem_cache_destroy+0x41/0x2d0 stack backtrace: CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 Call Trace: print_circular_bug+0x1be/0x210 __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 ? SyS_delete_module+0x5/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 It'd be the cleanest to deal with the issue by removing sysfs files without holding slab_mutex before the rest of shutdown; however, given the current code structure, it is pretty difficult to do so. This patch punts sysfs file removal to a work item. Before commit bf5eb3de3847, the removal was punted to a RCU delayed work item which is executed after release. Now, we're punting to a different work item on shutdown which still maintains the goal removing the sysfs files earlier when destroying kmem_caches. Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org Fixes: bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") Signed-off-by: Tejun Heo Reported-by: Steven Rostedt (VMware) Tested-by: Steven Rostedt (VMware) Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

2017-06-22T05:15:00Z

Pull block fixes from Jens Axboe: "This contains a set of fixes for xen-blkback by way of Konrad, and a performance regression fix for blk-mq for shared tags. The latter could account for as much as a 50x reduction in performance, with the test case from the user with 500 name spaces. A more realistic setup on my end with 32 drives showed a 3.5x drop. The fix has been thoroughly tested before being committed" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: fix performance regression with shared tags xen-blkback: don't leak stack data via response ring xen/blkback: don't use xen_blkif_get() in xen-blkback kthread xen/blkback: don't free be structure too early xen/blkback: fix disconnect while I/Os in flight

blk-mq: fix performance regression with shared tags

2017-06-21T16:17:49Z

If we have shared tags enabled, then every IO completion will trigger a full loop of every queue belonging to a tag set, and every hardware queue for each of those queues, even if nothing needs to be done. This causes a massive performance regression if you have a lot of shared devices. Instead of doing this huge full scan on every IO, add an atomic counter to the main queue that tracks how many hardware queues have been marked as needing a restart. With that, we can avoid looking for restartable queues, if we don't have to. Max reports that this restores performance. Before this patch, 4K IOPS was limited to 22-23K IOPS. With the patch, we are running at 950-970K IOPS. Fixes: 6d8c6c0f97ad ("blk-mq: Restart a single queue if tag sets are shared") Reported-by: Max Gurtovoy Tested-by: Max Gurtovoy Reviewed-by: Bart Van Assche Tested-by: Bart Van Assche Signed-off-by: Jens Axboe

time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting

2017-06-20T08:41:50Z

Due to how the MONOTONIC_RAW accumulation logic was handled, there is the potential for a 1ns discontinuity when we do accumulations. This small discontinuity has for the most part gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW in their vDSO clock_gettime implementation, we've seen failures with the inconsistency-check test in kselftest. This patch addresses the issue by using the same sub-ns accumulation handling that CLOCK_MONOTONIC uses, which avoids the issue for in-kernel users. Since the ARM64 vDSO implementation has its own clock_gettime calculation logic, this patch reduces the frequency of errors, but failures are still seen. The ARM64 vDSO will need to be updated to include the sub-nanosecond xtime_nsec values in its calculation for this issue to be completely fixed. Signed-off-by: John Stultz Tested-by: Daniel Mentz Cc: Prarit Bhargava Cc: Kevin Brodsky Cc: Richard Cochran Cc: Stephen Boyd Cc: Will Deacon Cc: "stable #4 . 8+" Cc: Miroslav Lichvar Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner

time: Fix clock->read(clock) race around clocksource changes

2017-06-20T08:41:50Z

In tests, which excercise switching of clocksources, a NULL pointer dereference can be observed on AMR64 platforms in the clocksource read() function: u64 clocksource_mmio_readl_down(struct clocksource *c) { return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask; } This is called from the core timekeeping code via: cycle_now = tkr->read(tkr->clock); tkr->read is the cached tkr->clock->read() function pointer. When the clocksource is changed then tkr->clock and tkr->read are updated sequentially. The code above results in a sequential load operation of tkr->read and tkr->clock as well. If the store to tkr->clock hits between the loads of tkr->read and tkr->clock, then the old read() function is called with the new clock pointer. As a consequence the read() function dereferences a different data structure and the resulting 'reg' pointer can point anywhere including NULL. This problem was introduced when the timekeeping code was switched over to use struct tk_read_base. Before that, it was theoretically possible as well when the compiler decided to reload clock in the code sequence: now = tk->clock->read(tk->clock); Add a helper function which avoids the issue by reading tk_read_base->clock once into a local variable clk and then issue the read function via clk->read(clk). This guarantees that the read() function always gets the proper clocksource pointer handed in. Since there is now no use for the tkr.read pointer, this patch also removes it, and to address stopping the fast timekeeper during suspend/resume, it introduces a dummy clocksource to use rather then just a dummy read function. Signed-off-by: John Stultz Acked-by: Ingo Molnar Cc: Prarit Bhargava Cc: Richard Cochran Cc: Stephen Boyd Cc: stable Cc: Miroslav Lichvar Cc: Daniel Mentz Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner

mm: larger stack guard gap, between vmas

2017-06-19T13:50:20Z

Stack guard page is a useful feature to reduce a risk of stack smashing into a different mapping. We have been using a single page gap which is sufficient to prevent having stack adjacent to a different mapping. But this seems to be insufficient in the light of the stack usage in userspace. E.g. glibc uses as large as 64kB alloca() in many commonly used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX] which is 256kB or stack strings with MAX_ARG_STRLEN. This will become especially dangerous for suid binaries and the default no limit for the stack size limit because those applications can be tricked to consume a large portion of the stack and a single glibc call could jump over the guard page. These attacks are not theoretical, unfortunatelly. Make those attacks less probable by increasing the stack guard gap to 1MB (on systems with 4k pages; but make it depend on the page size because systems with larger base pages might cap stack allocations in the PAGE_SIZE units) which should cover larger alloca() and VLA stack allocations. It is obviously not a full fix because the problem is somehow inherent, but it should reduce attack space a lot. One could argue that the gap size should be configurable from userspace, but that can be done later when somebody finds that the new 1MB is wrong for some special case applications. For now, add a kernel command line option (stack_guard_gap) to specify the stack gap size (in page units). Implementation wise, first delete all the old code for stack guard page: because although we could get away with accounting one extra page in a stack vma, accounting a larger gap can break userspace - case in point, a program run with "ulimit -S -v 20000" failed when the 1MB gap was counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK and strict non-overcommit mode. Instead of keeping gap inside the stack vma, maintain the stack guard gap as a gap between vmas: using vm_start_gap() in place of vm_start (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few places which need to respect the gap - mainly arch_get_unmapped_area(), and and the vma tree's subtree_gap support for that. Original-patch-by: Oleg Nesterov Original-patch-by: Michal Hocko Signed-off-by: Hugh Dickins Acked-by: Michal Hocko Tested-by: Helge Deller # parisc Signed-off-by: Linus Torvalds