user/sven/linux.git/include/linux, branch v4.14.236

bpf: Fix leakage of uninitialized bpf stack under speculation

2021-06-10T10:43:53Z

commit 801c6058d14a82179a7ee17a4b532cac6fad067f upstream. The current implemented mechanisms to mitigate data disclosure under speculation mainly address stack and map value oob access from the speculative domain. However, Piotr discovered that uninitialized BPF stack is not protected yet, and thus old data from the kernel stack, potentially including addresses of kernel structures, could still be extracted from that 512 bytes large window. The BPF stack is special compared to map values since it's not zero initialized for every program invocation, whereas map values /are/ zero initialized upon their initial allocation and thus cannot leak any prior data in either domain. In the non-speculative domain, the verifier ensures that every stack slot read must have a prior stack slot write by the BPF program to avoid such data leaking issue. However, this is not enough: for example, when the pointer arithmetic operation moves the stack pointer from the last valid stack offset to the first valid offset, the sanitation logic allows for any intermediate offsets during speculative execution, which could then be used to extract any restricted stack content via side-channel. Given for unprivileged stack pointer arithmetic the use of unknown but bounded scalars is generally forbidden, we can simply turn the register-based arithmetic operation into an immediate-based arithmetic operation without the need for masking. This also gives the benefit of reducing the needed instructions for the operation. Given after the work in 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic mask"), the aux->alu_limit already holds the final immediate value for the offset register with the known scalar. Thus, a simple mov of the immediate to AX register with using AX as the source for the original instruction is sufficient and possible now in this case. Reported-by: Piotr Krysiuk Signed-off-by: Daniel Borkmann Tested-by: Piotr Krysiuk Reviewed-by: Piotr Krysiuk Reviewed-by: John Fastabend Acked-by: Alexei Starovoitov [fllinden@amazon.com: fixed minor 4.14 conflict because of renamed function] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

net: usb: cdc_ncm: don't spew notifications

2021-06-10T10:43:49Z

[ Upstream commit de658a195ee23ca6aaffe197d1d2ea040beea0a2 ] RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler Reviewed-by: Hayes Wang Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

hugetlbfs: hugetlb_fault_mutex_hash() cleanup

2021-06-03T06:36:25Z

commit 552546366a30d88bd1d6f5efe848b2ab50fd57e5 upstream. A new clang diagnostic (-Wsizeof-array-div) warns about the calculation to determine the number of u32's in an array of unsigned longs. Suppress warning by adding parentheses. While looking at the above issue, noticed that the 'address' parameter to hugetlb_fault_mutex_hash is no longer used. So, remove it from the definition and all callers. No functional change. Link: http://lkml.kernel.org/r/20190919011847.18400-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Reported-by: Nathan Chancellor Reviewed-by: Nathan Chancellor Reviewed-by: Davidlohr Bueso Reviewed-by: Andrew Morton Cc: Nick Desaulniers Cc: Ilie Halip Cc: David Bolvansky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

netfilter: x_tables: Use correct memory barriers.

2021-06-03T06:36:11Z

commit 175e476b8cdf2a4de7432583b49c871345e4f8a1 upstream. When a new table value was assigned, it was followed by a write memory barrier. This ensured that all writes before this point would complete before any writes after this point. However, to determine whether the rules are unused, the sequence counter is read. To ensure that all writes have been done before these reads, a full memory barrier is needed, not just a write memory barrier. The same argument applies when incrementing the counter, before the rules are read. Changing to using smp_mb() instead of smp_wmb() fixes the kernel panic reported in cc00bcaa5899 (which is still present), while still maintaining the same speed of replacing tables. The smb_mb() barriers potentially slow the packet path, however testing has shown no measurable change in performance on a 4-core MIPS64 platform. Fixes: 7f5c6d4f665b ("netfilter: get rid of atomic ops in fast path") Signed-off-by: Mark Tomlinson Signed-off-by: Pablo Neira Ayuso [Ported to stable, affected barrier is added by d3d40f237480abf3268956daf18cdc56edd32834 in mainline] Signed-off-by: Pavel Machek (CIP) Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Greg Kroah-Hartman

vt: Fix character height handling with VT_RESIZEX

2021-05-26T09:47:01Z

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream. Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

smp: Fix smp_call_function_single_async prototype

2021-05-22T08:57:35Z

commit 1139aeb1c521eb4a050920ce6c64c36c4f2a3ab7 upstream. As of commit 966a967116e6 ("smp: Avoid using two cache lines for struct call_single_data"), the smp code prefers 32-byte aligned call_single_data objects for performance reasons, but the block layer includes an instance of this structure in the main 'struct request' that is more senstive to size than to performance here, see 4ccafe032005 ("block: unalign call_single_data in struct request"). The result is a violation of the calling conventions that clang correctly points out: block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch] smp_call_function_single_async(cpu, &rq->csd); It does seem that the usage of the call_single_data without cache line alignment should still be allowed by the smp code, so just change the function prototype so it accepts both, but leave the default alignment unchanged for the other users. This seems better to me than adding a local hack to shut up an otherwise correct warning in the caller. Signed-off-by: Arnd Bergmann Signed-off-by: Peter Zijlstra (Intel) Acked-by: Jens Axboe Link: https://lkml.kernel.org/r/20210505211300.3174456-1-arnd@kernel.org [nc: Fix conflicts] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

HID: plantronics: Workaround for double volume key presses

2021-05-22T08:57:31Z

[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ] Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice for each volume key press. This patch adds a quirk to hid-plantronics for this product ID, which will ignore the second volume key press if it happens within 5 ms from the last one that was handled. The patch was tested on the mentioned model only, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected, because the rate is about 3 times per second, which is far less frequent than once in 5 ms. Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls") Signed-off-by: Maxim Mikityanskiy Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

tty: fix return value for unsupported ioctls

2021-05-22T08:57:29Z

[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ] Drivers should return -ENOTTY ("Inappropriate I/O control operation") when an ioctl isn't supported, while -EINVAL is used for invalid arguments. Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned -EINVAL when a tty driver did not implement the corresponding operations. Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a corresponding Fixes tag below. Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

spi: Fix use-after-free with devm_spi_alloc_*

2021-05-22T08:57:29Z

[ Upstream commit 794aaf01444d4e765e2b067cba01cc69c1c68ed9 ] We can't rely on the contents of the devres list during spi_unregister_controller(), as the list is already torn down at the time we perform devres_find() for devm_spi_release_controller. This causes devices registered with devm_spi_alloc_{master,slave}() to be mistakenly identified as legacy, non-devm managed devices and have their reference counters decremented below 0. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174 [] (refcount_warn_saturate) from [] (kobject_put+0x90/0x98) [] (kobject_put) from [] (put_device+0x20/0x24) r4:b6700140 [] (put_device) from [] (devm_spi_release_controller+0x3c/0x40) [] (devm_spi_release_controller) from [] (release_nodes+0x84/0xc4) r5:b6700180 r4:b6700100 [] (release_nodes) from [] (devres_release_all+0x5c/0x60) r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10 [] (devres_release_all) from [] (__device_release_driver+0x144/0x1ec) r5:b117ad94 r4:b163dc10 [] (__device_release_driver) from [] (device_driver_detach+0x84/0xa0) r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10 [] (device_driver_detach) from [] (unbind_store+0xe4/0xf8) Instead, determine the devm allocation state as a flag on the controller which is guaranteed to be stable during cleanup. Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation") Signed-off-by: William A. Kennington III Link: https://lore.kernel.org/r/20210407095527.2771582-1-wak@google.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

modules: inherit TAINT_PROPRIETARY_MODULE

2021-05-22T08:57:24Z

commit 262e6ae7081df304fc625cf368d5c2cbba2bb991 upstream. If a TAINT_PROPRIETARY_MODULE exports symbol, inherit the taint flag for all modules importing these symbols, and don't allow loading symbols from TAINT_PROPRIETARY_MODULE modules if the module previously imported gplonly symbols. Add a anti-circumvention devices so people don't accidentally get themselves into trouble this way. Comment from Greg: "Ah, the proven-to-be-illegal "GPL Condom" defense :)" [jeyu: pr_info -> pr_err and pr_warn as per discussion] Link: http://lore.kernel.org/r/20200730162957.GA22469@lst.de Acked-by: Daniel Vetter Reviewed-by: Greg Kroah-Hartman Signed-off-by: Christoph Hellwig Signed-off-by: Jessica Yu Signed-off-by: Greg Kroah-Hartman