user/sven/linux.git/include/linux, branch v4.19.14

platform-msi: Free descriptors in platform_msi_domain_free()

2019-01-09T16:38:42Z

commit 81b1e6e6a8590a19257e37a1633bec098d499c57 upstream. Since the addition of platform MSI support, there were two helpers supposed to allocate/free IRQs for a device: platform_msi_domain_alloc_irqs() platform_msi_domain_free_irqs() In these helpers, IRQ descriptors are allocated in the "alloc" routine while they are freed in the "free" one. Later, two other helpers have been added to handle IRQ domains on top of MSI domains: platform_msi_domain_alloc() platform_msi_domain_free() Seen from the outside, the logic is pretty close with the former helpers and people used it with the same logic as before: a platform_msi_domain_alloc() call should be balanced with a platform_msi_domain_free() call. While this is probably what was intended to do, the platform_msi_domain_free() does not remove/free the IRQ descriptor(s) created/inserted in platform_msi_domain_alloc(). One effect of such situation is that removing a module that requested an IRQ will let one orphaned IRQ descriptor (with an allocated MSI entry) in the device descriptors list. Next time the module will be inserted back, one will observe that the allocation will happen twice in the MSI domain, one time for the remaining descriptor, one time for the new one. It also has the side effect to quickly overshoot the maximum number of allocated MSI and then prevent any module requesting an interrupt in the same domain to be inserted anymore. This situation has been met with loops of insertion/removal of the mvpp2.ko module (requesting 15 MSIs each time). Fixes: 552c494a7666 ("platform-msi: Allow creation of a MSI-based stacked irq domain") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()

2019-01-09T16:38:33Z

[ Upstream commit aff6db454599d62191aabc208930e891748e4322 ] __ptr_ring_swap_queue() tries to move pointers from the old ring to the new one, but it forgets to check if ->producer is beyond the new size at the end of the operation. This leads to an out-of-bound access in __ptr_ring_produce() as reported by syzbot. Reported-by: syzbot+8993c0fa96d57c399735@syzkaller.appspotmail.com Fixes: 5d49de532002 ("ptr_ring: resize support") Cc: "Michael S. Tsirkin" Cc: John Fastabend Cc: Jason Wang Signed-off-by: Cong Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mm: don't miss the last page because of round-off error

2018-12-29T12:37:59Z

commit 68600f623d69da428c6163275f97ca126e1a8ec5 upstream. I've noticed, that dying memory cgroups are often pinned in memory by a single pagecache page. Even under moderate memory pressure they sometimes stayed in such state for a long time. That looked strange. My investigation showed that the problem is caused by applying the LRU pressure balancing math: scan = div64_u64(scan * fraction[lru], denominator), where denominator = fraction[anon] + fraction[file] + 1. Because fraction[lru] is always less than denominator, if the initial scan size is 1, the result is always 0. This means the last page is not scanned and has no chances to be reclaimed. Fix this by rounding up the result of the division. In practice this change significantly improves the speed of dying cgroups reclaim. [guro@fb.com: prevent double calculation of DIV64_U64_ROUND_UP() arguments] Link: http://lkml.kernel.org/r/20180829213311.GA13501@castle Link: http://lkml.kernel.org/r/20180827162621.30187-3-guro@fb.com Signed-off-by: Roman Gushchin Reviewed-by: Andrew Morton Cc: Johannes Weiner Cc: Michal Hocko Cc: Tejun Heo Cc: Rik van Riel Cc: Konstantin Khlebnikov Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm: add mm_pxd_folded checks to pgtable_bytes accounting functions

2018-12-29T12:37:57Z

[ Upstream commit 6d212db11947ae5464e4717536ed9faf61c01e86 ] The common mm code calls mm_dec_nr_pmds() and mm_dec_nr_puds() in free_pgtables() if the address range spans a full pud or pmd. If mm_dec_nr_puds/mm_dec_nr_pmds are non-empty due to configuration settings they blindly subtract the size of the pmd or pud table from pgtable_bytes even if the pud or pmd page table layer is folded. Add explicit mm_[pmd|pud]_folded checks to the four pgtable_bytes accounting functions mm_inc_nr_puds, mm_inc_nr_pmds, mm_dec_nr_puds and mm_dec_nr_pmds. As the check for folded page tables can be overwritten by the architecture, this allows to keep a correct pgtable_bytes value for platforms that use a dynamic number of page table levels. Acked-by: Kirill A. Shutemov Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

scsi: t10-pi: Return correct ref tag when queue has no integrity profile

2018-12-29T12:37:55Z

commit 60a89a3ce0cce515dc663bc1b45ac89202ad6c79 upstream. Commit ddd0bc756983 ("block: move ref_tag calculation func to the block layer") moved ref tag calculation from SCSI to a library function. However, this change broke returning the correct ref tag for devices operating in DIF mode since these do not have an associated block integrity profile. This in turn caused read/write failures on PI-formatted disks attached to an mpt3sas controller. Fixes: ddd0bc756983 ("block: move ref_tag calculation func to the block layer") Cc: stable@vger.kernel.org # 4.19+ Reported-by: John Garry Tested-by: Xiang Chen Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

pstore/ram: Correctly calculate usable PRZ bytes

2018-12-17T08:24:39Z

[ Upstream commit 89d328f637b9904b6d4c9af73c8a608b8dd4d6f8 ] The actual number of bytes stored in a PRZ is smaller than the bytes requested by platform data, since there is a header on each PRZ. Additionally, if ECC is enabled, there are trailing bytes used as well. Normally this mismatch doesn't matter since PRZs are circular buffers and the leading "overflow" bytes are just thrown away. However, in the case of a compressed record, this rather badly corrupts the results. This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1". Any stored crashes would not be uncompressable (producing a pstorefs "dmesg-*.enc.z" file), and triggering errors at boot: [ 2.790759] pstore: crypto_comp_decompress failed, ret = -22! Backporting this depends on commit 70ad35db3321 ("pstore: Convert console write to use ->write_buf") Reported-by: Joel Fernandes Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore") Signed-off-by: Kees Cook Reviewed-by: Joel Fernandes (Google) Signed-off-by: Sasha Levin

fscache: Fix race in fscache_op_complete() due to split atomic_sub & read

2018-12-17T08:24:38Z

[ Upstream commit 3f2b7b9035107d6096ea438ea3d97dcf0481b6d2 ] The code in fscache_retrieval_complete is using atomic_sub followed by an atomic_read: atomic_sub(n_pages, &op->n_pages); if (atomic_read(&op->n_pages) <= 0) fscache_op_complete(&op->op, true); This causes two threads doing a decrement of n_pages to race with each other seeing the op->refcount 0 at same time - and they end up calling fscache_op_complete() in both the threads leading to an assertion failure. Fix this by using atomic_sub_return_relaxed() instead of two calls. Note that I'm using 'relaxed' rather than, say, 'release' as there aren't multiple variables that appear to need ordering across the release. The oops looks something like: FS-Cache: Assertion failed FS-Cache: 0 > 0 is false ... kernel BUG at /usr/src/linux-4.4.0/fs/fscache/operation.c:449! ... Workqueue: fscache_operation fscache_op_work_func [fscache] ... RIP: 0010:[] fscache_op_complete+0x10d/0x180 [fscache] ... Call Trace: [] cachefiles_read_copier+0x3a9/0x410 [cachefiles] [] fscache_op_work_func+0x22/0x50 [fscache] [] process_one_work+0x150/0x3f0 [] worker_thread+0x11a/0x470 [] ? __schedule+0x359/0x980 [] ? rescuer_thread+0x310/0x310 [] kthread+0xd6/0xf0 [] ? kthread_park+0x60/0x60 [] ret_from_fork+0x3f/0x70 [] ? kthread_park+0x60/0x60 This seen this in 4.4.x kernels and the same bug affects fscache in latest upstreams kernels. Fixes: 1bb4b7f98f36 ("FS-Cache: The retrieval remaining-pages counter needs to be atomic_t") Signed-off-by: Kiran Kumar Modukuri Signed-off-by: David Howells Signed-off-by: Sasha Levin

net: use skb_list_del_init() to remove from RX sublists

2018-12-17T08:24:27Z

[ Upstream commit 22f6bbb7bcfcef0b373b0502a7ff390275c575dd ] list_del() leaves the skb->next pointer poisoned, which can then lead to a crash in e.g. OVS forwarding. For example, setting up an OVS VXLAN forwarding bridge on sfc as per: ======== $ ovs-vsctl show 5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30 Bridge "br0" Port "br0" Interface "br0" type: internal Port "enp6s0f0" Interface "enp6s0f0" Port "vxlan0" Interface "vxlan0" type: vxlan options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"} ovs_version: "2.5.0" ======== (where 10.0.0.5 is an address on enp6s0f1) and sending traffic across it will lead to the following panic: ======== general protection fault: 0000 [#1] SMP PTI CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:dev_hard_start_xmit+0x38/0x200 Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95 RSP: 0018:ffff888627b437e0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000 RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8 R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000 R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000 FS: 0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0 Call Trace: __dev_queue_xmit+0x623/0x870 ? masked_flow_lookup+0xf7/0x220 [openvswitch] ? ep_poll_callback+0x101/0x310 do_execute_actions+0xaba/0xaf0 [openvswitch] ? __wake_up_common+0x8a/0x150 ? __wake_up_common_lock+0x87/0xc0 ? queue_userspace_packet+0x31c/0x5b0 [openvswitch] ovs_execute_actions+0x47/0x120 [openvswitch] ovs_dp_process_packet+0x7d/0x110 [openvswitch] ovs_vport_receive+0x6e/0xd0 [openvswitch] ? dst_alloc+0x64/0x90 ? rt_dst_alloc+0x50/0xd0 ? ip_route_input_slow+0x19a/0x9a0 ? __udp_enqueue_schedule_skb+0x198/0x1b0 ? __udp4_lib_rcv+0x856/0xa30 ? __udp4_lib_rcv+0x856/0xa30 ? cpumask_next_and+0x19/0x20 ? find_busiest_group+0x12d/0xcd0 netdev_frame_hook+0xce/0x150 [openvswitch] __netif_receive_skb_core+0x205/0xae0 __netif_receive_skb_list_core+0x11e/0x220 netif_receive_skb_list+0x203/0x460 ? __efx_rx_packet+0x335/0x5e0 [sfc] efx_poll+0x182/0x320 [sfc] net_rx_action+0x294/0x3c0 __do_softirq+0xca/0x297 irq_exit+0xa6/0xb0 do_IRQ+0x54/0xd0 common_interrupt+0xf/0xf ======== So, in all listified-receive handling, instead pull skbs off the lists with skb_list_del_init(). Fixes: 9af86f933894 ("net: core: fix use-after-free in __netif_receive_skb_list_core") Fixes: 7da517a3bc52 ("net: core: Another step of skb receive list processing") Fixes: a4ca8b7df73c ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()") Fixes: d8269e2cbf90 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()") Signed-off-by: Edward Cree Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: Offload the handling of channels to two workqueues

2018-12-13T08:16:22Z

commit 37c2578c0c40e286bc0d30bdc05290b2058cf66e upstream. vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger Cc: K. Y. Srinivasan Cc: Haiyang Zhang Signed-off-by: Dexuan Cui Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman

USB: serial: console: fix reported terminal settings

2018-12-13T08:16:15Z

commit f51ccf46217c28758b1f3b5bc0ccfc00eca658b2 upstream. The USB-serial console implementation has never reported the actual terminal settings used. Despite storing the corresponding cflags in its struct console, these were never honoured on later tty open() where the tty termios would be left initialised to the driver defaults. Unlike the serial console implementation, the USB-serial code calls subdriver open() already at console setup. While calling set_termios() and write() before open() looks like it could work for some USB-serial drivers, others definitely do not expect this, so modelling this after serial core is going to be intrusive, if at all possible. Instead, use a (renamed) tty helper to save the termios data used at console setup so that the tty termios reflects the actual terminal settings after a subsequent tty open(). Note that the calls to tty_init_termios() (tty_driver_install()) and tty_save_termios() are serialised using the disconnect mutex. This specifically fixes a regression that was triggered by a recent change adding software flow control to the pl2303 driver: a getty trying to disable flow control while leaving the baud rate unchanged would now also set the baud rate to the driver default (prior to the flow-control change this had been a noop). Fixes: 7041d9c3f01b ("USB: serial: pl2303: add support for tx xon/xoff flow control") Cc: stable # 4.18 Cc: Florian Zumbiehl Reported-by: Jarkko Nikula Tested-by: Jarkko Nikula Acked-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman