user/sven/linux.git/include/linux, branch v4.3.4

USB: add quirk for devices with broken LPM

2016-01-23T04:55:42Z

commit ad87e03213b552a5c33d5e1e7a19a73768397010 upstream. Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by: Alan Stern Reported-by: Steinar H. Gunderson Signed-off-by: Greg Kroah-Hartman

ACPI: Use correct IRQ when uninstalling ACPI interrupt handler

2016-01-23T04:55:40Z

commit 49e4b84333f338d4f183f28f1f3c1131b9fb2b5a upstream. Currently when the system is trying to uninstall the ACPI interrupt handler, it uses acpi_gbl_FADT.sci_interrupt as the IRQ number. However, the IRQ number that the ACPI interrupt handled is installed for comes from acpi_gsi_to_irq() and that is the number that should be used for the handler removal. Fix this problem by using the mapped IRQ returned from acpi_gsi_to_irq() as appropriate. Acked-by: Lv Zheng Signed-off-by: Chen Yu Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ext4, jbd2: ensure entering into panic after recording an error in superblock

2015-12-15T05:41:07Z

commit 4327ba52afd03fc4b5afa0ee1d774c9c5b0e85c5 upstream. If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the journaling will be aborted first and the error number will be recorded into JBD2 superblock and, finally, the system will enter into the panic state in "errors=panic" option. But, in the rare case, this sequence is little twisted like the below figure and it will happen that the system enters into panic state, which means the system reset in mobile environment, before completion of recording an error in the journal superblock. In this case, e2fsck cannot recognize that the filesystem failure occurred in the previous run and the corruption wouldn't be fixed. Task A Task B ext4_handle_error() -> jbd2_journal_abort() -> __journal_abort_soft() -> __jbd2_journal_abort_hard() | -> journal->j_flags |= JBD2_ABORT; | | __ext4_abort() | -> jbd2_journal_abort() | | -> __journal_abort_soft() | | -> if (journal->j_flags & JBD2_ABORT) | | return; | -> panic() | -> jbd2_journal_update_sb_errno() Tested-by: Hobin Woo Signed-off-by: Daeho Jeong Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ipv6: add complete rcu protection around np->opt

2015-12-15T05:41:04Z

[ Upstream commit 45f6fad84cc305103b28d73482b344d7f5b76f39 ] This patch addresses multiple problems : UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions while socket is not locked : Other threads can change np->opt concurrently. Dmitry posted a syzkaller (http://github.com/google/syzkaller) program desmonstrating use-after-free. Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock() and dccp_v6_request_recv_sock() also need to use RCU protection to dereference np->opt once (before calling ipv6_dup_options()) This patch adds full RCU protection to np->opt Reported-by: Dmitry Vyukov Signed-off-by: Eric Dumazet Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Added self loopback prevention

2015-12-15T05:40:58Z

[ Upstream commit 66189961e986e53ae39822898fc2ce88f44c61bb ] Prevent outgoing multicast frames from looping back to the RX queue. By introducing new HW capability self_lb_en_modifiable, which indicates the support to modify self_lb_en bit in modify_tir command. When this capability is set we can prevent TIRs from sending back loopback multicast traffic to their own RQs, by "refreshing TIRs" with modify_tir command, on every time new channels (SQs/RQs) are created at device open. This is needed since TIRs are static and only allocated once on driver load, and the loopback decision is under their responsibility. Fixes issues of the kind: "IPv6: eth2: IPv6 duplicate address fe80::e61d:2dff:fe5c:f2e9 detected!" The issue is seen since the IPv6 solicitations multicast messages are loopedback and the network stack thinks they are coming from another host. Fixes: 5c50368f3831 ("net/mlx5e: Light-weight netdev open/stop") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tty: audit: Fix audit source

2015-12-09T19:34:42Z

commit 6b2a3d628aa752f0ab825fc6d4d07b09e274d1c1 upstream. The data to audit/record is in the 'from' buffer (ie., the input read buffer). Fixes: 72586c6061ab ("n_tty: Fix auditing support for cannonical mode") Cc: Miloslav Trmač Signed-off-by: Peter Hurley Acked-by: Laura Abbott Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

KVM: Provide function for VCPU lookup by id

2015-12-09T19:34:34Z

commit db27a7a37aa0b1f8b373f8b0fb72a2ccaafb85b7 upstream. Let's provide a function to lookup a VCPU by id. Reviewed-by: Christian Borntraeger Reviewed-by: Dominik Dingel Signed-off-by: David Hildenbrand Signed-off-by: Christian Borntraeger [split patch from refactoring patch] Signed-off-by: Greg Kroah-Hartman

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-01T04:36:07Z

Pull ARM SoC fixes from Olof Johansson: "This should be our final batch of fixes for 4.3: - A patch from Sudeep Holla that fixes annotation of wakeup sources properly, old unused format seems to have spread through copying. - Two patches from Tony for OMAP. One dealing with MUSB setup problems due to runtime PM being enabled too early on the parent device. The other fixes IRQ numbering for OMAP1" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: usb: musb: omap2430: Fix regression caused by driver core change ARM: OMAP1: fix incorrect INT_DMA_LCD ARM: dts: fix gpio-keys wakeup-source property

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-10-31T18:52:20Z

Pull networking fixes from David Miller: 1) Fix two regressions in ipv6 route lookups, particularly wrt output interface specifications in the lookup key. From David Ahern. 2) Fix checks in ipv6 IPSEC tunnel pre-encap fragmentation, from Herbert Xu. 3) Fix mis-advertisement of 1000BASE-T on bcm63xx_enet, from Simon Arlott. 4) Some smsc phys misbehave with energy detect mode enabled, so add a DT property and disable it on such switches. From Heiko Schocher. 5) Fix TSO corruption on TX in mv643xx_eth, from Philipp Kirchhofer. 6) Fix regression added by removal of openvswitch vport stats, from James Morse. 7) Vendor Kconfig options should be bool, not tristate, from Andreas Schwab. 8) Use non-_BH() net stats bump in tcp_xmit_probe_skb(), otherwise we barf during TCP REPAIR operations. 9) Fix various bugs in openvswitch conntrack support, from Joe Stringer. 10) Fix NETLINK_LIST_MEMBERSHIPS locking, from David Herrmann. 11) Don't have VSOCK do sock_put() in interrupt context, from Jorgen Hansen. 12) Fix skb_realloc_headroom() failures properly in ISDN, from Karsten Keil. 13) Add some device IDs to qmi_wwan, from Bjorn Mork. 14) Fix ovs egress tunnel information when using lwtunnel devices, from Pravin B Shelar. 15) Add missing NETIF_F_FRAGLIST to macvtab feature list, from Jason Wang. 16) Fix incorrect handling of throw routes when the result of the throw cannot find a match, from Xin Long. 17) Protect ipv6 MTU calculations from wrap-around, from Hannes Frederic Sowa. 18) Fix failed autonegotiation on KSZ9031 micrel PHYs, from Nathan Sullivan. 19) Add missing memory barries in descriptor accesses or xgbe driver, from Thomas Lendacky. 20) Fix release conditon test in pppoe_release(), from Guillaume Nault. 21) Fix gianfar bugs wrt filter configuration, from Claudiu Manoil. 22) Fix violations of RX buffer alignment in sh_eth driver, from Sergei Shtylyov. 23) Fixing missing of_node_put() calls in various places around the networking, from Julia Lawall. 24) Fix incorrect leaf now walking in ipv4 routing tree, from Alexander Duyck. 25) RDS doesn't check pskb_pull()/pskb_trim() return values, from Sowmini Varadhan. 26) Fix VLAN configuration in mlx4 driver, from Jack Morgenstein. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits) ipv6: protect mtu calculation of wrap-around and infinite loop by rounding issues Revert "Merge branch 'ipv6-overflow-arith'" net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes net/mlx4_en: Explicitly set no vlan tags in WQE ctrl segment when no vlan is present vhost: fix performance on LE hosts bpf: sample: define aarch64 specific registers amd-xgbe: Fix race between access of desc and desc index RDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in rds_tcp_data_recv forcedeth: fix unilateral interrupt disabling in netpoll path openvswitch: Fix skb leak using IPv6 defrag ipv6: Export nf_ct_frag6_consume_orig() openvswitch: Fix double-free on ip_defrag() errors fib_trie: leaf_walk_rcu should not compute key if key is less than pn->key net: mv643xx_eth: add missing of_node_put ath6kl: add missing of_node_put net: phy: mdio: add missing of_node_put netdev/phy: add missing of_node_put net: netcp: add missing of_node_put net: thunderx: add missing of_node_put ipv6: gre: support SIT encapsulation ...

Revert "Merge branch 'ipv6-overflow-arith'"

2015-10-29T14:01:48Z

Linus dislikes these changes. To not hold up the net-merge let's revert it for now and fix the bug like Linus suggested. This reverts commit ec3661b42257d9a06cf0d318175623ac7a660113, reversing changes made to c80dbe04612986fd6104b4a1be21681b113b5ac9. Cc: Linus Torvalds Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller