user/sven/linux.git/include/linux, branch v4.9.197

cfg80211: Use const more consistently in for_each_element macros

2019-10-17T20:42:22Z

commit 7388afe09143210f555bdd6c75035e9acc1fab96 upstream. Enforce the first argument to be a correct type of a pointer to struct element and avoid unnecessary typecasts from const to non-const pointers (the change in validate_ie_attr() is needed to make this part work). In addition, avoid signed/unsigned comparison within for_each_element() and mark struct element packed just in case. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

cfg80211: add and use strongly typed element iteration macros

2019-10-17T20:42:21Z

commit 0f3b07f027f87a38ebe5c436490095df762819be upstream. Rather than always iterating elements from frames with pure u8 pointers, add a type "struct element" that encapsulates the id/datalen/data format of them. Then, add the element iteration macros * for_each_element * for_each_element_id * for_each_element_extid which take, as their first 'argument', such a structure and iterate through a given u8 array interpreting it as elements. While at it and since we'll need it, also add * for_each_subelement * for_each_subelement_id * for_each_subelement_extid which instead of taking data/length just take an outer element and use its data/datalen. Also add for_each_element_completed() to determine if any of the loops above completed, i.e. it was able to parse all of the elements successfully and no data remained. Use for_each_element_id() in cfg80211_find_ie_match() as the first user of this. Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

quota: fix wrong condition in is_quota_modification()

2019-10-05T10:30:36Z

commit 6565c182094f69e4ffdece337d395eb7ec760efc upstream. Quoted from commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize") " At LSF we decided that if we truncate up from isize we shouldn't trim fallocated blocks that were fallocated with KEEP_SIZE and are past the new i_size. This patch fixes ext4 to do this. " And generic/092 of fstest have covered this case for long time, however is_quota_modification() didn't adjust based on that rule, so that in below condition, we will lose to quota block change: - fallocate blocks beyond EOF - remount - truncate(file_path, file_size) Fix it. Link: https://lore.kernel.org/r/20190911093650.35329-1-yuchao0@huawei.com Fixes: 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize") CC: stable@vger.kernel.org Signed-off-by: Chao Yu Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman

kprobes: Prohibit probing on BUG() and WARN() address

2019-10-05T10:30:26Z

[ Upstream commit e336b4027775cb458dc713745e526fa1a1996b2a ] Since BUG() and WARN() may use a trap (e.g. UD2 on x86) to get the address where the BUG() has occurred, kprobes can not do single-step out-of-line that instruction. So prohibit probing on such address. Without this fix, if someone put a kprobe on WARN(), the kernel will crash with invalid opcode error instead of outputing warning message, because kernel can not find correct bug address. Signed-off-by: Masami Hiramatsu Acked-by: Steven Rostedt (VMware) Acked-by: Naveen N. Rao Cc: Anil S Keshavamurthy Cc: David S . Miller Cc: Linus Torvalds Cc: Naveen N . Rao Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/156750890133.19112.3393666300746167111.stgit@devnote2 Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin

libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer

2019-09-10T09:31:03Z

[ Upstream commit 5c498950f730aa17c5f8a2cdcb903524e4002ed2 ] Signed-off-by: Luis Henriques Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin

gpio: Fix build error of function redefinition

2019-09-10T09:31:00Z

[ Upstream commit 68e03b85474a51ec1921b4d13204782594ef7223 ] when do randbuilding, I got this error: In file included from drivers/hwmon/pmbus/ucd9000.c:19:0: ./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/hwmon/pmbus/ucd9000.c:18:0: ./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot Fixes: 964cb341882f ("gpio: move pincontrol calls to ") Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K

2019-08-25T08:51:50Z

[ Upstream commit fdadd04931c2d7cd294dc5b2b342863f94be53a3 ] Michael and Sandipan report: Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF JIT allocations. At compile time it defaults to PAGE_SIZE * 40000, and is adjusted again at init time if MODULES_VADDR is defined. For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with the compile-time default at boot-time, which is 0x9c400000 when using 64K page size. This overflows the signed 32-bit bpf_jit_limit value: root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit -1673527296 and can cause various unexpected failures throughout the network stack. In one case `strace dhclient eth0` reported: setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8}, 16) = -1 ENOTSUPP (Unknown error 524) and similar failures can be seen with tools like tcpdump. This doesn't always reproduce however, and I'm not sure why. The more consistent failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9 host would time out on systemd/netplan configuring a virtio-net NIC with no noticeable errors in the logs. Given this and also given that in near future some architectures like arm64 will have a custom area for BPF JIT image allocations we should get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For 4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec() so therefore add another overridable bpf_jit_alloc_exec_limit() helper function which returns the possible size of the memory area for deriving the default heuristic in bpf_jit_charge_init(). Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default JIT memory provider, and therefore in case archs implement their custom module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}. Additionally, for archs supporting large page sizes, we should change the sysctl to be handled as long to not run into sysctl restrictions in future. Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations") Reported-by: Sandipan Das Reported-by: Michael Roth Signed-off-by: Daniel Borkmann Tested-by: Michael Roth Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

inet: switch IP ID generator to siphash

2019-08-25T08:51:42Z

commit df453700e8d81b1bdafdf684365ee2b9431fb702 upstream. According to Amit Klein and Benny Pinkas, IP ID generation is too weak and might be used by attackers. Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix()) having 64bit key and Jenkins hash is risky. It is time to switch to siphash and its 128bit keys. Signed-off-by: Eric Dumazet Reported-by: Amit Klein Reported-by: Benny Pinkas Signed-off-by: David S. Miller [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

siphash: implement HalfSipHash1-3 for hash tables

2019-08-25T08:51:42Z

commit 1ae2324f732c9c4e2fa4ebd885fa1001b70d52e1 upstream. HalfSipHash, or hsiphash, is a shortened version of SipHash, which generates 32-bit outputs using a weaker 64-bit key. It has *much* lower security margins, and shouldn't be used for anything too sensitive, but it could be used as a hashtable key function replacement, if the output is never exposed, and if the security requirement is not too high. The goal is to make this something that performance-critical jhash users would be willing to use. On 64-bit machines, HalfSipHash1-3 is slower than SipHash1-3, so we alias SipHash1-3 to HalfSipHash1-3 on those systems. 64-bit x86_64: [ 0.509409] test_siphash: SipHash2-4 cycles: 4049181 [ 0.510650] test_siphash: SipHash1-3 cycles: 2512884 [ 0.512205] test_siphash: HalfSipHash1-3 cycles: 3429920 [ 0.512904] test_siphash: JenkinsHash cycles: 978267 So, we map hsiphash() -> SipHash1-3 32-bit x86: [ 0.509868] test_siphash: SipHash2-4 cycles: 14812892 [ 0.513601] test_siphash: SipHash1-3 cycles: 9510710 [ 0.515263] test_siphash: HalfSipHash1-3 cycles: 3856157 [ 0.515952] test_siphash: JenkinsHash cycles: 1148567 So, we map hsiphash() -> HalfSipHash1-3 hsiphash() is roughly 3 times slower than jhash(), but comes with a considerable security improvement. Signed-off-by: Jason A. Donenfeld Reviewed-by: Jean-Philippe Aumasson Signed-off-by: David S. Miller [bwh: Backported to 4.9 to avoid regression for WireGuard with only half the siphash API present] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

siphash: add cryptographically secure PRF

2019-08-25T08:51:42Z

commit 2c956a60778cbb6a27e0c7a8a52a91378c90e1d1 upstream. SipHash is a 64-bit keyed hash function that is actually a cryptographically secure PRF, like HMAC. Except SipHash is super fast, and is meant to be used as a hashtable keyed lookup function, or as a general PRF for short input use cases, such as sequence numbers or RNG chaining. For the first usage: There are a variety of attacks known as "hashtable poisoning" in which an attacker forms some data such that the hash of that data will be the same, and then preceeds to fill up all entries of a hashbucket. This is a realistic and well-known denial-of-service vector. Currently hashtables use jhash, which is fast but not secure, and some kind of rotating key scheme (or none at all, which isn't good). SipHash is meant as a replacement for jhash in these cases. There are a modicum of places in the kernel that are vulnerable to hashtable poisoning attacks, either via userspace vectors or network vectors, and there's not a reliable mechanism inside the kernel at the moment to fix it. The first step toward fixing these issues is actually getting a secure primitive into the kernel for developers to use. Then we can, bit by bit, port things over to it as deemed appropriate. While SipHash is extremely fast for a cryptographically secure function, it is likely a bit slower than the insecure jhash, and so replacements will be evaluated on a case-by-case basis based on whether or not the difference in speed is negligible and whether or not the current jhash usage poses a real security risk. For the second usage: A few places in the kernel are using MD5 or SHA1 for creating secure sequence numbers, syn cookies, port numbers, or fast random numbers. SipHash is a faster and more fitting, and more secure replacement for MD5 in those situations. Replacing MD5 and SHA1 with SipHash for these uses is obvious and straight-forward, and so is submitted along with this patch series. There shouldn't be much of a debate over its efficacy. Dozens of languages are already using this internally for their hash tables and PRFs. Some of the BSDs already use this in their kernels. SipHash is a widely known high-speed solution to a widely known set of problems, and it's time we catch-up. Signed-off-by: Jason A. Donenfeld Reviewed-by: Jean-Philippe Aumasson Cc: Linus Torvalds Cc: Eric Biggers Cc: David Laight Cc: Eric Dumazet Signed-off-by: David S. Miller [bwh: Backported to 4.9 as dependency of commits df453700e8d8 "inet: switch IP ID generator to siphash" and 3c79107631db "netfilter: ctnetlink: don't use conntrack/expect object addresses as id"] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman