user/sven/linux.git/include/linux, branch v4.9.74

mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP

2018-01-02T19:35:18Z

commit 5dd0b16cdaff9b94da06074d5888b03235c0bf17 upstream. This fixes CONFIG_SMP=n, CONFIG_DEBUG_TLBFLUSH=y without introducing further #ifdef soup. Caught by a Kbuild bot randconfig build. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: ce4a4e565f52 ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code") Link: http://lkml.kernel.org/r/76da9a3cc4415996f2ad2c905b93414add322021.1496673616.git.luto@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

timers: Reinitialize per cpu bases on hotplug

2018-01-02T19:35:17Z

commit 26456f87aca7157c057de65c9414b37f1ab881d1 upstream. The timer wheel bases are not (re)initialized on CPU hotplug. That leaves them with a potentially stale clk and next_expiry valuem, which can cause trouble then the CPU is plugged. Add a prepare callback which forwards the clock, sets next_expiry to far in the future and reset the control flags to a known state. Set base->must_forward_clk so the first timer which is queued will try to forward the clock to current jiffies. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Reported-by: Paul E. McKenney Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: Sebastian Siewior Cc: Anna-Maria Gleixner Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos Signed-off-by: Greg Kroah-Hartman

net/mlx5: Fix rate limit packet pacing naming and struct

2018-01-02T19:35:13Z

[ Upstream commit 37e92a9d4fe38dc3e7308913575983a6a088c8d4 ] In mlx5_ifc, struct size was not complete, and thus driver was sending garbage after the last defined field. Fixed it by adding reserved field to complete the struct size. In addition, rename all set_rate_limit to set_pp_rate_limit to be compliant with the Firmware <-> Driver definition. Fixes: 7486216b3a0b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: 1466cc5b23d1 ("net/mlx5: Rate limit tables support") Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

tcp: invalidate rate samples during SACK reneging

2018-01-02T19:35:13Z

[ Upstream commit d4761754b4fb2ef8d9a1e9d121c4bec84e1fe292 ] Mark tcp_sock during a SACK reneging event and invalidate rate samples while marked. Such rate samples may overestimate bw by including packets that were SACKed before reneging. < ack 6001 win 10000 sack 7001:38001 < ack 7001 win 0 sack 8001:38001 // Reneg detected > seq 7001:8001 // RTO, SACK cleared. < ack 38001 win 10000 In above example the rate sample taken after the last ack will count 7001-38001 as delivered while the actual delivery rate likely could be much lower i.e. 7001-8001. This patch adds a new field tcp_sock.sack_reneg and marks it when we declare SACK reneging and entering TCP_CA_Loss, and unmarks it after the last rate sample was taken before moving back to TCP_CA_Open. This patch also invalidates rate samples taken while tcp_sock.is_sack_reneg is set. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Yousuk Seung Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Acked-by: Soheil Hassas Yeganeh Acked-by: Eric Dumazet Acked-by: Priyaranjan Jha Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ptr_ring: add barriers

2018-01-02T19:35:11Z

[ Upstream commit a8ceb5dbfde1092b466936bca0ff3be127ecf38e ] Users of ptr_ring expect that it's safe to give the data structure a pointer and have it be available to consumers, but that actually requires an smb_wmb or a stronger barrier. In absence of such barriers and on architectures that reorder writes, consumer might read an un=initialized value from an skb pointer stored in the skb array. This was observed causing crashes. To fix, add memory barriers. The barrier we use is a wmb, the assumption being that producers do not need to read the value so we do not need to order these reads. Reported-by: George Cherian Suggested-by: Jason Wang Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: reevalulate autoflowlabel setting after sysctl setting

2018-01-02T19:35:11Z

[ Upstream commit 513674b5a2c9c7a67501506419da5c3c77ac6f08 ] sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901f7c4 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau Cc: Eric Dumazet Cc: Tom Herbert Signed-off-by: Shaohua Li Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bpf: fix branch pruning logic

2017-12-25T13:23:47Z

From: Alexei Starovoitov [ Upstream commit c131187db2d3fa2f8bf32fdf4e9a4ef805168467 ] when the verifier detects that register contains a runtime constant and it's compared with another constant it will prune exploration of the branch that is guaranteed not to be taken at runtime. This is all correct, but malicious program may be constructed in such a way that it always has a constant comparison and the other branch is never taken under any conditions. In this case such path through the program will not be explored by the verifier. It won't be taken at run-time either, but since all instructions are JITed the malicious program may cause JITs to complain about using reserved fields, etc. To fix the issue we have to track the instructions explored by the verifier and sanitize instructions that are dead at run time with NOPs. We cannot reject such dead code, since llvm generates it for valid C code, since it doesn't do as much data flow analysis as the verifier does. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman

vsock: track pkt owner vsock

2017-12-25T13:23:37Z

[ Upstream commit 36d277bac8080202684e67162ebb157f16631581 ] So that we can cancel a queued pkt later if necessary. Signed-off-by: Peng Tao Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mm: Handle 0 flags in _calc_vm_trans() macro

2017-12-20T09:07:29Z

[ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ] _calc_vm_trans() does not handle the situation when some of the passed flags are 0 (which can happen if these VM flags do not make sense for the architecture). Improve the _calc_vm_trans() macro to return 0 in such situation. Since all passed flags are constant, this does not add any runtime overhead. Signed-off-by: Jan Kara Signed-off-by: Dan Williams Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"

2017-12-20T09:07:26Z

[ Upstream commit c962cff17dfa11f4a8227ac16de2b28aea3312e4 ] Revert: dc6db24d2476 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting") The mapping of "cpuid <-> nodeid" is established at boot time via ACPI tables to keep associations of workqueues and other node related items consistent across cpu hotplug. But, ACPI tables are unreliable and failures with that boot time mapping have been reported on machines where the ACPI table and the physical information which is retrieved at actual hotplug is inconsistent. Revert the mapping implementation so it can be replaced with a less error prone approach. Signed-off-by: Dou Liyang Tested-by: Xiaolong Ye Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-2-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman