user/sven/linux.git/include/linux, branch v5.10.124

Revert "PCI: Make pci_enable_ptm() private"

2022-06-22T12:13:20Z

commit 1d71eb53e45187f58089d32b51e27784c791d90e upstream. Make pci_enable_ptm() accessible from the drivers. Exposing this to the driver enables the driver to use the 'ptm_enabled' field of 'pci_dev' to check if PTM is enabled or not. This reverts commit ac6c26da29c1 ("PCI: Make pci_enable_ptm() private"). Signed-off-by: Vinicius Costa Gomes Acked-by: Bjorn Helgaas Signed-off-by: Tony Nguyen Signed-off-by: Meng Tang Signed-off-by: Greg Kroah-Hartman

x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data

2022-06-16T11:27:59Z

commit 8d50cdf8b8341770bc6367bce40c0c1bb0e1d5b3 upstream Add the sysfs reporting file for Processor MMIO Stale Data vulnerability. It exposes the vulnerability and mitigation state similar to the existing files for the other hardware vulnerabilities. Signed-off-by: Pawan Gupta Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

nodemask: Fix return values to be unsigned

2022-06-14T16:32:45Z

[ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ] The nodemask routines had mixed return values that provided potentially signed return values that could never happen. This was leading to the compiler getting confusing about the range of possible return values (it was thinking things could be negative where they could not be). Fix all the nodemask routines that should be returning unsigned (or bool) values. Silences: mm/swapfile.c: In function ‘setup_swap_info’: mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds] 2291 | p->avail_lists[i].prio = 1; | ~~~~~~~~~~~~~~^~~ In file included from mm/swapfile.c:16: ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’ 292 | struct plist_node avail_lists[]; /* | ^~~~~~~~~~~ Reported-by: Christophe de Dinechin Link: https://lore.kernel.org/lkml/20220414150855.2407137-3-dinechin@redhat.com/ Cc: Alexey Dobriyan Cc: Yury Norov Cc: Andy Shevchenko Cc: Rasmus Villemoes Cc: Andrew Morton Cc: Zhen Lei Signed-off-by: Kees Cook Signed-off-by: Yury Norov Signed-off-by: Sasha Levin

jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds

2022-06-14T16:32:44Z

[ Upstream commit 656d054e0a15ec327bd82801ccd58201e59f6896 ] When building x86_64 with JUMP_LABEL=n it's possible for instrumentation to sneak into noinstr: vmlinux.o: warning: objtool: exit_to_user_mode+0x14: call to static_key_count.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_exit_to_user_mode+0x2d: call to static_key_count.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_exit_to_user_mode+0x1b: call to static_key_count.constprop.0() leaves .noinstr.text section Switch to arch_ prefixed atomic to avoid the explicit instrumentation. Reported-by: kernel test robot Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Sasha Levin

iio: st_sensors: Add a local lock for protecting odr

2022-06-14T16:32:41Z

[ Upstream commit 474010127e2505fc463236470908e1ff5ddb3578 ] Right now the (framework) mlock lock is (ab)used for multiple purposes: 1- protecting concurrent accesses over the odr local cache 2- avoid changing samplig frequency whilst buffer is running Let's start by handling situation #1 with a local lock. Suggested-by: Jonathan Cameron Cc: Denis Ciocca Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

net/mlx5: correct ECE offset in query qp output

2022-06-14T16:32:36Z

[ Upstream commit 3fc2a9e89b3508a5cc0c324f26d7b4740ba8c456 ] ECE field should be after opt_param_mask in query qp output. Fixes: 6b646a7e4af6 ("net/mlx5: Add ability to read and write ECE options") Signed-off-by: Changcheng Liu Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

nodemask.h: fix compilation error with GCC12

2022-06-09T08:21:27Z

commit 37462a920392cb86541650a6f4121155f11f1199 upstream. With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with defconfig results in the following compilation error: | CC mm/swapfile.o | mm/swapfile.c: In function `setup_swap_info': | mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds | of `struct plist_node[]' [-Werror=array-bounds] | 2291 | p->avail_lists[i].prio = 1; | | ~~~~~~~~~~~~~~^~~ | In file included from mm/swapfile.c:16: | ./include/linux/swap.h:292:27: note: while referencing `avail_lists' | 292 | struct plist_node avail_lists[]; /* | | ^~~~~~~~~~~ This is due to the compiler detecting that the mask in node_states[__state] could theoretically be zero, which would lead to first_node() returning -1 through find_first_bit. I believe that the warning/error is legitimate. I first tried adding a test to check that the node mask is not emtpy, since a similar test exists in the case where MAX_NUMNODES == 1. However, adding the if statement causes other warnings to appear in for_each_cpu_node_but, because it introduces a dangling else ambiguity. And unfortunately, GCC is not smart enough to detect that the added test makes the case where (node) == -1 impossible, so it still complains with the same message. This is why I settled on replacing that with a harmless, but relatively useless (node) >= 0 test. Based on the warning for the dangling else, I also decided to fix the case where MAX_NUMNODES == 1 by moving the condition inside the for loop. It will still only be tested once. This ensures that the meaning of an else following for_each_node_mask or derivatives would not silently have a different meaning depending on the configuration. Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com Signed-off-by: Christophe de Dinechin Signed-off-by: Christophe de Dinechin Reviewed-by: Andrew Morton Cc: Ben Segall Cc: "Michael S. Tsirkin" Cc: Steven Rostedt Cc: Ingo Molnar Cc: Mel Gorman Cc: Dietmar Eggemann Cc: Vincent Guittot Cc: Paolo Bonzini Cc: Daniel Bristot de Oliveira Cc: Jason Wang Cc: Zhen Lei Cc: Juri Lelli Cc: Peter Zijlstra Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]

2022-06-09T08:21:26Z

commit 3e35142ef99fe6b4fe5d834ad43ee13cca10a2dc upstream. Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols") [1], binutils (v2.36+) started dropping section symbols that it thought were unused. This isn't an issue in general, but with kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a separate .text.unlikely section and the section symbol ".text.unlikely" is being dropped. Due to this, recordmcount is unable to find a non-weak symbol in .text.unlikely to generate a relocation record against. Address this by dropping the weak attribute from these functions. Instead, follow the existing pattern of having architectures #define the name of the function they want to override in their headers. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1 [akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h] Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Michael Ellerman Signed-off-by: Naveen N. Rao Cc: "Eric W. Biederman" Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N

2022-06-09T08:21:25Z

commit 0a8e98305f63deaf0a799d5cf5532cc83af035d1 upstream. Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") buffered writes fail on S29GL064N. This is because, on S29GL064N, reads return 0xFF at the end of DQ polling for write completion, where as, chip_good() check expects actual data written to the last location to be returned post DQ polling completion. Fix is to revert to using chip_good() for S29GL064N which only checks for DQ lines to settle down to determine write completion. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Cc: stable@vger.kernel.org Signed-off-by: Tokunori Ikegami Acked-by: Vignesh Raghavendra Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com Signed-off-by: Greg Kroah-Hartman

mailbox: forward the hrtimer if not queued and under a lock

2022-06-09T08:21:18Z

[ Upstream commit bca1a1004615efe141fd78f360ecc48c60bc4ad5 ] This reverts commit c7dacf5b0f32957b24ef29df1207dc2cd8307743, "mailbox: avoid timer start from callback" The previous commit was reverted since it lead to a race that caused the hrtimer to not be started at all. The check for hrtimer_active() in msg_submit() will return true if the callback function txdone_hrtimer() is currently running. This function could return HRTIMER_NORESTART and then the timer will not be restarted, and also msg_submit() will not start the timer. This will lead to a message actually being submitted but no timer will start to check for its compleation. The original fix that added checking hrtimer_active() was added to avoid a warning with hrtimer_forward. Looking in the kernel another solution to avoid this warning is to check hrtimer_is_queued() before calling hrtimer_forward_now() instead. This however requires a lock so the timer is not started by msg_submit() inbetween this check and the hrtimer_forward() call. Fixes: c7dacf5b0f32 ("mailbox: avoid timer start from callback") Signed-off-by: Björn Ardö Signed-off-by: Jassi Brar Signed-off-by: Sasha Levin