user/sven/linux.git/include/linux, branch v5.13.13

kfence: fix is_kfence_address() for addresses below KFENCE_POOL_SIZE

2021-08-26T12:35:19Z

[ Upstream commit a7cb5d23eaea148f8582229846f8dfff192f05c3 ] Originally the addr != NULL check was meant to take care of the case where __kfence_pool == NULL (KFENCE is disabled). However, this does not work for addresses where addr > 0 && addr < KFENCE_POOL_SIZE. This can be the case on NULL-deref where addr > 0 && addr < PAGE_SIZE or any other faulting access with addr < KFENCE_POOL_SIZE. While the kernel would likely crash, the stack traces and report might be confusing due to double faults upon KFENCE's attempt to unprotect such an address. Fix it by just checking that __kfence_pool != NULL instead. Link: https://lkml.kernel.org/r/20210818130300.2482437-1-elver@google.com Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure") Signed-off-by: Marco Elver Reported-by: Kuan-Ying Lee Acked-by: Alexander Potapenko Cc: Dmitry Vyukov Cc: [5.12+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim

2021-08-26T12:35:18Z

[ Upstream commit f56ce412a59d7d938b81de8878faef128812482c ] We've noticed occasional OOM killing when memory.low settings are in effect for cgroups. This is unexpected and undesirable as memory.low is supposed to express non-OOMing memory priorities between cgroups. The reason for this is proportional memory.low reclaim. When cgroups are below their memory.low threshold, reclaim passes them over in the first round, and then retries if it couldn't find pages anywhere else. But when cgroups are slightly above their memory.low setting, page scan force is scaled down and diminished in proportion to the overage, to the point where it can cause reclaim to fail as well - only in that case we currently don't retry, and instead trigger OOM. To fix this, hook proportional reclaim into the same retry logic we have in place for when cgroups are skipped entirely. This way if reclaim fails and some cgroups were scanned with diminished pressure, we'll try another full-force cycle before giving up and OOMing. [akpm@linux-foundation.org: coding-style fixes] Link: https://lkml.kernel.org/r/20210817180506.220056-1-hannes@cmpxchg.org Fixes: 9783aa9917f8 ("mm, memcg: proportional memory.{low,min} reclaim") Signed-off-by: Johannes Weiner Reported-by: Leon Yang Reviewed-by: Rik van Riel Reviewed-by: Shakeel Butt Acked-by: Roman Gushchin Acked-by: Chris Down Acked-by: Michal Hocko Cc: [5.4+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

vdpa/mlx5: Fix queue type selection logic

2021-08-26T12:35:05Z

[ Upstream commit 879753c816dbbdb2a9a395aa4448d29feee92d1a ] get_queue_type() comments that splict virtqueue is preferred, however, the actual logic preferred packed virtqueues. Since firmware has not supported packed virtqueues we ended up using split virtqueues as was desired. Since we do not advertise support for packed virtqueues, we add a check to verify split virtqueues are indeed supported. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen Link: https://lore.kernel.org/r/20210811053759.66752-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

virtio: Protect vqs list access

2021-08-26T12:35:04Z

[ Upstream commit 0e566c8f0f2e8325e35f6f97e13cde5356b41814 ] VQs may be accessed to mark the device broken while they are created/destroyed. Hence protect the access to the vqs list. Fixes: e2dcdfe95c0b ("virtio: virtio_break_device() to mark all virtqueues broken.") Signed-off-by: Parav Pandit Link: https://lore.kernel.org/r/20210721142648.1525924-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

PCI/MSI: Protect msi_desc::masked for multi-MSI

2021-08-18T07:07:06Z

commit 77e89afc25f30abd56e76a809ee2884d7c1b63ce upstream. Multi-MSI uses a single MSI descriptor and there is a single mask register when the device supports per vector masking. To avoid reading back the mask register the value is cached in the MSI descriptor and updates are done by clearing and setting bits in the cache and writing it to the device. But nothing protects msi_desc::masked and the mask register from being modified concurrently on two different CPUs for two different Linux interrupts which belong to the same multi-MSI descriptor. Add a lock to struct device and protect any operation on the mask and the mask register with it. This makes the update of msi_desc::masked unconditional, but there is no place which requires a modification of the hardware register without updating the masked cache. msi_mask_irq() is now an empty wrapper which will be cleaned up in follow up changes. The problem goes way back to the initial support of multi-MSI, but picking the commit which introduced the mask cache is a valid cut off point (2.6.30). Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code") Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Reviewed-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.726833414@linutronix.de Signed-off-by: Greg Kroah-Hartman

genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP

2021-08-18T07:07:03Z

commit 826da771291fc25a428e871f9e7fb465e390f852 upstream. X86 IO/APIC and MSI interrupts (when used without interrupts remapping) require that the affinity setup on startup is done before the interrupt is enabled for the first time as the non-remapped operation mode cannot safely migrate enabled interrupts from arbitrary contexts. Provide a new irq chip flag which allows affected hardware to request this. This has to be opt-in because there have been reports in the past that some interrupt chips cannot handle affinity setting before startup. Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)") Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Reviewed-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.779791738@linutronix.de Signed-off-by: Greg Kroah-Hartman

net: igmp: increase size of mr_ifc_count

2021-08-18T07:07:02Z

[ Upstream commit b69dd5b3780a7298bd893816a09da751bc0636f7 ] Some arches support cmpxchg() on 4-byte and 8-byte only. Increase mr_ifc_count width to 32bit to fix this problem. Fixes: 4a2b285e7e10 ("net: igmp: fix data-race in igmp_ifc_timer_expire()") Signed-off-by: Eric Dumazet Reported-by: Guenter Roeck Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bpf: Fix potentially incorrect results with bpf_get_local_storage()

2021-08-18T07:06:59Z

[ Upstream commit a2baf4e8bb0f306fbed7b5e6197c02896a638ab5 ] Commit b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper") fixed a bug for bpf_get_local_storage() helper so different tasks won't mess up with each other's percpu local storage. The percpu data contains 8 slots so it can hold up to 8 contexts (same or different tasks), for 8 different program runs, at the same time. This in general is sufficient. But our internal testing showed the following warning multiple times: [...] warning: WARNING: CPU: 13 PID: 41661 at include/linux/bpf-cgroup.h:193 __cgroup_bpf_run_filter_sock_ops+0x13e/0x180 RIP: 0010:__cgroup_bpf_run_filter_sock_ops+0x13e/0x180 tcp_call_bpf.constprop.99+0x93/0xc0 tcp_conn_request+0x41e/0xa50 ? tcp_rcv_state_process+0x203/0xe00 tcp_rcv_state_process+0x203/0xe00 ? sk_filter_trim_cap+0xbc/0x210 ? tcp_v6_inbound_md5_hash.constprop.41+0x44/0x160 tcp_v6_do_rcv+0x181/0x3e0 tcp_v6_rcv+0xc65/0xcb0 ip6_protocol_deliver_rcu+0xbd/0x450 ip6_input_finish+0x11/0x20 ip6_input+0xb5/0xc0 ip6_sublist_rcv_finish+0x37/0x50 ip6_sublist_rcv+0x1dc/0x270 ipv6_list_rcv+0x113/0x140 __netif_receive_skb_list_core+0x1a0/0x210 netif_receive_skb_list_internal+0x186/0x2a0 gro_normal_list.part.170+0x19/0x40 napi_complete_done+0x65/0x150 mlx5e_napi_poll+0x1ae/0x680 __napi_poll+0x25/0x120 net_rx_action+0x11e/0x280 __do_softirq+0xbb/0x271 irq_exit_rcu+0x97/0xa0 common_interrupt+0x7f/0xa0 asm_common_interrupt+0x1e/0x40 RIP: 0010:bpf_prog_1835a9241238291a_tw_egress+0x5/0xbac ? __cgroup_bpf_run_filter_skb+0x378/0x4e0 ? do_softirq+0x34/0x70 ? ip6_finish_output2+0x266/0x590 ? ip6_finish_output+0x66/0xa0 ? ip6_output+0x6c/0x130 ? ip6_xmit+0x279/0x550 ? ip6_dst_check+0x61/0xd0 [...] Using drgn [0] to dump the percpu buffer contents showed that on this CPU slot 0 is still available, but slots 1-7 are occupied and those tasks in slots 1-7 mostly don't exist any more. So we might have issues in bpf_cgroup_storage_unset(). Further debugging confirmed that there is a bug in bpf_cgroup_storage_unset(). Currently, it tries to unset "current" slot with searching from the start. So the following sequence is possible: 1. A task is running and claims slot 0 2. Running BPF program is done, and it checked slot 0 has the "task" and ready to reset it to NULL (not yet). 3. An interrupt happens, another BPF program runs and it claims slot 1 with the *same* task. 4. The unset() in interrupt context releases slot 0 since it matches "task". 5. Interrupt is done, the task in process context reset slot 0. At the end, slot 1 is not reset and the same process can continue to occupy slots 2-7 and finally, when the above step 1-5 is repeated again, step 3 BPF program won't be able to claim an empty slot and a warning will be issued. To fix the issue, for unset() function, we should traverse from the last slot to the first. This way, the above issue can be avoided. The same reverse traversal should also be done in bpf_get_local_storage() helper itself. Otherwise, incorrect local storage may be returned to BPF program. [0] https://github.com/osandov/drgn Fixes: b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper") Signed-off-by: Yonghong Song Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20210810010413.1976277-1-yhs@fb.com Signed-off-by: Sasha Levin

net/mlx5: Synchronize correct IRQ when destroying CQ

2021-08-18T07:06:58Z

[ Upstream commit 563476ae0c5e48a028cbfa38fa9d2fc0418eb88f ] The CQ destroy is performed based on the IRQ number that is stored in cq->irqn. That number wasn't set explicitly during CQ creation and as expected some of the API users of mlx5_core_create_cq() forgot to update it. This caused to wrong synchronization call of the wrong IRQ with a number 0 instead of the real one. As a fix, set the IRQ number directly in the mlx5_core_create_cq() and update all users accordingly. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Fixes: ef1659ade359 ("IB/mlx5: Add DEVX support for CQ events") Signed-off-by: Shay Drory Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

bpf: Add lockdown check for probe_write_user helper

2021-08-15T12:01:56Z

commit 51e1bb9eeaf7868db56e58f47848e364ab4c4129 upstream. Back then, commit 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers") added the bpf_probe_write_user() helper in order to allow to override user space memory. Its original goal was to have a facility to "debug, divert, and manipulate execution of semi-cooperative processes" under CAP_SYS_ADMIN. Write to kernel was explicitly disallowed since it would otherwise tamper with its integrity. One use case was shown in cf9b1199de27 ("samples/bpf: Add test/example of using bpf_probe_write_user bpf helper") where the program DNATs traffic at the time of connect(2) syscall, meaning, it rewrites the arguments to a syscall while they're still in userspace, and before the syscall has a chance to copy the argument into kernel space. These days we have better mechanisms in BPF for achieving the same (e.g. for load-balancers), but without having to write to userspace memory. Of course the bpf_probe_write_user() helper can also be used to abuse many other things for both good or bad purpose. Outside of BPF, there is a similar mechanism for ptrace(2) such as PTRACE_PEEK{TEXT,DATA} and PTRACE_POKE{TEXT,DATA}, but would likely require some more effort. Commit 96ae52279594 explicitly dedicated the helper for experimentation purpose only. Thus, move the helper's availability behind a newly added LOCKDOWN_BPF_WRITE_USER lockdown knob so that the helper is disabled under the "integrity" mode. More fine-grained control can be implemented also from LSM side with this change. Fixes: 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers") Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Signed-off-by: Greg Kroah-Hartman