user/sven/linux.git/include/linux, branch v5.16.13

sched: Fix yet more sched_fork() races

2022-03-08T18:14:13Z

commit b1e8206582f9d680cff7d04828708c8b6ab32957 upstream. Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") fixed a fork race vs cgroup, it opened up a race vs syscalls by not placing the task on the runqueue before it gets exposed through the pidhash. Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is trying to fix a single instance of this, instead fix the whole class of issues, effectively reverting this commit. Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") Reported-by: Linus Torvalds Signed-off-by: Peter Zijlstra (Intel) Tested-by: Tadeusz Struk Tested-by: Zhang Qiao Tested-by: Dietmar Eggemann Link: https://lkml.kernel.org/r/YgoeCbwj5mbCR0qA@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman

ext4: fast commit may not fallback for ineligible commit

2022-03-08T18:14:05Z

[ Upstream commit e85c81ba8859a4c839bcd69c5d83b32954133a5b ] For the follow scenario: 1. jbd start commit transaction n 2. task A get new handle for transaction n+1 3. task A do some ineligible actions and mark FC_INELIGIBLE 4. jbd complete transaction n and clean FC_INELIGIBLE 5. task A call fsync In this case fast commit will not fallback to full commit and transaction n+1 also not handled by jbd. Make ext4_fc_mark_ineligible() also record transaction tid for latest ineligible case, when call ext4_fc_cleanup() check current transaction tid, if small than latest ineligible tid do not clear the EXT4_MF_FC_INELIGIBLE. Reported-by: kernel test robot Reported-by: Dan Carpenter Reported-by: Ritesh Harjani Suggested-by: Harshad Shirwadkar Signed-off-by: Xin Yin Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Sasha Levin

nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property

2022-03-02T10:51:16Z

commit f6c052afe6f802d87c74153b7a57c43b2e9faf07 upstream. Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. It would be possible to set config->wp_gpio at MTD level before calling nvmem_register function but NVMEM framework will toggle this GPIO on each write when this GPIO should only be controlled at NAND level driver to ensure that the Write Protect has not been enabled. A way to fix this conflict is to add a new boolean flag in nvmem_config named ignore_wp. In case ignore_wp is set, the GPIO resource will be managed by the provider. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: stable@vger.kernel.org Signed-off-by: Christophe Kerello Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220220151432.16605-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

net: use sk_is_tcp() in more places

2022-03-02T10:51:10Z

[ Upstream commit 42f67eea3ba36cef2dce2e853de6ddcb2e89eb39 ] Move sk_is_tcp() to include/net/sock.h and use it where we can. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bpf: Fix a bpf_timer initialization issue

2022-03-02T10:51:00Z

commit 5eaed6eedbe9612f642ad2b880f961d1c6c8ec2b upstream. The patch in [1] intends to fix a bpf_timer related issue, but the fix caused existing 'timer' selftest to fail with hang or some random errors. After some debug, I found an issue with check_and_init_map_value() in the hashtab.c. More specifically, in hashtab.c, we have code l_new = bpf_map_kmalloc_node(&htab->map, ...) check_and_init_map_value(&htab->map, l_new...) Note that bpf_map_kmalloc_node() does not do initialization so l_new contains random value. The function check_and_init_map_value() intends to zero the bpf_spin_lock and bpf_timer if they exist in the map. But I found bpf_spin_lock is zero'ed but bpf_timer is not zero'ed. With [1], later copy_map_value() skips copying of bpf_spin_lock and bpf_timer. The non-zero bpf_timer caused random failures for 'timer' selftest. Without [1], for both bpf_spin_lock and bpf_timer case, bpf_timer will be zero'ed, so 'timer' self test is okay. For check_and_init_map_value(), why bpf_spin_lock is zero'ed properly while bpf_timer not. In bpf uapi header, we have struct bpf_spin_lock { __u32 val; }; struct bpf_timer { __u64 :64; __u64 :64; } __attribute__((aligned(8))); The initialization code: *(struct bpf_spin_lock *)(dst + map->spin_lock_off) = (struct bpf_spin_lock){}; *(struct bpf_timer *)(dst + map->timer_off) = (struct bpf_timer){}; It appears the compiler has no obligation to initialize anonymous fields. For example, let us use clang with bpf target as below: $ cat t.c struct bpf_timer { unsigned long long :64; }; struct bpf_timer2 { unsigned long long a; }; void test(struct bpf_timer *t) { *t = (struct bpf_timer){}; } void test2(struct bpf_timer2 *t) { *t = (struct bpf_timer2){}; } $ clang -target bpf -O2 -c -g t.c $ llvm-objdump -d t.o ... 0000000000000000 : 0: 95 00 00 00 00 00 00 00 exit 0000000000000008 : 1: b7 02 00 00 00 00 00 00 r2 = 0 2: 7b 21 00 00 00 00 00 00 *(u64 *)(r1 + 0) = r2 3: 95 00 00 00 00 00 00 00 exit gcc11.2 does not have the above issue. But from INTERNATIONAL STANDARD ©ISO/IEC ISO/IEC 9899:201x Programming languages — C http://www.open-std.org/Jtc1/sc22/wg14/www/docs/n1547.pdf page 157: Except where explicitly stated otherwise, for the purposes of this subclause unnamed members of objects of structure and union type do not participate in initialization. Unnamed members of structure objects have indeterminate value even after initialization. To fix the problem, let use memset for bpf_timer case in check_and_init_map_value(). For consistency, memset is also used for bpf_spin_lock case. [1] https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com/ Fixes: 68134668c17f3 ("bpf: Add map side support for bpf timers.") Signed-off-by: Yonghong Song Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220211194953.3142152-1-yhs@fb.com Signed-off-by: Greg Kroah-Hartman

bpf: Fix crash due to incorrect copy_map_value

2022-03-02T10:50:59Z

commit a8abb0c3dc1e28454851a00f8b7333d9695d566c upstream. When both bpf_spin_lock and bpf_timer are present in a BPF map value, copy_map_value needs to skirt both objects when copying a value into and out of the map. However, the current code does not set both s_off and t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock is placed in map value with bpf_timer, as bpf_map_update_elem call will be able to overwrite the other timer object. When the issue is not fixed, an overwriting can produce the following splat: [root@(none) bpf]# ./test_progs -t timer_crash [ 15.930339] bpf_testmod: loading out-of-tree module taints kernel. [ 16.037849] ================================================================== [ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325 [ 16.039399] [ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278 [ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014 [ 16.040485] Call Trace: [ 16.040645] [ 16.040805] dump_stack_lvl+0x59/0x73 [ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.041427] kasan_report.cold+0x116/0x11b [ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042328] ? memcpy+0x39/0x60 [ 16.042552] ? pv_hash+0xd0/0xd0 [ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0 [ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0 [ 16.043366] ? bpf_get_current_comm+0x50/0x50 [ 16.043608] ? jhash+0x11a/0x270 [ 16.043848] bpf_timer_cancel+0x34/0xe0 [ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81 [ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000 [ 16.044836] __x64_sys_nanosleep+0x5/0x140 [ 16.045119] do_syscall_64+0x59/0x80 [ 16.045377] ? lock_is_held_type+0xe4/0x140 [ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40 [ 16.046001] ? mark_held_locks+0x24/0x90 [ 16.046287] ? asm_exc_page_fault+0x1e/0x30 [ 16.046569] ? asm_exc_page_fault+0x8/0x30 [ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100 [ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.047405] RIP: 0033:0x7f9e4831718d [ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023 [ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d [ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0 [ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0 [ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30 [ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 16.051608] [ 16.051762] ================================================================== Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.") Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com Signed-off-by: Greg Kroah-Hartman

slab: remove __alloc_size attribute from __kmalloc_track_caller

2022-03-02T10:50:49Z

commit 93dd04ab0b2b32ae6e70284afc764c577156658e upstream. Commit c37495d6254c ("slab: add __alloc_size attributes for better bounds checking") added __alloc_size attributes to a bunch of kmalloc function prototypes. Unfortunately the change to __kmalloc_track_caller seems to cause clang to generate broken code and the first time this is called when booting, the box will crash. While the compiler problems are being reworked and attempted to be solved [1], let's just drop the attribute to solve the issue now. Once it is resolved it can be added back. [1] https://github.com/ClangBuiltLinux/linux/issues/1599 Fixes: c37495d6254c ("slab: add __alloc_size attributes for better bounds checking") Cc: stable Cc: Kees Cook Cc: Daniel Micay Cc: Nick Desaulniers Cc: Christoph Lameter Cc: Pekka Enberg Cc: Joonsoo Kim Cc: Andrew Morton Cc: Vlastimil Babka Cc: Nathan Chancellor Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Cc: llvm@lists.linux.dev Acked-by: Nick Desaulniers Acked-by: David Rientjes Acked-by: Kees Cook Signed-off-by: Vlastimil Babka Link: https://lore.kernel.org/r/20220218131358.3032912-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm

2022-02-23T11:06:06Z

[ Upstream commit bfb1a7c91fb7758273b4a8d735313d9cc388b502 ] In __WARN_FLAGS(), we had two asm statements (abbreviated): asm volatile("ud2"); asm volatile(".pushsection .discard.reachable"); These pair of statements are used to trigger an exception, but then help objtool understand that for warnings, control flow will be restored immediately afterwards. The problem is that volatile is not a compiler barrier. GCC explicitly documents this: > Note that the compiler can move even volatile asm instructions > relative to other code, including across jump instructions. Also, no clobbers are specified to prevent instructions from subsequent statements from being scheduled by compiler before the second asm statement. This can lead to instructions from subsequent statements being emitted by the compiler before the second asm statement. Providing a scheduling model such as via -march= options enables the compiler to better schedule instructions with known latencies to hide latencies from data hazards compared to inline asm statements in which latencies are not estimated. If an instruction gets scheduled by the compiler between the two asm statements, then objtool will think that it is not reachable, producing a warning. To prevent instructions from being scheduled in between the two asm statements, merge them. Also remove an unnecessary unreachable() asm annotation from BUG() in favor of __builtin_unreachable(). objtool is able to track that the ud2 from BUG() terminates control flow within the function. Link: https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile Link: https://github.com/ClangBuiltLinux/linux/issues/1483 Signed-off-by: Nick Desaulniers Signed-off-by: Josh Poimboeuf Link: https://lore.kernel.org/r/20220202205557.2260694-1-ndesaulniers@google.com Signed-off-by: Sasha Levin

block: fix surprise removal for drivers calling blk_set_queue_dying

2022-02-23T11:06:02Z

commit 7a5428dcb7902700b830e912feee4e845df7c019 upstream. Various block drivers call blk_set_queue_dying to mark a disk as dead due to surprise removal events, but since commit 8e141f9eb803 that doesn't work given that the GD_DEAD flag needs to be set to stop I/O. Replace the driver calls to blk_set_queue_dying with a new (and properly documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the only remaining caller. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

net_sched: add __rcu annotation to netdev->qdisc

2022-02-23T11:05:57Z

commit 5891cd5ec46c2c2eb6427cb54d214b149635dd0e upstream. syzbot found a data-race [1] which lead me to add __rcu annotations to netdev->qdisc, and proper accessors to get LOCKDEP support. [1] BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1: attach_default_qdiscs net/sched/sch_generic.c:1167 [inline] dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150 __rtnl_newlink net/core/rtnetlink.c:3489 [inline] rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0: qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet Cc: Vlad Buslov Reported-by: syzbot Cc: Jamal Hadi Salim Cc: Cong Wang Cc: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman