user/sven/linux.git/include/linux, branch v5.19.5

watchdog: export lockup_detector_reconfigure

2022-08-25T09:45:51Z

[ Upstream commit 7c56a8733d0a2a4be2438a7512566e5ce552fccf ] In some circumstances it may be interesting to reconfigure the watchdog from inside the kernel. On PowerPC, this may helpful before and after a LPAR migration (LPM) is initiated, because it implies some latencies, watchdog, and especially NMI watchdog is expected to be triggered during this operation. Reconfiguring the watchdog with a factor, would prevent it to happen too frequently during LPM. Rename lockup_detector_reconfigure() as __lockup_detector_reconfigure() and create a new function lockup_detector_reconfigure() calling __lockup_detector_reconfigure() under the protection of watchdog_mutex. Signed-off-by: Laurent Dufour [mpe: Squash in build fix from Laurent, reported by Sachin] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220713154729.80789-3-ldufour@linux.ibm.com Signed-off-by: Sasha Levin

iommu/io-pgtable-arm-v7s: Add a quirk to allow pgtable PA up to 35bit

2022-08-25T09:45:48Z

[ Upstream commit bfdd231374181254742c5e2faef0bef2d30c0ee4 ] Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA and cause pgtable PA size larger than 32bit. Since Mediatek IOMMU hardware support at most 35bit PA in pgtable, so add a quirk to allow the PA of pgtables support up to bit35. Signed-off-by: Ning Li Signed-off-by: Yunfei Wang Reviewed-by: Robin Murphy Acked-by: Will Deacon Link: https://lore.kernel.org/r/20220630092927.24925-2-yf.wang@mediatek.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin

uacce: Handle parent device removal or parent driver module rmmod

2022-08-25T09:45:42Z

[ Upstream commit 80fc671bcc0173836e9032b0c698ea74c13b9d7c ] The uacce driver must deal with a possible removal of the parent device or parent driver module rmmod at any time. Although uacce_remove(), called on device removal and on driver unbind, prevents future use of the uacce fops by removing the cdev, fops that were called before that point may still be running. Serialize uacce_fops_open() and uacce_remove() with uacce->mutex. Serialize other fops against uacce_remove() with q->mutex. Since we need to protect uacce_fops_poll() which gets called on the fast path, replace uacce->queues_lock with q->mutex to improve scalability. The other fops are only used during setup. uacce_queue_is_valid(), checked under q->mutex or uacce->mutex, denotes whether uacce_remove() has disabled all queues. If that is the case, don't go any further since the parent device is being removed and uacce->ops should not be called anymore. Reported-by: Yang Shen Signed-off-by: Zhangfei Gao Signed-off-by: Jean-Philippe Brucker Link: https://lore.kernel.org/r/20220701034843.7502-1-zhangfei.gao@linaro.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: typec: mux: Add CONFIG guards for functions

2022-08-25T09:45:41Z

[ Upstream commit a37599ebfb656c2af4ca119de556eba29b6926d6 ] There are some drivers that can use the Type C mux API, but don't have to. Introduce CONFIG guards for the mux functions so that drivers can include the header file and not run into compilation errors on systems which don't have CONFIG_TYPEC enabled. When CONFIG_TYPEC is not enabled, the Type C mux functions will be stub versions of the original calls. Reported-by: kernel test robot Reviewed-by: Nícolas F. R. A. Prado Reviewed-by: Heikki Krogerus Reviewed-by: AngeloGioacchino Del Regno Tested-by: Nícolas F. R. A. Prado Signed-off-by: Prashant Malani Link: https://lore.kernel.org/r/20220615172129.1314056-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

SUNRPC: Don't reuse bvec on retransmission of the request

2022-08-25T09:45:15Z

commit 72691a269f0baad6d5f4aa7af97c29081b86d70f upstream. If a request is re-encoded and then retransmitted, we need to make sure that we also re-encode the bvec, in case the page lists have changed. Fixes: ff053dbbaffe ("SUNRPC: Move the call to xprt_send_pagedata() out of xprt_sock_sendmsg()") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman

SUNRPC: Fix xdr_encode_bool()

2022-08-25T09:45:15Z

commit c770f31d8f580ed4b965c64f924ec1cc50e41734 upstream. I discovered that xdr_encode_bool() was returning the same address that was passed in the @p parameter. The documenting comment states that the intent is to return the address of the next buffer location, just like the other "xdr_encode_*" helpers. The result was the encoded results of NFSv3 PATHCONF operations were not formed correctly. Fixes: ded04a587f6c ("NFSD: Update the NFSv3 PATHCONF3res encoder to use struct xdr_stream") Signed-off-by: Chuck Lever Reviewed-by: Jeff Layton Signed-off-by: Greg Kroah-Hartman

BPF: Fix potential bad pointer dereference in bpf_sys_bpf()

2022-08-25T09:45:13Z

commit e2dcac2f58f5a95ab092d1da237ffdc0da1832cf upstream. The bpf_sys_bpf() helper function allows an eBPF program to load another eBPF program from within the kernel. In this case the argument union bpf_attr pointer (as well as the insns and license pointers inside) is a kernel address instead of a userspace address (which is the case of a usual bpf() syscall). To make the memory copying process in the syscall work in both cases, bpfptr_t was introduced to wrap around the pointer and distinguish its origin. Specifically, when copying memory contents from a bpfptr_t, a copy_from_user() is performed in case of a userspace address and a memcpy() is performed for a kernel address. This can lead to problems because the in-kernel pointer is never checked for validity. The problem happens when an eBPF syscall program tries to call bpf_sys_bpf() to load a program but provides a bad insns pointer -- say 0xdeadbeef -- in the bpf_attr union. The helper calls __sys_bpf() which would then call bpf_prog_load() to load the program. bpf_prog_load() is responsible for copying the eBPF instructions to the newly allocated memory for the program; it creates a kernel bpfptr_t for insns and invokes copy_from_bpfptr(). Internally, all bpfptr_t operations are backed by the corresponding sockptr_t operations, which performs direct memcpy() on kernel pointers for copy_from/strncpy_from operations. Therefore, the code is always happy to dereference the bad pointer to trigger a un-handle-able page fault and in turn an oops. However, this is not supposed to happen because at that point the eBPF program is already verified and should not cause a memory error. Sample KASAN trace: [ 25.685056][ T228] ================================================================== [ 25.685680][ T228] BUG: KASAN: user-memory-access in copy_from_bpfptr+0x21/0x30 [ 25.686210][ T228] Read of size 80 at addr 00000000deadbeef by task poc/228 [ 25.686732][ T228] [ 25.686893][ T228] CPU: 3 PID: 228 Comm: poc Not tainted 5.19.0-rc7 #7 [ 25.687375][ T228] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014 [ 25.687991][ T228] Call Trace: [ 25.688223][ T228] [ 25.688429][ T228] dump_stack_lvl+0x73/0x9e [ 25.688747][ T228] print_report+0xea/0x200 [ 25.689061][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.689401][ T228] ? _printk+0x54/0x6e [ 25.689693][ T228] ? _raw_spin_lock_irqsave+0x70/0xd0 [ 25.690071][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.690412][ T228] kasan_report+0xb5/0xe0 [ 25.690716][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.691059][ T228] kasan_check_range+0x2bd/0x2e0 [ 25.691405][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.691734][ T228] memcpy+0x25/0x60 [ 25.692000][ T228] copy_from_bpfptr+0x21/0x30 [ 25.692328][ T228] bpf_prog_load+0x604/0x9e0 [ 25.692653][ T228] ? cap_capable+0xb4/0xe0 [ 25.692956][ T228] ? security_capable+0x4f/0x70 [ 25.693324][ T228] __sys_bpf+0x3af/0x580 [ 25.693635][ T228] bpf_sys_bpf+0x45/0x240 [ 25.693937][ T228] bpf_prog_f0ec79a5a3caca46_bpf_func1+0xa2/0xbd [ 25.694394][ T228] bpf_prog_run_pin_on_cpu+0x2f/0xb0 [ 25.694756][ T228] bpf_prog_test_run_syscall+0x146/0x1c0 [ 25.695144][ T228] bpf_prog_test_run+0x172/0x190 [ 25.695487][ T228] __sys_bpf+0x2c5/0x580 [ 25.695776][ T228] __x64_sys_bpf+0x3a/0x50 [ 25.696084][ T228] do_syscall_64+0x60/0x90 [ 25.696393][ T228] ? fpregs_assert_state_consistent+0x50/0x60 [ 25.696815][ T228] ? exit_to_user_mode_prepare+0x36/0xa0 [ 25.697202][ T228] ? syscall_exit_to_user_mode+0x20/0x40 [ 25.697586][ T228] ? do_syscall_64+0x6e/0x90 [ 25.697899][ T228] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 25.698312][ T228] RIP: 0033:0x7f6d543fb759 [ 25.698624][ T228] Code: 08 5b 89 e8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 a6 0e 00 f7 d8 64 89 01 48 [ 25.699946][ T228] RSP: 002b:00007ffc3df78468 EFLAGS: 00000287 ORIG_RAX: 0000000000000141 [ 25.700526][ T228] RAX: ffffffffffffffda RBX: 00007ffc3df78628 RCX: 00007f6d543fb759 [ 25.701071][ T228] RDX: 0000000000000090 RSI: 00007ffc3df78478 RDI: 000000000000000a [ 25.701636][ T228] RBP: 00007ffc3df78510 R08: 0000000000000000 R09: 0000000000300000 [ 25.702191][ T228] R10: 0000000000000005 R11: 0000000000000287 R12: 0000000000000000 [ 25.702736][ T228] R13: 00007ffc3df78638 R14: 000055a1584aca68 R15: 00007f6d5456a000 [ 25.703282][ T228] [ 25.703490][ T228] ================================================================== [ 25.704050][ T228] Disabling lock debugging due to kernel taint Update copy_from_bpfptr() and strncpy_from_bpfptr() so that: - for a kernel pointer, it uses the safe copy_from_kernel_nofault() and strncpy_from_kernel_nofault() functions. - for a userspace pointer, it performs copy_from_user() and strncpy_from_user(). Fixes: af2ac3e13e45 ("bpf: Prepare bpf syscall to be used from kernel and user space.") Link: https://lore.kernel.org/bpf/20220727132905.45166-1-jinghao@linux.ibm.com/ Signed-off-by: Jinghao Jia Acked-by: Yonghong Song Link: https://lore.kernel.org/r/20220729201713.88688-1-jinghao@linux.ibm.com Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman

kexec, KEYS: make the code in bzImage64_verify_sig generic

2022-08-21T13:20:08Z

commit c903dae8941deb55043ee46ded29e84e97cd84bb upstream. commit 278311e417be ("kexec, KEYS: Make use of platform keyring for signature verify") adds platform keyring support on x86 kexec but not arm64. The code in bzImage64_verify_sig uses the keys on the .builtin_trusted_keys, .machine, if configured and enabled, .secondary_trusted_keys, also if configured, and .platform keyrings to verify the signed kernel image as PE file. Cc: kexec@lists.infradead.org Cc: keyrings@vger.kernel.org Cc: linux-security-module@vger.kernel.org Reviewed-by: Michal Suchanek Signed-off-by: Coiby Xu Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman

Revert "devcoredump: remove the useless gfp_t parameter in dev_coredumpv and dev_coredumpm"

2022-08-17T13:16:19Z

commit 38a523a2946d3a0961d141d477a1ee2b1f3bdbb1 upstream. This reverts commit 77515ebaf01920e2db49e04672ef669a7c2907f2 as it causes build problems in linux-next. It needs to be reintroduced in a way that can allow the api to evolve and not require a "flag day" to catch all users. Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au Cc: Duoming Zhou Cc: Brian Norris Cc: Johannes Berg Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman

tpm: eventlog: Fix section mismatch for DEBUG_SECTION_MISMATCH

2022-08-17T13:16:17Z

[ Upstream commit bed4593645366ad7362a3aa7bc0d100d8d8236a8 ] If DEBUG_SECTION_MISMATCH enabled, __calc_tpm2_event_size() will not be inlined, this cause section mismatch like this: WARNING: modpost: vmlinux.o(.text.unlikely+0xe30c): Section mismatch in reference from the variable L0 to the function .init.text:early_ioremap() The function L0() references the function __init early_memremap(). This is often because L0 lacks a __init annotation or the annotation of early_ioremap is wrong. Fix it by using __always_inline instead of inline for the called-once function __calc_tpm2_event_size(). Fixes: 44038bc514a2 ("tpm: Abstract crypto agile event size calculations") Cc: stable@vger.kernel.org # v5.3 Reported-by: WANG Xuerui Signed-off-by: Huacai Chen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin