user/sven/linux.git/include/linux, branch v5.4.117

bpf: Fix leakage of uninitialized bpf stack under speculation

2021-05-07T08:51:37Z

commit 801c6058d14a82179a7ee17a4b532cac6fad067f upstream. The current implemented mechanisms to mitigate data disclosure under speculation mainly address stack and map value oob access from the speculative domain. However, Piotr discovered that uninitialized BPF stack is not protected yet, and thus old data from the kernel stack, potentially including addresses of kernel structures, could still be extracted from that 512 bytes large window. The BPF stack is special compared to map values since it's not zero initialized for every program invocation, whereas map values /are/ zero initialized upon their initial allocation and thus cannot leak any prior data in either domain. In the non-speculative domain, the verifier ensures that every stack slot read must have a prior stack slot write by the BPF program to avoid such data leaking issue. However, this is not enough: for example, when the pointer arithmetic operation moves the stack pointer from the last valid stack offset to the first valid offset, the sanitation logic allows for any intermediate offsets during speculative execution, which could then be used to extract any restricted stack content via side-channel. Given for unprivileged stack pointer arithmetic the use of unknown but bounded scalars is generally forbidden, we can simply turn the register-based arithmetic operation into an immediate-based arithmetic operation without the need for masking. This also gives the benefit of reducing the needed instructions for the operation. Given after the work in 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic mask"), the aux->alu_limit already holds the final immediate value for the offset register with the known scalar. Thus, a simple mov of the immediate to AX register with using AX as the source for the original instruction is sufficient and possible now in this case. Reported-by: Piotr Krysiuk Signed-off-by: Daniel Borkmann Tested-by: Piotr Krysiuk Reviewed-by: Piotr Krysiuk Reviewed-by: John Fastabend Acked-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman

ACPI: tables: x86: Reserve memory occupied by ACPI tables

2021-05-07T08:51:36Z

commit 1a1c130ab7575498eed5bcf7220037ae09cd1f8a upstream. The following problem has been reported by George Kennedy: Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy Tested-by: George Kennedy Signed-off-by: Rafael J. Wysocki Reviewed-by: Mike Rapoport Cc: 5.10+ # 5.10+ Signed-off-by: Greg Kroah-Hartman

gpio: omap: Save and restore sysconfig

2021-04-28T11:19:14Z

[ Upstream commit ddd8d94ca31e768c76cf8bfe34ba7b10136b3694 ] As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen Cc: Adam Ford Cc: Andreas Kemnade Cc: Grygorii Strashko Cc: Peter Ujfalusi Signed-off-by: Tony Lindgren Acked-by: Grygorii Strashko Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

net: phy: marvell: fix detection of PHY on Topaz switches

2021-04-21T10:56:18Z

commit 1fe976d308acb6374c899a4ee8025a0a016e453e upstream. Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading"), Linux reports the temperature of Topaz hwmon as constant -75°C. This is because switches from the Topaz family (88E6141 / 88E6341) have the address of the temperature sensor register different from Peridot. This address is instead compatible with 88E1510 PHYs, as was used for Topaz before the above mentioned commit. Create a new mapping table between switch family and PHY ID for families which don't have a model number. And define PHY IDs for Topaz and Peridot families. Create a new PHY ID and a new PHY driver for Topaz's internal PHY. The only difference from Peridot's PHY driver is the HWMON probing method. Prior this change Topaz's internal PHY is detected by kernel as: PHY [...] driver [Marvell 88E6390] (irq=63) And afterwards as: PHY [...] driver [Marvell 88E6341 Family] (irq=63) Signed-off-by: Pali Rohár BugLink: https://github.com/globalscaletechnologies/linux/issues/1 Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading") Reviewed-by: Marek Behún Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

netfilter: arp_tables: add pre_exit hook for table unregister

2021-04-21T10:56:16Z

commit d163a925ebbc6eb5b562b0f1d72c7e817aa75c40 upstream. Same problem that also existed in iptables/ip(6)tables, when arptable_filter is removed there is no longer a wait period before the table/ruleset is free'd. Unregister the hook in pre_exit, then remove the table in the exit function. This used to work correctly because the old nf_hook_unregister API did unconditional synchronize_net. The per-net hook unregister function uses call_rcu instead. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

netfilter: bridge: add pre_exit hooks for ebtable unregistration

2021-04-21T10:56:16Z

commit 7ee3c61dcd28bf6e290e06ad382f13511dc790e9 upstream. Just like ip/ip6/arptables, the hooks have to be removed, then synchronize_rcu() has to be called to make sure no more packets are being processed before the ruleset data is released. Place the hook unregistration in the pre_exit hook, then call the new ebtables pre_exit function from there. Years ago, when first netns support got added for netfilter+ebtables, this used an older (now removed) netfilter hook unregister API, that did a unconditional synchronize_rcu(). Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit handlers may free the ebtable ruleset while packets are still in flight. This can only happens on module removal, not during netns exit. The new function expects the table name, not the table struct. This is because upcoming patch set (targeting -next) will remove all net->xt.{nat,filter,broute}_table instances, this makes it necessary to avoid external references to those member variables. The existing APIs will be converted, so follow the upcoming scheme of passing name + hook type instead. Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman

net/mlx5: Fix PBMC register mapping

2021-04-14T06:24:17Z

[ Upstream commit 534b1204ca4694db1093b15cf3e79a99fcb6a6da ] Add reserved mapping to cover all the register in order to avoid setting arbitrary values to newer FW which implements the reserved fields. Fixes: 50b4a3c23646 ("net/mlx5: PPTB and PBMC register firmware command support") Signed-off-by: Aya Levin Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

net/mlx5: Fix placement of log_max_flow_counter

2021-04-14T06:24:17Z

[ Upstream commit a14587dfc5ad2312dabdd42a610d80ecd0dc8bea ] The cited commit wrongly placed log_max_flow_counter field of mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended placement. Fixes: 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow counters") Signed-off-by: Raed Salem Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

net: ensure mac header is set in virtio_net_hdr_to_skb()

2021-04-14T06:24:12Z

commit 61431a5907fc36d0738e9a547c7e1556349a03e9 upstream. Commit 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct") added a call to dev_parse_header_protocol() but mac_header is not yet set. This means that eth_hdr() reads complete garbage, and syzbot complained about it [1] This patch resets mac_header earlier, to get more coverage about this change. Audit of virtio_net_hdr_to_skb() callers shows that this change should be safe. [1] BUG: KASAN: use-after-free in eth_header_parse_protocol+0xdc/0xe0 net/ethernet/eth.c:282 Read of size 2 at addr ffff888017a6200b by task syz-executor313/8409 CPU: 1 PID: 8409 Comm: syz-executor313 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 eth_header_parse_protocol+0xdc/0xe0 net/ethernet/eth.c:282 dev_parse_header_protocol include/linux/netdevice.h:3177 [inline] virtio_net_hdr_to_skb.constprop.0+0x99d/0xcd0 include/linux/virtio_net.h:83 packet_snd net/packet/af_packet.c:2994 [inline] packet_sendmsg+0x2325/0x52b0 net/packet/af_packet.c:3031 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 sock_no_sendpage+0xf3/0x130 net/core/sock.c:2860 kernel_sendpage.part.0+0x1ab/0x350 net/socket.c:3631 kernel_sendpage net/socket.c:3628 [inline] sock_sendpage+0xe5/0x140 net/socket.c:947 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0xd4/0x140 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] do_splice+0xb7e/0x1940 fs/splice.c:1079 __do_splice+0x134/0x250 fs/splice.c:1144 __do_sys_splice fs/splice.c:1350 [inline] __se_sys_splice fs/splice.c:1332 [inline] __x64_sys_splice+0x198/0x250 fs/splice.c:1332 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct") Signed-off-by: Eric Dumazet Cc: Balazs Nemeth Cc: Willem de Bruijn Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bpf, sockmap: Fix sk->prot unhash op reset

2021-04-14T06:24:12Z

commit 1c84b33101c82683dee8b06761ca1f69e78c8ee7 upstream. In '4da6a196f93b1' we fixed a potential unhash loop caused when a TLS socket in a sockmap was removed from the sockmap. This happened because the unhash operation on the TLS ctx continued to point at the sockmap implementation of unhash even though the psock has already been removed. The sockmap unhash handler when a psock is removed does the following, void sock_map_unhash(struct sock *sk) { void (*saved_unhash)(struct sock *sk); struct sk_psock *psock; rcu_read_lock(); psock = sk_psock(sk); if (unlikely(!psock)) { rcu_read_unlock(); if (sk->sk_prot->unhash) sk->sk_prot->unhash(sk); return; } [...] } The unlikely() case is there to handle the case where psock is detached but the proto ops have not been updated yet. But, in the above case with TLS and removed psock we never fixed sk_prot->unhash() and unhash() points back to sock_map_unhash resulting in a loop. To fix this we added this bit of code, static inline void sk_psock_restore_proto(struct sock *sk, struct sk_psock *psock) { sk->sk_prot->unhash = psock->saved_unhash; This will set the sk_prot->unhash back to its saved value. This is the correct callback for a TLS socket that has been removed from the sock_map. Unfortunately, this also overwrites the unhash pointer for all psocks. We effectively break sockmap unhash handling for any future socks. Omitting the unhash operation will leave stale entries in the map if a socket transition through unhash, but does not do close() op. To fix set unhash correctly before calling into tls_update. This way the TLS enabled socket will point to the saved unhash() handler. Fixes: 4da6a196f93b1 ("bpf: Sockmap/tls, during free we may call tcp_bpf_unhash() in loop") Reported-by: Cong Wang Reported-by: Lorenz Bauer Suggested-by: Cong Wang Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/161731441904.68884.15593917809745631972.stgit@john-XPS-13-9370 Signed-off-by: Greg Kroah-Hartman