user/sven/linux.git/include/linux, branch v5.4.122

vt: Fix character height handling with VT_RESIZEX

2021-05-26T10:05:20Z

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream. Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

virtio_net: Do not pull payload in skb->head

2021-05-22T09:38:28Z

[ Upstream commit 0f6925b3e8da0dbbb52447ca8a8b42b371aac7db ] Xuan Zhuo reported that commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") brought a ~10% performance drop. The reason for the performance drop was that GRO was forced to chain sk_buff (using skb_shinfo(skb)->frag_list), which uses more memory but also cause packet consumers to go over a lot of overhead handling all the tiny skbs. It turns out that virtio_net page_to_skb() has a wrong strategy : It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then copies 128 bytes from the page, before feeding the packet to GRO stack. This was suboptimal before commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") because GRO was using 2 frags per MSS, meaning we were not packing MSS with 100% efficiency. Fix is to pull only the ethernet header in page_to_skb() Then, we change virtio_net_hdr_to_skb() to pull the missing headers, instead of assuming they were already pulled by callers. This fixes the performance regression, but could also allow virtio_net to accept packets with more than 128bytes of headers. Many thanks to Xuan Zhuo for his report, and his tests/help. Fixes: 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") Reported-by: Xuan Zhuo Link: https://www.spinics.net/lists/netdev/msg731397.html Co-Developed-by: Xuan Zhuo Signed-off-by: Xuan Zhuo Signed-off-by: Eric Dumazet Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: virtualization@lists.linux-foundation.org Acked-by: Jason Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

mm: fix struct page layout on 32-bit systems

2021-05-19T08:08:31Z

commit 9ddb3c14afba8bc5950ed297f02d4ae05ff35cd1 upstream. 32-bit architectures which expect 8-byte alignment for 8-byte integers and need 64-bit DMA addresses (arm, mips, ppc) had their struct page inadvertently expanded in 2019. When the dma_addr_t was added, it forced the alignment of the union to 8 bytes, which inserted a 4 byte gap between 'flags' and the union. Fix this by storing the dma_addr_t in one or two adjacent unsigned longs. This restores the alignment to that of an unsigned long. We always store the low bits in the first word to prevent the PageTail bit from being inadvertently set on a big endian platform. If that happened, get_user_pages_fast() racing against a page which was freed and reallocated to the page_pool could dereference a bogus compound_head(), which would be hard to trace back to this cause. Link: https://lkml.kernel.org/r/20210510153211.1504886-1-willy@infradead.org Fixes: c25fff7171be ("mm: add dma_addr_t to struct page") Signed-off-by: Matthew Wilcox (Oracle) Acked-by: Ilias Apalodimas Acked-by: Jesper Dangaard Brouer Acked-by: Vlastimil Babka Tested-by: Matteo Croce Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

iomap: fix sub-page uptodate handling

2021-05-19T08:08:30Z

commit 1cea335d1db1ce6ab71b3d2f94a807112b738a0f upstream. bio completions can race when a page spans more than one file system block. Add a spinlock to synchronize marking the page uptodate. Fixes: 9dc55f1389f9 ("iomap: add support for sub-pagesize buffered I/O without buffer heads") Reported-by: Jan Stancek Signed-off-by: Christoph Hellwig Reviewed-by: Dave Chinner Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Cc: "Matthew Wilcox (Oracle)" Signed-off-by: Greg Kroah-Hartman

kyber: fix out of bounds access when preempted

2021-05-19T08:08:30Z

[ Upstream commit efed9a3337e341bd0989161b97453b52567bc59d ] __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch. Fixes: a6088845c2bf ("block: kyber: make kyber more friendly with merging") Reported-by: Jakub Kicinski Signed-off-by: Omar Sandoval Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

mm/hugetlb: fix F_SEAL_FUTURE_WRITE

2021-05-19T08:08:29Z

commit 22247efd822e6d263f3c8bd327f3f769aea9b1d9 upstream. Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2. Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to hugetlbfs, which I can easily verify using the memfd_test program, which seems that the program is hardly run with hugetlbfs pages (as by default shmem). Meanwhile I found another probably even more severe issue on that hugetlb fork won't wr-protect child cow pages, so child can potentially write to parent private pages. Patch 2 addresses that. After this series applied, "memfd_test hugetlbfs" should start to pass. This patch (of 2): F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day. There is a test program for that and it fails constantly. $ ./memfd_test hugetlbfs memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE mmap() didn't fail as expected Aborted (core dumped) I think it's probably because no one is really running the hugetlbfs test. Fix it by checking FUTURE_WRITE also in hugetlbfs_file_mmap() as what we do in shmem_mmap(). Generalize a helper for that. Link: https://lkml.kernel.org/r/20210503234356.9097-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210503234356.9097-2-peterx@redhat.com Fixes: ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Signed-off-by: Peter Xu Reported-by: Hugh Dickins Reviewed-by: Mike Kravetz Cc: Joel Fernandes (Google) Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

i2c: Add I2C_AQ_NO_REP_START adapter quirk

2021-05-19T08:08:22Z

[ Upstream commit aca01415e076aa96cca0f801f4420ee5c10c660d ] This quirk signifies that the adapter cannot do a repeated START, it always issues a STOP condition after transfers. Suggested-by: Wolfram Sang Signed-off-by: Bence Csókás Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

PM: runtime: Fix unpaired parent child_count for force_resume

2021-05-19T08:08:20Z

commit c745253e2a691a40c66790defe85c104a887e14a upstream. As pm_runtime_need_not_resume() relies also on usage_count, it can return a different value in pm_runtime_force_suspend() compared to when called in pm_runtime_force_resume(). Different return values can happen if anything calls PM runtime functions in between, and causes the parent child_count to increase on every resume. So far I've seen the issue only for omapdrm that does complicated things with PM runtime calls during system suspend for legacy reasons: omap_atomic_commit_tail() for omapdrm.0 dispc_runtime_get() wakes up 58000000.dss as it's the dispc parent dispc_runtime_resume() rpm_resume() increases parent child_count dispc_runtime_put() won't idle, PM runtime suspend blocked pm_runtime_force_suspend() for 58000000.dss, !pm_runtime_need_not_resume() __update_runtime_status() system suspended pm_runtime_force_resume() for 58000000.dss, pm_runtime_need_not_resume() pm_runtime_enable() only called because of pm_runtime_need_not_resume() omap_atomic_commit_tail() for omapdrm.0 dispc_runtime_get() wakes up 58000000.dss as it's the dispc parent dispc_runtime_resume() rpm_resume() increases parent child_count dispc_runtime_put() won't idle, PM runtime suspend blocked ... rpm_suspend for 58000000.dss but parent child_count is now unbalanced Let's fix the issue by adding a flag for needs_force_resume and use it in pm_runtime_force_resume() instead of pm_runtime_need_not_resume(). Additionally omapdrm system suspend could be simplified later on to avoid lots of unnecessary PM runtime calls and the complexity it adds. The driver can just use internal functions that are shared between the PM runtime and system suspend related functions. Fixes: 4918e1f87c5f ("PM / runtime: Rework pm_runtime_force_suspend/resume()") Signed-off-by: Tony Lindgren Reviewed-by: Ulf Hansson Tested-by: Tomi Valkeinen Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

smp: Fix smp_call_function_single_async prototype

2021-05-14T07:44:33Z

commit 1139aeb1c521eb4a050920ce6c64c36c4f2a3ab7 upstream. As of commit 966a967116e6 ("smp: Avoid using two cache lines for struct call_single_data"), the smp code prefers 32-byte aligned call_single_data objects for performance reasons, but the block layer includes an instance of this structure in the main 'struct request' that is more senstive to size than to performance here, see 4ccafe032005 ("block: unalign call_single_data in struct request"). The result is a violation of the calling conventions that clang correctly points out: block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch] smp_call_function_single_async(cpu, &rq->csd); It does seem that the usage of the call_single_data without cache line alignment should still be allowed by the smp code, so just change the function prototype so it accepts both, but leave the default alignment unchanged for the other users. This seems better to me than adding a local hack to shut up an otherwise correct warning in the caller. Signed-off-by: Arnd Bergmann Signed-off-by: Peter Zijlstra (Intel) Acked-by: Jens Axboe Link: https://lkml.kernel.org/r/20210505211300.3174456-1-arnd@kernel.org [nc: Fix conflicts] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

HID: plantronics: Workaround for double volume key presses

2021-05-14T07:44:26Z

[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ] Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice for each volume key press. This patch adds a quirk to hid-plantronics for this product ID, which will ignore the second volume key press if it happens within 5 ms from the last one that was handled. The patch was tested on the mentioned model only, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected, because the rate is about 3 times per second, which is far less frequent than once in 5 ms. Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls") Signed-off-by: Maxim Mikityanskiy Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin