user/sven/linux.git/include/linux, branch v5.4.220

io_uring/af_unix: defer registered files gc to io_uring release

2022-10-26T11:22:59Z

[ upstream commit 0091bfc81741b8d3aeb3b7ab8636f911b2de6e80 ] Instead of putting io_uring's registered files in unix_gc() we want it to be done by io_uring itself. The trick here is to consider io_uring registered files for cycle detection but not actually putting them down. Because io_uring can't register other ring instances, this will remove all refs to the ring file triggering the ->release path and clean up with io_ring_ctx_free(). Cc: stable@vger.kernel.org Fixes: 6b06314c47e1 ("io_uring: add file set registration") Reported-and-tested-by: David Bouman Signed-off-by: Pavel Begunkov Signed-off-by: Thadeu Lima de Souza Cascardo [axboe: add kerneldoc comment to skb, fold in skb leak fix] Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

iommu/iova: Fix module config properly

2022-10-26T11:22:46Z

[ Upstream commit 4f58330fcc8482aa90674e1f40f601e82f18ed4a ] IOMMU_IOVA is intended to be an optional library for users to select as and when they desire. Since it can be a module now, this means that built-in code which has chosen not to select it should not fail to link if it happens to have selected as a module by someone else. Replace IS_ENABLED() with IS_REACHABLE() to do the right thing. CC: Thierry Reding Reported-by: John Garry Fixes: 15bbdec3931e ("iommu: Make the iova library a module") Signed-off-by: Robin Murphy Reviewed-by: Thierry Reding Link: https://lore.kernel.org/r/548c2f683ca379aface59639a8f0cccc3a1ac050.1663069227.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin

ata: fix ata_id_has_dipm()

2022-10-26T11:22:39Z

[ Upstream commit 630624cb1b5826d753ac8e01a0e42de43d66dedf ] ACS-5 section 7.13.6.36 Word 78: Serial ATA features supported states that: If word 76 is not 0000h or FFFFh, word 78 reports the features supported by the device. If this word is not supported, the word shall be cleared to zero. (This text also exists in really old ACS standards, e.g. ACS-3.) The problem with ata_id_has_dipm() is that the while it performs a check against 0 and 0xffff, it performs the check against ATA_ID_FEATURE_SUPP (word 78), the same word where the feature bit is stored. Fix this by performing the check against ATA_ID_SATA_CAPABILITY (word 76), like required by the spec. The feature bit check itself is of course still performed against ATA_ID_FEATURE_SUPP (word 78). Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros (which already have this check), thus making it more likely that the next ATA_ID_FEATURE_SUPP macro that is added will include this check. Fixes: ca77329fb713 ("[libata] Link power management infrastructure") Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: fix ata_id_has_ncq_autosense()

2022-10-26T11:22:38Z

[ Upstream commit a5fb6bf853148974dbde092ec1bde553bea5e49f ] ACS-5 section 7.13.6.36 Word 78: Serial ATA features supported states that: If word 76 is not 0000h or FFFFh, word 78 reports the features supported by the device. If this word is not supported, the word shall be cleared to zero. (This text also exists in really old ACS standards, e.g. ACS-3.) Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros (which already have this check), thus making it more likely that the next ATA_ID_FEATURE_SUPP macro that is added will include this check. Fixes: 5b01e4b9efa0 ("libata: Implement NCQ autosense") Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: fix ata_id_has_devslp()

2022-10-26T11:22:38Z

[ Upstream commit 9c6e09a434e1317e09b78b3b69cd384022ec9a03 ] ACS-5 section 7.13.6.36 Word 78: Serial ATA features supported states that: If word 76 is not 0000h or FFFFh, word 78 reports the features supported by the device. If this word is not supported, the word shall be cleared to zero. (This text also exists in really old ACS standards, e.g. ACS-3.) Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros (which already have this check), thus making it more likely that the next ATA_ID_FEATURE_SUPP macro that is added will include this check. Fixes: 65fe1f0f66a5 ("ahci: implement aggressive SATA device sleep support") Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()

2022-10-26T11:22:38Z

[ Upstream commit 690aa8c3ae308bc696ec8b1b357b995193927083 ] ACS-5 section 7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled states that: If bit 15 of word 86 is set to one, bit 14 of word 119 is set to one, and bit 15 of word 119 is cleared to zero, then word 119 is valid. If bit 15 of word 86 is set to one, bit 14 of word 120 is set to one, and bit 15 of word 120 is cleared to zero, then word 120 is valid. (This text also exists in really old ACS standards, e.g. ACS-3.) Currently, ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting() both check bit 15 of word 86, but neither of them check that bit 14 of word 119 is set to one, or that bit 15 of word 119 is cleared to zero. Additionally, make ata_id_sense_reporting_enabled() return false if !ata_id_has_sense_reporting(), similar to how e.g. ata_id_flush_ext_enabled() returns false if !ata_id_has_flush_ext(). Fixes: e87fd28cf9a2 ("libata: Implement support for sense data reporting") Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

dyndbg: fix module.dyndbg handling

2022-10-26T11:22:37Z

[ Upstream commit 85d6b66d31c35158364058ee98fb69ab5bb6a6b1 ] For CONFIG_DYNAMIC_DEBUG=N, the ddebug_dyndbg_module_param_cb() stub-fn is too permissive: bash-5.1# modprobe drm JUNKdyndbg bash-5.1# modprobe drm dyndbgJUNK [ 42.933220] dyndbg param is supported only in CONFIG_DYNAMIC_DEBUG builds [ 42.937484] ACPI: bus type drm_connector registered This caused no ill effects, because unknown parameters are either ignored by default with an "unknown parameter" warning, or ignored because dyndbg allows its no-effect use on non-dyndbg builds. But since the code has an explicit feedback message, it should be issued accurately. Fix with strcmp for exact param-name match. Fixes: b48420c1d301 dynamic_debug: make dynamic-debug work for module initialization Reported-by: Rasmus Villemoes Acked-by: Jason Baron Acked-by: Daniel Vetter Signed-off-by: Jim Cromie Link: https://lore.kernel.org/r/20220904214134.408619-3-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

once: add DO_ONCE_SLOW() for sleepable contexts

2022-10-26T11:22:27Z

[ Upstream commit 62c07983bef9d3e78e71189441e1a470f0d1e653 ] Christophe Leroy reported a ~80ms latency spike happening at first TCP connect() time. This is because __inet_hash_connect() uses get_random_once() to populate a perturbation table which became quite big after commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16") get_random_once() uses DO_ONCE(), which block hard irqs for the duration of the operation. This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock for operations where we prefer to stay in process context. Then __inet_hash_connect() can use get_random_slow_once() to populate its perturbation table. Fixes: 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16") Fixes: 190cc82489f4 ("tcp: change source port randomizarion at connect() time") Reported-by: Christophe Leroy Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t Signed-off-by: Eric Dumazet Cc: Willy Tarreau Tested-by: Christophe Leroy Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited

2022-10-26T11:22:26Z

[ Upstream commit f4ce91ce12a7c6ead19b128ffa8cff6e3ded2a14 ] This commit fixes a bug in the tracking of max_packets_out and is_cwnd_limited. This bug can cause the connection to fail to remember that is_cwnd_limited is true, causing the connection to fail to grow cwnd when it should, causing throughput to be lower than it should be. The following event sequence is an example that triggers the bug: (a) The connection is cwnd_limited, but packets_out is not at its peak due to TSO deferral deciding not to send another skb yet. In such cases the connection can advance max_packets_seq and set tp->is_cwnd_limited to true and max_packets_out to a small number. (b) Then later in the round trip the connection is pacing-limited (not cwnd-limited), and packets_out is larger. In such cases the connection would raise max_packets_out to a bigger number but (unexpectedly) flip tp->is_cwnd_limited from true to false. This commit fixes that bug. One straightforward fix would be to separately track (a) the next window after max_packets_out reaches a maximum, and (b) the next window after tp->is_cwnd_limited is set to true. But this would require consuming an extra u32 sequence number. Instead, to save space we track only the most important information. Specifically, we track the strongest available signal of the degree to which the cwnd is fully utilized: (1) If the connection is cwnd-limited then we remember that fact for the current window. (2) If the connection not cwnd-limited then we track the maximum number of outstanding packets in the current window. In particular, note that the new logic cannot trigger the buggy (a)/(b) sequence above because with the new logic a condition where tp->packets_out > tp->max_packets_out can only trigger an update of tp->is_cwnd_limited if tp->is_cwnd_limited is false. This first showed up in a testing of a BBRv2 dev branch, but this buggy behavior highlighted a general issue with the tcp_cwnd_validate() logic that can cause cwnd to fail to increase at the proper rate for any TCP congestion control, including Reno or CUBIC. Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler") Signed-off-by: Neal Cardwell Signed-off-by: Kevin(Yudong) Yang Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

x86/bugs: Report AMD retbleed vulnerability

2022-10-07T07:16:54Z

commit 6b80b59b3555706508008f1f127b5412c89c7fd8 upstream. Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary Speculative Code Execution with Return Instructions) attack. [peterz: add hygon] [kim: invert parity; fam15h] Co-developed-by: Kim Phillips Signed-off-by: Kim Phillips Signed-off-by: Alexandre Chartre Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov [cascardo: adjusted BUG numbers to match upstream] Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman