user/sven/linux.git/include/linux, branch v5.4.250

rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer()

2023-06-28T08:18:38Z

[ Upstream commit a63fc6b75cca984c71f095282e0227a390ba88f3 ] Although the rcu_swap_protected() macro follows the example of swap(), the interactions with RCU make its update of its argument somewhat counter-intuitive. This commit therefore introduces an rcu_replace_pointer() that returns the old value of the RCU pointer instead of doing the argument update. Once all the uses of rcu_swap_protected() are updated to instead use rcu_replace_pointer(), rcu_swap_protected() will be removed. Link: https://lore.kernel.org/lkml/CAHk-=wiAsJLw1egFEE=Z7-GGtM6wcvtyytXZA1+BHqta4gg6Hw@mail.gmail.com/ Reported-by: Linus Torvalds [ paulmck: From rcu_replace() to rcu_replace_pointer() per Ingo Molnar. ] Signed-off-by: Paul E. McKenney Cc: Bart Van Assche Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: Shane M Seymour Cc: Martin K. Petersen Stable-dep-of: a61675294735 ("ieee802154: hwsim: Fix possible memory leaks") Signed-off-by: Sasha Levin

list: add "list_del_init_careful()" to go with "list_empty_careful()"

2023-06-28T08:18:35Z

[ Upstream commit c6fe44d96fc1536af5b11cd859686453d1b7bfd1 ] That gives us ordering guarantees around the pair. Signed-off-by: Linus Torvalds Stable-dep-of: 2192bba03d80 ("epoll: ep_autoremove_wake_function should use list_del_init_careful") Signed-off-by: Sasha Levin

Remove DECnet support from kernel

2023-06-21T13:44:10Z

commit 1202cdd665315c525b5237e96e0bedc76d7e754f upstream. DECnet is an obsolete network protocol that receives more attention from kernel janitors than users. It belongs in computer protocol history museum not in Linux kernel. It has been "Orphaned" in kernel since 2010. The iproute2 support for DECnet was dropped in 5.0 release. The documentation link on Sourceforge says it is abandoned there as well. Leave the UAPI alone to keep userspace programs compiling. This means that there is still an empty neighbour table for AF_DECNET. The table of /proc/sys/net entries was updated to match current directories and reformatted to be alphabetical. Signed-off-by: Stephen Hemminger Acked-by: David Ahern Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

usb: usbfs: Enforce page requirements for mmap

2023-06-14T08:59:58Z

commit 0143d148d1e882fb1538dc9974c94d63961719b9 upstream. The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

rfs: annotate lockless accesses to RFS sock flow table

2023-06-14T08:59:56Z

[ Upstream commit 5c3b74a92aa285a3df722bf6329ba7ccf70346d6 ] Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table. This also prevents a (smart ?) compiler to remove the condition in: if (table->ents[index] != newval) table->ents[index] = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Reviewed-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ocfs2/dlm: move BITS_TO_BYTES() to bitops.h for wider use

2023-06-09T08:28:54Z

[ Upstream commit dd3e7cba16274831f5a69f071ed3cf13ffb352ea ] There are users already and will be more of BITS_TO_BYTES() macro. Move it to bitops.h for wider use. In the case of ocfs2 the replacement is identical. As for bnx2x, there are two places where floor version is used. In the first case to calculate the amount of structures that can fit one memory page. In this case obviously the ceiling variant is correct and original code might have a potential bug, if amount of bits % 8 is not 0. In the second case the macro is used to calculate bytes transmitted in one microsecond. This will work for all speeds which is multiply of 1Gbps without any change, for the rest new code will give ceiling value, for instance 100Mbps will give 13 bytes, while old code gives 12 bytes and the arithmetically correct one is 12.5 bytes. Further the value is used to setup timer threshold which in any case has its own margins due to certain resolution. I don't see here an issue with slightly shifting thresholds for low speed connections, the card is supposed to utilize highest available rate, which is usually 10Gbps. Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko Reviewed-by: Joseph Qi Acked-by: Sudarsana Reddy Kalluru Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: f4e4534850a9 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report") Signed-off-by: Sasha Levin

fs: fix undefined behavior in bit shift for SB_NOUSER

2023-06-05T06:17:32Z

[ Upstream commit f15afbd34d8fadbd375f1212e97837e32bc170cc ] Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. It was spotted by UBSAN. So let's just fix this by using the BIT() helper for all SB_* flags. Fixes: e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") Signed-off-by: Hao Ge Message-Id: <20230424051835.374204-1-gehao@kylinos.cn> [brauner@kernel.org: use BIT() for all SB_* flags] Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin

power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()

2023-06-05T06:17:31Z

[ Upstream commit 2220af8ca61ae67de4ec3deec1c6395a2f65b9fd ] Some (USB) charger ICs have variants with USB D+ and D- pins to do their own builtin charger-type detection, like e.g. the bq24190 and bq25890 and also variants which lack this functionality, e.g. the bq24192 and bq25892. In case the charger-type; and thus the input-current-limit detection is done outside the charger IC then we need some way to communicate this to the charger IC. In the past extcon was used for this, but if the external detection does e.g. full USB PD negotiation then the extcon cable-types do not convey enough information. For these setups it was decided to model the external charging "brick" and the parameters negotiated with it as a power_supply class-device itself; and power_supply_set_input_current_limit_from_supplier() was introduced to allow drivers to get the input-current-limit this way. But in some cases psy drivers may want to know other properties, e.g. the bq25892 can do "quick-charge" negotiation by pulsing its current draw, but this should only be done if the usb_type psy-property of its supplier is set to DCP (and device-properties indicate the board allows higher voltages). Instead of adding extra helper functions for each property which a psy-driver wants to query from its supplier, refactor power_supply_set_input_current_limit_from_supplier() into a more generic power_supply_get_property_from_supplier() function. Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Stable-dep-of: 77c2a3097d70 ("power: supply: bq24190: Call power_supply_changed() after updating input current") Signed-off-by: Sasha Levin

cdc_ncm: Implement the 32-bit version of NCM Transfer Block

2023-06-05T06:17:31Z

[ Upstream commit 0fa81b304a7973a499f844176ca031109487dd31 ] The NCM specification defines two formats of transfer blocks: with 16-bit fields (NTB-16) and with 32-bit fields (NTB-32). Currently only NTB-16 is implemented. This patch adds the support of NTB-32. The motivation behind this is that some devices such as E5785 or E5885 from the current generation of Huawei LTE routers do not support NTB-16. The previous generations of Huawei devices are also use NTB-32 by default. Also this patch enables NTB-32 by default for Huawei devices. During the 2019 ValdikSS made five attempts to contact Huawei to add the NTB-16 support to their router firmware, but they were unsuccessful. Signed-off-by: Alexander Bersenev Signed-off-by: David S. Miller Stable-dep-of: 7e01c7f7046e ("net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize") Signed-off-by: Sasha Levin

power: supply: bq27xxx: Fix poll_interval handling and races on remove

2023-05-30T11:44:10Z

commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream. Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman