user/sven/linux.git/include/linux, branch v5.4.279

ftruncate: pass a signed offset

2024-07-05T07:08:31Z

commit 4b8e88e563b5f666446d002ad0dc1e6e8e7102b0 upstream. The old ftruncate() syscall, using the 32-bit off_t misses a sign extension when called in compat mode on 64-bit architectures. As a result, passing a negative length accidentally succeeds in truncating to file size between 2GiB and 4GiB. Changing the type of the compat syscall to the signed compat_off_t changes the behavior so it instead returns -EINVAL. The native entry point, the truncate() syscall and the corresponding loff_t based variants are all correct already and do not suffer from this mistake. Fixes: 3f6d078d4acc ("fix compat truncate/ftruncate") Reviewed-by: Christian Brauner Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

nvme: fixup comment for nvme RDMA Provider Type

2024-07-05T07:08:28Z

[ Upstream commit f80a55fa90fa76d01e3fffaa5d0413e522ab9a00 ] PRTYPE is the provider type, not the QP service type. Fixes: eb793e2c9286 ("nvme.h: add NVMe over Fabrics definitions") Signed-off-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

net: phy: mchp: Add support for LAN8814 QUAD PHY

2024-07-05T07:08:27Z

[ Upstream commit 1623ad8ec04c771a54975fb84b22bc21c2dbcac1 ] LAN8814 is a low-power, quad-port triple-speed (10BASE-T/100BASETX/1000BASE-T) Ethernet physical layer transceiver (PHY). It supports transmission and reception of data on standard CAT-5, as well as CAT-5e and CAT-6, unshielded twisted pair (UTP) cables. LAN8814 supports industry-standard QSGMII (Quad Serial Gigabit Media Independent Interface) and Q-USGMII (Quad Universal Serial Gigabit Media Independent Interface) providing chip-to-chip connection to four Gigabit Ethernet MACs using a single serialized link (differential pair) in each direction. The LAN8814 SKU supports high-accuracy timestamping functions to support IEEE-1588 solutions using Microchip Ethernet switches, as well as customer solutions based on SoCs and FPGAs. The LAN8804 SKU has same features as that of LAN8814 SKU except that it does not support 1588, SyncE, or Q-USGMII with PCH/MCH. This adds support for 10BASE-T, 100BASE-TX, and 1000BASE-T, QSGMII link with the MAC. Signed-off-by: Divya Koppera Signed-off-by: David S. Miller Stable-dep-of: 54a4e5c16382 ("net: phy: micrel: add Microchip KSZ 9477 to the device table") Signed-off-by: Sasha Levin

PCI: Add PCI_ERROR_RESPONSE and related definitions

2024-07-05T07:08:25Z

[ Upstream commit 57bdeef4716689d9b0e3571034d65cf420f6efcd ] A config or MMIO read from a PCI device that doesn't exist or doesn't respond causes a PCI error. There's no real data to return to satisfy the CPU read, so most hardware fabricates ~0 data. Add a PCI_ERROR_RESPONSE definition for that and use it where appropriate to make these checks consistent and easier to find. Also add helper definitions PCI_SET_ERROR_RESPONSE() and PCI_POSSIBLE_ERROR() to make the code more readable. Suggested-by: Bjorn Helgaas Link: https://lore.kernel.org/r/55563bf4dfc5d3fdc96695373c659d099bf175b1.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu Signed-off-by: Bjorn Helgaas Reviewed-by: Pali Rohár Stable-dep-of: c625dabbf1c4 ("x86/amd_nb: Check for invalid SMN reads") Signed-off-by: Sasha Levin

iommu: Return right value in iommu_sva_bind_device()

2024-07-05T07:08:16Z

[ Upstream commit 89e8a2366e3bce584b6c01549d5019c5cda1205e ] iommu_sva_bind_device() should return either a sva bond handle or an ERR_PTR value in error cases. Existing drivers (idxd and uacce) only check the return value with IS_ERR(). This could potentially lead to a kernel NULL pointer dereference issue if the function returns NULL instead of an error pointer. In reality, this doesn't cause any problems because iommu_sva_bind_device() only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA. In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will return an error, and the device drivers won't call iommu_sva_bind_device() at all. Fixes: 26b25a2b98e4 ("iommu: Bind process address spaces to devices") Signed-off-by: Lu Baolu Reviewed-by: Jean-Philippe Brucker Reviewed-by: Kevin Tian Reviewed-by: Vasant Hegde Link: https://lore.kernel.org/r/20240528042528.71396-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin

params: lift param_set_uint_minmax to common code

2024-06-16T11:28:45Z

[ Upstream commit 2a14c9ae15a38148484a128b84bff7e9ffd90d68 ] It is a useful helper hence move it to common code so others can enjoy it. Suggested-by: Christoph Hellwig Reviewed-by: Chaitanya Kulkarni Reviewed-by: Hannes Reinecke Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Stable-dep-of: 3ebc46ca8675 ("tcp: Fix shift-out-of-bounds in dctcp_update_alpha().") Signed-off-by: Sasha Levin

xfrm: Preserve vlan tags for transport mode software GRO

2024-05-17T09:43:53Z

[ Upstream commit 58fbfecab965014b6e3cc956a76b4a96265a1add ] The software GRO path for esp transport mode uses skb_mac_header_rebuild prior to re-injecting the packet via the xfrm_napi_dev. This only copies skb->mac_len bytes of header which may not be sufficient if the packet contains 802.1Q tags or other VLAN tags. Worse copying only the initial header will leave a packet marked as being VLAN tagged but without the corresponding tag leading to mangling when it is later untagged. The VLAN tags are important when receiving the decrypted esp transport mode packet after GRO processing to ensure it is received on the correct interface. Therefore record the full mac header length in xfrm*_transport_input for later use in corresponding xfrm*_transport_finish to copy the entire mac header when rebuilding the mac header for GRO. The skb->data pointer is left pointing skb->mac_header bytes after the start of the mac header as is expected by the network stack and network and transport header offsets reset to this location. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Paul Davey Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

sunrpc: add a struct rpc_stats arg to rpc_create_args

2024-05-17T09:43:48Z

[ Upstream commit 2057a48d0dd00c6a2a94ded7df2bf1d3f2a4a0da ] We want to be able to have our rpc stats handled in a per network namespace manner, so add an option to rpc_create_args to specify a different rpc_stats struct instead of using the one on the rpc_program. Signed-off-by: Josef Bacik Signed-off-by: Trond Myklebust Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().") Signed-off-by: Sasha Levin

serial: core: fix kernel-doc for uart_port_unlock_irqrestore()

2024-05-02T14:18:37Z

commit 29bff582b74ed0bdb7e6986482ad9e6799ea4d2f upstream. Fix the function name to avoid a kernel-doc warning: include/linux/serial_core.h:666: warning: expecting prototype for uart_port_lock_irqrestore(). Prototype was for uart_port_unlock_irqrestore() instead Fixes: b0af4bcb4946 ("serial: core: Provide port lock wrappers") Signed-off-by: Randy Dunlap Cc: Thomas Gleixner Cc: John Ogness Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman Cc: Jiri Slaby Reviewed-by: John Ogness Link: https://lore.kernel.org/r/20230927044128.4748-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman

ethernet: Add helper for assigning packet type when dest address does not match device address

2024-05-02T14:18:36Z

commit 6e159fd653d7ebf6290358e0330a0cb8a75cf73b upstream. Enable reuse of logic in eth_type_trans for determining packet type. Suggested-by: Sabrina Dubroca Cc: stable@vger.kernel.org Signed-off-by: Rahul Rameshbabu Reviewed-by: Sabrina Dubroca Link: https://lore.kernel.org/r/20240423181319.115860-3-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman