user/sven/linux.git/include/linux, branch v5.4.300

genirq: Provide new interfaces for affinity hints

2025-10-02T11:34:29Z

[ Upstream commit 65c7cdedeb3026fabcc967a7aae2f755ad4d0783 ] The discussion about removing the side effect of irq_set_affinity_hint() of actually applying the cpumask (if not NULL) as affinity to the interrupt, unearthed a few unpleasantries: 1) The modular perf drivers rely on the current behaviour for the very wrong reasons. 2) While none of the other drivers prevents user space from changing the affinity, a cursorily inspection shows that there are at least expectations in some drivers. #1 needs to be cleaned up anyway, so that's not a problem #2 might result in subtle regressions especially when irqbalanced (which nowadays ignores the affinity hint) is disabled. Provide new interfaces: irq_update_affinity_hint() - Only sets the affinity hint pointer irq_set_affinity_and_hint() - Set the pointer and apply the affinity to the interrupt Make irq_set_affinity_hint() a wrapper around irq_apply_affinity_hint() and document it to be phased out. Signed-off-by: Thomas Gleixner Signed-off-by: Nitesh Narayan Lal Signed-off-by: Thomas Gleixner Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20210501021832.743094-1-jesse.brandeburg@intel.com Link: https://lore.kernel.org/r/20210903152430.244937-2-nitesh@redhat.com Stable-dep-of: 915470e1b44e ("i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path") Signed-off-by: Sasha Levin

genirq: Export affinity setter for modules

2025-10-02T11:34:29Z

[ Upstream commit 4d80d6ca5d77fde9880da8466e5b64f250e5bf82 ] Perf modules abuse irq_set_affinity_hint() to set the affinity of system PMU interrupts just because irq_set_affinity() was not exported. The fact that irq_set_affinity_hint() actually sets the affinity is a non-documented side effect and the name is clearly saying it's a hint. To clean this up, export the real affinity setter. Signed-off-by: Thomas Gleixner Acked-by: Mark Rutland Link: https://lore.kernel.org/r/20210518093117.968251441@linutronix.de Stable-dep-of: 915470e1b44e ("i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path") Signed-off-by: Sasha Levin

genirq/affinity: Add irq_update_affinity_desc()

2025-10-02T11:34:29Z

[ Upstream commit 1d3aec89286254487df7641c30f1b14ad1d127a5 ] Add a function to allow the affinity of an interrupt be switched to managed, such that interrupts allocated for platform devices may be managed. This new interface has certain limitations, and attempts to use it in the following circumstances will fail: - For when the kernel is configured for generic IRQ reservation mode (in config GENERIC_IRQ_RESERVATION_MODE). The reason being that it could conflict with managed vs. non-managed interrupt accounting. - The interrupt is already started, which should not be the case during init - The interrupt is already configured as managed, which means double init Suggested-by: Thomas Gleixner Signed-off-by: John Garry Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/1606905417-183214-2-git-send-email-john.garry@huawei.com Stable-dep-of: 915470e1b44e ("i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path") Signed-off-by: Sasha Levin

atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control().

2025-09-04T12:05:54Z

[ Upstream commit ec79003c5f9d2c7f9576fc69b8dbda80305cbe3a ] syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 Modules linked in: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+1741b56d54536f4ec349@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68a6767c.050a0220.3d78fd.0011.GAE@google.com/ Tested-by: syzbot+1741b56d54536f4ec349@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20250821021901.2814721-1-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/atm: remove the atmdev_ops {get, set}sockopt methods

2025-09-04T12:05:54Z

[ Upstream commit a06d30ae7af492497ffbca6abf1621d508b8fcaa ] All implementations of these two methods are dummies that always return -EINVAL. Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller Stable-dep-of: ec79003c5f9d ("atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control().") Signed-off-by: Sasha Levin

nfs: fix UAF in direct writes

2025-08-28T14:21:37Z

commit 17f46b803d4f23c66cacce81db35fef3adb8f2af upstream. In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0x9c/0xe0 nfs_direct_write_schedule_work+0x237/0x250 [nfs] process_one_work+0x12f/0x4a0 worker_thread+0x14e/0x3b0 ? ZSTD_getCParams_internal+0x220/0x220 kthread+0xdc/0x120 ? __btf_name_valid+0xa0/0xa0 ret_from_fork+0x1f/0x30 This is because we're completing the nfs_direct_request twice in a row. The source of this is when we have our commit requests to submit, we process them and send them off, and then in the completion path for the commit requests we have if (nfs_commit_end(cinfo.mds)) nfs_direct_write_complete(dreq); However since we're submitting asynchronous requests we sometimes have one that completes before we submit the next one, so we end up calling complete on the nfs_direct_request twice. The only other place we use nfs_generic_commit_list() is in __nfs_commit_inode, which wraps this call in a nfs_commit_begin(); nfs_commit_end(); Which is a common pattern for this style of completion handling, one that is also repeated in the direct code with get_dreq()/put_dreq() calls around where we process events as well as in the completion paths. Fix this by using the same pattern for the commit requests. Before with my 200 node rocksdb stress running this warning would pop every 10ish minutes. With my patch the stress test has been running for several hours without popping. Signed-off-by: Josef Bacik Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust [ chanho : Backports v5.4.y, commit 133a48abf6ec (NFS: Fix up commit deadlocks) is needed to use nfs_commit_end ] Signed-off-by: Chanho Min Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

NFS: Fix up commit deadlocks

2025-08-28T14:21:37Z

commit 133a48abf6ecc535d7eddc6da1c3e4c972445882 upstream. If O_DIRECT bumps the commit_info rpcs_out field, then that could lead to fsync() hangs. The fix is to ensure that O_DIRECT calls nfs_commit_end(). Fixes: 723c921e7dfc ("sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API") Signed-off-by: Trond Myklebust Signed-off-by: Chanho Min Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mm: update memfd seal write check to include F_SEAL_WRITE

2025-08-28T14:21:36Z

[ Upstream commit 28464bbb2ddc199433383994bcb9600c8034afa1 ] The seal_check_future_write() function is called by shmem_mmap() or hugetlbfs_file_mmap() to disallow any future writable mappings of an memfd sealed this way. The F_SEAL_WRITE flag is not checked here, as that is handled via the mapping->i_mmap_writable mechanism and so any attempt at a mapping would fail before this could be run. However we intend to change this, meaning this check can be performed for F_SEAL_WRITE mappings also. The logic here is equally applicable to both flags, so update this function to accommodate both and rename it accordingly. Link: https://lkml.kernel.org/r/913628168ce6cce77df7d13a63970bae06a526e0.1697116581.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes Reviewed-by: Jan Kara Cc: Alexander Viro Cc: Andy Lutomirski Cc: Christian Brauner Cc: Hugh Dickins Cc: Matthew Wilcox (Oracle) Cc: Mike Kravetz Cc: Muchun Song Signed-off-by: Andrew Morton Cc: stable@vger.kernel.org Signed-off-by: Isaac J. Manjarres Signed-off-by: Greg Kroah-Hartman

mm: drop the assumption that VM_SHARED always implies writable

2025-08-28T14:21:36Z

[ Upstream commit e8e17ee90eaf650c855adb0a3e5e965fd6692ff1 ] Patch series "permit write-sealed memfd read-only shared mappings", v4. The man page for fcntl() describing memfd file seals states the following about F_SEAL_WRITE:- Furthermore, trying to create new shared, writable memory-mappings via mmap(2) will also fail with EPERM. With emphasis on 'writable'. In turns out in fact that currently the kernel simply disallows all new shared memory mappings for a memfd with F_SEAL_WRITE applied, rendering this documentation inaccurate. This matters because users are therefore unable to obtain a shared mapping to a memfd after write sealing altogether, which limits their usefulness. This was reported in the discussion thread [1] originating from a bug report [2]. This is a product of both using the struct address_space->i_mmap_writable atomic counter to determine whether writing may be permitted, and the kernel adjusting this counter when any VM_SHARED mapping is performed and more generally implicitly assuming VM_SHARED implies writable. It seems sensible that we should only update this mapping if VM_MAYWRITE is specified, i.e. whether it is possible that this mapping could at any point be written to. If we do so then all we need to do to permit write seals to function as documented is to clear VM_MAYWRITE when mapping read-only. It turns out this functionality already exists for F_SEAL_FUTURE_WRITE - we can therefore simply adapt this logic to do the same for F_SEAL_WRITE. We then hit a chicken and egg situation in mmap_region() where the check for VM_MAYWRITE occurs before we are able to clear this flag. To work around this, perform this check after we invoke call_mmap(), with careful consideration of error paths. Thanks to Andy Lutomirski for the suggestion! [1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/ [2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238 This patch (of 3): There is a general assumption that VMAs with the VM_SHARED flag set are writable. If the VM_MAYWRITE flag is not set, then this is simply not the case. Update those checks which affect the struct address_space->i_mmap_writable field to explicitly test for this by introducing [vma_]is_shared_maywrite() helper functions. This remains entirely conservative, as the lack of VM_MAYWRITE guarantees that the VMA cannot be written to. Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes Suggested-by: Andy Lutomirski Reviewed-by: Jan Kara Cc: Alexander Viro Cc: Christian Brauner Cc: Hugh Dickins Cc: Matthew Wilcox (Oracle) Cc: Mike Kravetz Cc: Muchun Song Signed-off-by: Andrew Morton Cc: stable@vger.kernel.org Signed-off-by: Isaac J. Manjarres Signed-off-by: Greg Kroah-Hartman

net: usbnet: Avoid potential RCU stall on LINK_CHANGE event

2025-08-28T14:21:33Z

commit 0d9cfc9b8cb17dbc29a98792d36ec39a1cf1395f upstream. The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link up and down events when the WWAN interface is activated on the modem-side. Interrupt URBs will in consecutive polls grab: * Link Connected * Link Disconnected * Link Connected Where the last Connected is then a stable link state. When the system is under load this may cause the unlink_urbs() work in __handle_link_change() to not complete before the next usbnet_link_change() call turns the carrier on again, allowing rx_submit() to queue new SKBs. In that event the URB queue is filled faster than it can drain, ending up in a RCU stall: rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/. rcu: blocking rcu_node structures (internal RCU debug): Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 Call trace: arch_local_irq_enable+0x4/0x8 local_bh_enable+0x18/0x20 __netdev_alloc_skb+0x18c/0x1cc rx_submit+0x68/0x1f8 [usbnet] rx_alloc_submit+0x4c/0x74 [usbnet] usbnet_bh+0x1d8/0x218 [usbnet] usbnet_bh_tasklet+0x10/0x18 [usbnet] tasklet_action_common+0xa8/0x110 tasklet_action+0x2c/0x34 handle_softirqs+0x2cc/0x3a0 __do_softirq+0x10/0x18 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 __irq_exit_rcu+0xa8/0xb8 irq_exit_rcu+0xc/0x30 el1_interrupt+0x34/0x48 el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x38/0x48 xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd] unlink1+0xd4/0xdc [usbcore] usb_hcd_unlink_urb+0x70/0xb0 [usbcore] usb_unlink_urb+0x24/0x44 [usbcore] unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet] __handle_link_change+0x34/0x70 [usbnet] usbnet_deferred_kevent+0x1c0/0x320 [usbnet] process_scheduled_works+0x2d0/0x48c worker_thread+0x150/0x1dc kthread+0xd8/0xe8 ret_from_fork+0x10/0x20 Get around the problem by delaying the carrier on to the scheduled work. This needs a new flag to keep track of the necessary action. The carrier ok check cannot be removed as it remains required for the LINK_RESET event flow. Fixes: 4b49f58fff00 ("usbnet: handle link change") Cc: stable@vger.kernel.org Signed-off-by: John Ernberg Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se Signed-off-by: Jakub Kicinski [ adjust context in header ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman