user/sven/linux.git/include/linux, branch v5.4.76

PM: runtime: Drop pm_runtime_clean_up_links()

2020-11-10T11:37:34Z

commit d6e36668598154820177bfd78c1621d8e6c580a2 upstream. After commit d12544fb2aa9 ("PM: runtime: Remove link state checks in rpm_get/put_supplier()") nothing prevents the consumer device's runtime PM from acquiring additional references to the supplier device after pm_runtime_clean_up_links() has run (or even while it is running), so calling this function from __device_release_driver() may be pointless (or even harmful). Moreover, it ignores stateless device links, so the runtime PM handling of managed and stateless device links is inconsistent because of it, so better get rid of it entirely. Fixes: d12544fb2aa9 ("PM: runtime: Remove link state checks in rpm_get/put_supplier()") Signed-off-by: Rafael J. Wysocki Cc: 5.1+ # 5.1+ Tested-by: Xiang Chen Reviewed-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

PM: runtime: Drop runtime PM references to supplier on link removal

2020-11-10T11:37:34Z

commit e0e398e204634db8fb71bd89cf2f6e3e5bd09b51 upstream. While removing a device link, drop the supplier device's runtime PM usage counter as many times as needed to drop all of the runtime PM references to it from the consumer in addition to dropping the consumer's link count. Fixes: baa8809f6097 ("PM / runtime: Optimize the use of device links") Signed-off-by: Rafael J. Wysocki Cc: 5.1+ # 5.1+ Tested-by: Xiang Chen Reviewed-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

mm: always have io_remap_pfn_range() set pgprot_decrypted()

2020-11-10T11:37:27Z

commit f8f6ae5d077a9bdaf5cbf2ac960a5d1a04b47482 upstream. The purpose of io_remap_pfn_range() is to map IO memory, such as a memory mapped IO exposed through a PCI BAR. IO devices do not understand encryption, so this memory must always be decrypted. Automatically call pgprot_decrypted() as part of the generic implementation. This fixes a bug where enabling AMD SME causes subsystems, such as RDMA, using io_remap_pfn_range() to expose BAR pages to user space to fail. The CPU will encrypt access to those BAR pages instead of passing unencrypted IO directly to the device. Places not mapping IO should use remap_pfn_range(). Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption") Signed-off-by: Jason Gunthorpe Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Tom Lendacky Cc: Thomas Gleixner Cc: Andrey Ryabinin Cc: Borislav Petkov Cc: Brijesh Singh Cc: Jonathan Corbet Cc: Dmitry Vyukov Cc: "Dave Young" Cc: Alexander Potapenko Cc: Konrad Rzeszutek Wilk Cc: Andy Lutomirski Cc: Larry Woodman Cc: Matt Fleming Cc: Ingo Molnar Cc: "Michael S. Tsirkin" Cc: Paolo Bonzini Cc: Peter Zijlstra Cc: Rik van Riel Cc: Toshimitsu Kani Cc: Link: https://lkml.kernel.org/r/0-v1-025d64bdf6c4+e-amd_sme_fix_jgg@nvidia.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

linkage: Introduce new macros for assembler symbols

2020-11-10T11:37:24Z

commit ffedeeb780dc554eff3d3b16e6a462a26a41d7ec upstream. Introduce new C macros for annotations of functions and data in assembly. There is a long-standing mess in macros like ENTRY, END, ENDPROC and similar. They are used in different manners and sometimes incorrectly. So introduce macros with clear use to annotate assembly as follows: a) Support macros for the ones below SYM_T_FUNC -- type used by assembler to mark functions SYM_T_OBJECT -- type used by assembler to mark data SYM_T_NONE -- type used by assembler to mark entries of unknown type They are defined as STT_FUNC, STT_OBJECT, and STT_NOTYPE respectively. According to the gas manual, this is the most portable way. I am not sure about other assemblers, so this can be switched back to %function and %object if this turns into a problem. Architectures can also override them by something like ", @function" if they need. SYM_A_ALIGN, SYM_A_NONE -- align the symbol? SYM_L_GLOBAL, SYM_L_WEAK, SYM_L_LOCAL -- linkage of symbols b) Mostly internal annotations, used by the ones below SYM_ENTRY -- use only if you have to (for non-paired symbols) SYM_START -- use only if you have to (for paired symbols) SYM_END -- use only if you have to (for paired symbols) c) Annotations for code SYM_INNER_LABEL_ALIGN -- only for labels in the middle of code SYM_INNER_LABEL -- only for labels in the middle of code SYM_FUNC_START_LOCAL_ALIAS -- use where there are two local names for one function SYM_FUNC_START_ALIAS -- use where there are two global names for one function SYM_FUNC_END_ALIAS -- the end of LOCAL_ALIASed or ALIASed function SYM_FUNC_START -- use for global functions SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment SYM_FUNC_START_LOCAL -- use for local functions SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o alignment SYM_FUNC_START_WEAK -- use for weak functions SYM_FUNC_START_WEAK_NOALIGN -- use for weak functions, w/o alignment SYM_FUNC_END -- the end of SYM_FUNC_START_LOCAL, SYM_FUNC_START, SYM_FUNC_START_WEAK, ... For functions with special (non-C) calling conventions: SYM_CODE_START -- use for non-C (special) functions SYM_CODE_START_NOALIGN -- use for non-C (special) functions, w/o alignment SYM_CODE_START_LOCAL -- use for local non-C (special) functions SYM_CODE_START_LOCAL_NOALIGN -- use for local non-C (special) functions, w/o alignment SYM_CODE_END -- the end of SYM_CODE_START_LOCAL or SYM_CODE_START d) For data SYM_DATA_START -- global data symbol SYM_DATA_START_LOCAL -- local data symbol SYM_DATA_END -- the end of the SYM_DATA_START symbol SYM_DATA_END_LABEL -- the labeled end of SYM_DATA_START symbol SYM_DATA -- start+end wrapper around simple global data SYM_DATA_LOCAL -- start+end wrapper around simple local data ========== The macros allow to pair starts and ends of functions and mark functions correctly in the output ELF objects. All users of the old macros in x86 are converted to use these in further patches. Signed-off-by: Jiri Slaby Signed-off-by: Borislav Petkov Acked-by: Rafael J. Wysocki Cc: Andrew Morton Cc: Andrey Ryabinin Cc: Boris Ostrovsky Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Jonathan Corbet Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Len Brown Cc: Linus Torvalds Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Mark Rutland Cc: Pavel Machek Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Cc: x86-ml Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20191011115108.12392-2-jslaby@suse.cz Cc: Jian Cai Signed-off-by: Greg Kroah-Hartman

hil/parisc: Disable HIL driver when it gets stuck

2020-11-05T10:43:36Z

commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream. When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller Cc: Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: During PR_SWAP, source caps should be sent only after tSwapSourceStart

2020-11-05T10:43:15Z

[ Upstream commit 6bbe2a90a0bb4af8dd99c3565e907fe9b5e7fd88 ] The patch addresses the compliance test failures while running TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 of the "Deterministic PD Compliance MOI" test plan published in https://www.usb.org/usbc. For a product to be Type-C compliant, it's expected that these tests are run on usb.org certified Type-C compliance tester as mentioned in https://www.usb.org/usbc. The purpose of the tests TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 is to verify the PR_SWAP response of the device. While doing so, the test asserts that Source Capabilities message is NOT received from the test device within tSwapSourceStart min (20 ms) from the time the last bit of GoodCRC corresponding to the RS_RDY message sent by the UUT was sent. If it does then the test fails. This is in line with the requirements from the USB Power Delivery Specification Revision 3.0, Version 1.2: "6.6.8.1 SwapSourceStartTimer The SwapSourceStartTimer Shall be used by the new Source, after a Power Role Swap or Fast Role Swap, to ensure that it does not send Source_Capabilities Message before the new Sink is ready to receive the Source_Capabilities Message. The new Source Shall Not send the Source_Capabilities Message earlier than tSwapSourceStart after the last bit of the EOP of GoodCRC Message sent in response to the PS_RDY Message sent by the new Source indicating that its power supply is ready." The patch makes sure that TCPM does not send the Source_Capabilities Message within tSwapSourceStart(20ms) by transitioning into SRC_STARTUP only after tSwapSourceStart(20ms). Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20200817183828.1895015-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

PM: runtime: Fix timer_expires data type on 32-bit arches

2020-11-01T11:01:06Z

commit 6b61d49a55796dbbc479eeb4465e59fd656c719c upstream. Commit 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers") switched PM runtime autosuspend to use hrtimers and all related time accounting in ns, but missed to update the timer_expires data type in struct dev_pm_info to u64. This causes the timer_expires value to be truncated on 32-bit architectures when assignment is done from u64 values: rpm_suspend() |- dev->power.timer_expires = expires; Fix it by changing the timer_expires type to u64. Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers") Signed-off-by: Grygorii Strashko Acked-by: Pavel Machek Acked-by: Vincent Guittot Cc: 5.0+ # 5.0+ [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

serial: qcom_geni_serial: To correct QUP Version detection logic

2020-11-01T11:01:06Z

commit c9ca43d42ed8d5fd635d327a664ed1d8579eb2af upstream. For QUP IP versions 2.5 and above the oversampling rate is halved from 32 to 16. Commit ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate") is pushed to handle this scenario. But the existing logic is failing to classify QUP Version 3.0 into the correct group ( 2.5 and above). As result Serial Engine clocks are not configured properly for baud rate and garbage data is sampled to FIFOs from the line. So, fix the logic to detect QUP with versions 2.5 and above. Fixes: ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate") Cc: stable Signed-off-by: Paras Sharma Reviewed-by: Akash Asthana Link: https://lore.kernel.org/r/1601445926-23673-1-git-send-email-parashar@codeaurora.org Signed-off-by: Greg Kroah-Hartman

mtd: lpddr: Fix bad logic in print_drs_error

2020-11-01T11:01:05Z

commit 1c9c02bb22684f6949d2e7ddc0a3ff364fd5a6fc upstream. Update logic for broken test. Use a more common logging style. It appears the logic in this function is broken for the consecutive tests of if (prog_status & 0x3) ... else if (prog_status & 0x2) ... else (prog_status & 0x1) ... Likely the first test should be if ((prog_status & 0x3) == 0x3) Found by inspection of include files using printk. Fixes: eb3db27507f7 ("[MTD] LPDDR PFOW definition") Cc: stable@vger.kernel.org Reported-by: Joe Perches Signed-off-by: Gustavo A. R. Silva Acked-by: Miquel Raynal Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/3fb0e29f5b601db8be2938a01d974b00c8788501.1588016644.git.gustavo@embeddedor.com Signed-off-by: Greg Kroah-Hartman

dmaengine: dw: Add DMA-channels mask cell support

2020-10-29T08:58:09Z

[ Upstream commit e8ee6c8cb61b676f1a2d6b942329e98224bd8ee9 ] DW DMA IP-core provides a way to synthesize the DMA controller with channels having different parameters like maximum burst-length, multi-block support, maximum data width, etc. Those parameters both explicitly and implicitly affect the channels performance. Since DMA slave devices might be very demanding to the DMA performance, let's provide a functionality for the slaves to be assigned with DW DMA channels, which performance according to the platform engineer fulfill their requirements. After this patch is applied it can be done by passing the mask of suitable DMA-channels either directly in the dw_dma_slave structure instance or as a fifth cell of the DMA DT-property. If mask is zero or not provided, then there is no limitation on the channels allocation. For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first two channels are synthesized with max burst length of 16, while the rest of the channels have been created with max-burst-len=4. It would seem that the first two channels must be faster than the others and should be more preferable for the time-critical DMA slave devices. In practice it turned out that the situation is quite the opposite. The channels with max-burst-len=4 demonstrated a better performance than the channels with max-burst-len=16 even when they both had been initialized with the same settings. The performance drop of the first two DMA-channels made them unsuitable for the DW APB SSI slave device. No matter what settings they are configured with, full-duplex SPI transfers occasionally experience the Rx FIFO overflow. It means that the DMA-engine doesn't keep up with incoming data pace even though the SPI-bus is enabled with speed of 25MHz while the DW DMA controller is clocked with 50MHz signal. There is no such problem has been noticed for the channels synthesized with max-burst-len=4. Signed-off-by: Serge Semin Link: https://lore.kernel.org/r/20200731200826.9292-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin