user/sven/linux.git/include/linux, branch v5.8.11

dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAX

2020-09-23T11:00:03Z

commit 88b67edd7247466bc47f01e1dc539b0d0d4b931e upstream. dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy implementation should be defined only in !CONFIG_DAX case, not in !CONFIG_FS_DAX case. Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support") Cc: Reported-by: Geert Uytterhoeven Reported-by: Naresh Kamboju Reported-by: kernel test robot Signed-off-by: Jan Kara Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

dm: Call proper helper to determine dax support

2020-09-23T11:00:03Z

commit e2ec5128254518cae320d5dc631b71b94160f663 upstream. DM was calling generic_fsdax_supported() to determine whether a device referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that they don't have to duplicate common generic checks. High level code should call dax_supported() helper which that calls into appropriate helper for the particular device. This problem manifested itself as kernel messages: dm-3: error: dax access failed (-95) when lvm2-testsuite run in cases where a DM device was stacked on top of another DM device. Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: Tested-by: Adrian Huang Signed-off-by: Jan Kara Acked-by: Mike Snitzer Reported-by: kernel test robot Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

arm64: paravirt: Initialize steal time when cpu is online

2020-09-23T11:00:02Z

commit 75df529bec9110dad43ab30e2d9490242529e8b8 upstream. Steal time initialization requires mapping a memory region which invokes a memory allocation. Doing this at CPU starting time results in the following trace when CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at mm/slab.h:498 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0-rc5+ #1 Call trace: dump_backtrace+0x0/0x208 show_stack+0x1c/0x28 dump_stack+0xc4/0x11c ___might_sleep+0xf8/0x130 __might_sleep+0x58/0x90 slab_pre_alloc_hook.constprop.101+0xd0/0x118 kmem_cache_alloc_node_trace+0x84/0x270 __get_vm_area_node+0x88/0x210 get_vm_area_caller+0x38/0x40 __ioremap_caller+0x70/0xf8 ioremap_cache+0x78/0xb0 memremap+0x9c/0x1a8 init_stolen_time_cpu+0x54/0xf0 cpuhp_invoke_callback+0xa8/0x720 notify_cpu_starting+0xc8/0xd8 secondary_start_kernel+0x114/0x180 CPU1: Booted secondary processor 0x0000000001 [0x431f0a11] However we don't need to initialize steal time at CPU starting time. We can simply wait until CPU online time, just sacrificing a bit of accuracy by returning zero for steal time until we know better. While at it, add __init to the functions that are only called by pv_time_init() which is __init. Signed-off-by: Andrew Jones Fixes: e0685fa228fd ("arm64: Retrieve stolen time as paravirtualized guest") Cc: stable@vger.kernel.org Reviewed-by: Steven Price Link: https://lore.kernel.org/r/20200916154530.40809-1-drjones@redhat.com Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman

serial: core: fix console port-lock regression

2020-09-23T11:00:01Z

commit e0830dbf71f191851ed3772d2760f007b7c5bc3a upstream. Fix the port-lock initialisation regression introduced by commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") by making sure that the lock is again initialised during console setup. The console may be registered before the serial controller has been probed in which case the port lock needs to be initialised during console setup by a call to uart_set_options(). The console-detach changes introduced a regression in several drivers by effectively removing that initialisation by not initialising the lock when the port is used as a console (which is always the case during console setup). Add back the early lock initialisation and instead use a new console-reinit flag to handle the case where a console is being re-attached through sysfs. The question whether the console-detach interface should have been added in the first place is left for another discussion. Note that the console-enabled check in uart_set_options() is not redundant because of kgdboc, which can end up reinitialising an already enabled console (see commit 42b6a1baa3ec ("serial_core: Don't re-initialize a previously initialized spinlock.")). Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable # 5.7 Signed-off-by: Johan Hovold Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count

2020-09-23T10:59:58Z

[ Upstream commit e6b1a44eccfcab5e5e280be376f65478c3b2c7a2 ] The __this_cpu*() accessors are (in general) IRQ-unsafe which, given that percpu-rwsem is a blocking primitive, should be just fine. However, file_end_write() is used from IRQ context and will cause load-store issues on architectures where the per-cpu accessors are not natively irq-safe. Fix it by using the IRQ-safe this_cpu_*() for operations on read_count. This will generate more expensive code on a number of platforms, which might cause a performance regression for some of the other percpu-rwsem users. If any such is reported, we can consider alternative solutions. Fixes: 70fe2f48152e ("aio: fix freeze protection of aio writes") Signed-off-by: Hou Tao Signed-off-by: Peter Zijlstra (Intel) Acked-by: Will Deacon Acked-by: Oleg Nesterov Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com Signed-off-by: Sasha Levin

i2c: algo: pca: Reapply i2c bus settings after reset

2020-09-23T10:59:52Z

[ Upstream commit 0a355aeb24081e4538d4d424cd189f16c0bbd983 ] If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip. Signed-off-by: Evan Nimmo Reviewed-by: Chris Packham Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

test_firmware: Test platform fw loading on non-EFI systems

2020-09-17T11:55:45Z

commit baaabecfc80fad255f866563b53b8c7a3eec176e upstream. On non-EFI systems, it wasn't possible to test the platform firmware loader because it will have never set "checked_fw" during __init. Instead, allow the test code to override this check. Additionally split the declarations into a private symbol namespace so there is greater enforcement of the symbol visibility. Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Acked-by: Ard Biesheuvel Link: https://lore.kernel.org/r/20200909225354.3118328-1-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman

netfilter: conntrack: allow sctp hearbeat after connection re-use

2020-09-17T11:55:32Z

[ Upstream commit cc5453a5b7e90c39f713091a7ebc53c1f87d1700 ] If an sctp connection gets re-used, heartbeats are flagged as invalid because their vtag doesn't match. Handle this in a similar way as TCP conntrack when it suspects that the endpoints and conntrack are out-of-sync. When a HEARTBEAT request fails its vtag validation, flag this in the conntrack state and accept the packet. When a HEARTBEAT_ACK is received with an invalid vtag in the reverse direction after we allowed such a HEARTBEAT through, assume we are out-of-sync and re-set the vtag info. v2: remove left-over snippet from an older incarnation that moved new_state/old_state assignments, thats not needed so keep that as-is. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks

2020-09-09T17:14:30Z

commit 3b5455636fe26ea21b4189d135a424a6da016418 upstream. All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo Cc: Karthik Shivaram Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

block: allow for_each_bvec to support zero len bvec

2020-09-09T17:14:29Z

commit 7e24969022cbd61ddc586f14824fc205661bb124 upstream. Block layer usually doesn't support or allow zero-length bvec. Since commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()"), iterate_bvec() switches to bvec iterator. However, Al mentioned that 'Zero-length segments are not disallowed' in iov_iter. Fixes for_each_bvec() so that it can move on after seeing one zero length bvec. Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()") Reported-by: syzbot Signed-off-by: Ming Lei Tested-by: Tetsuo Handa Cc: Al Viro Cc: Matthew Wilcox Cc: Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman