user/sven/linux.git/include/linux, branch v6.1.23

block/io_uring: pass in issue_flags for uring_cmd task_work handling

2023-04-06T10:10:51Z

commit 9d2789ac9d60c049d26ef6d3005d9c94c5a559e9 upstream. io_uring_cmd_done() currently assumes that the uring_lock is held when invoked, and while it generally is, this is not guaranteed. Pass in the issue_flags associated with it, so that we have IO_URING_F_UNLOCKED available to be able to lock the CQ ring appropriately when completing events. Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

lockd: set file_lock start and end when decoding nlm4 testargs

2023-03-30T10:49:23Z

commit 7ff84910c66c9144cc0de9d9deed9fb84c03aff0 upstream. Commit 6930bcbfb6ce dropped the setting of the file_lock range when decoding a nlm_lock off the wire. This causes the client side grant callback to miss matching blocks and reject the lock, only to rerequest it 30s later. Add a helper function to set the file_lock range from the start and end values that the protocol uses, and have the nlm_lock decoder call that to set up the file_lock args properly. Fixes: 6930bcbfb6ce ("lockd: detect and reject lock arguments that overflow") Reported-by: Amir Goldstein Signed-off-by: Jeff Layton Tested-by: Amir Goldstein Cc: stable@vger.kernel.org #6.0 Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman

efi: sysfb_efi: Fix DMI quirks not working for simpledrm

2023-03-30T10:49:22Z

commit 3615c78673c332b69aaacefbcde5937c5c706686 upstream. Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init() from before the [sysfb_]parse_mode() call to after it. But sysfb_apply_efi_quirks() modifies the global screen_info struct which [sysfb_]parse_mode() parses, so doing it later is too late. This has broken all DMI based quirks for correcting wrong firmware efifb settings when simpledrm is used. To fix this move the sysfb_apply_efi_quirks() call back to its old place and split the new setup of the efifb_fwnode (which requires the platform_device) into its own function and call that at the place of the moved sysfb_apply_efi_quirks(pd) calls. Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches") Cc: stable@vger.kernel.org Cc: Javier Martinez Canillas Cc: Thomas Zimmermann Signed-off-by: Hans de Goede Reviewed-by: Javier Martinez Canillas Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman

entry: Fix noinstr warning in __enter_from_user_mode()

2023-03-30T10:49:13Z

[ Upstream commit f87d28673b71b35b248231a2086f9404afbb7f28 ] __enter_from_user_mode() is triggering noinstr warnings with CONFIG_DEBUG_PREEMPT due to its call of preempt_count_add() via ct_state(). The preemption disable isn't needed as interrupts are already disabled. And the context_tracking_enabled() check in ct_state() also isn't needed as that's already being done by the CT_WARN_ON(). Just use __ct_state() instead. Fixes the following warnings: vmlinux.o: warning: objtool: enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0xf9: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0xc7: call to preempt_count_add() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section Fixes: 171476775d32 ("context_tracking: Convert state to atomic_t") Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/d8955fa6d68dc955dda19baf13ae014ae27926f5.1677369694.git.jpoimboe@kernel.org Signed-off-by: Sasha Levin

nvme-tcp: fix nvme_tcp_term_pdu to match spec

2023-03-30T10:49:09Z

[ Upstream commit aa01c67de5926fdb276793180564f172c55fb0d7 ] The FEI field of C2HTermReq/H2CTermReq is 4 bytes but not 4-byte-aligned in the NVMe/TCP specification (it is located at offset 10 in the PDU). Split it into two 16-bit integers in struct nvme_tcp_term_pdu so no padding is inserted. There should also be 10 reserved bytes after. There are currently no users of this type. Fixes: fc221d05447aa6db ("nvme-tcp: Add protocol header") Reported-by: Geert Uytterhoeven Signed-off-by: Caleb Sander Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

net: stmmac: Fix for mismatched host/device DMA address width

2023-03-30T10:49:05Z

[ Upstream commit 070246e4674b125860d311c18ce2623e73e2bd51 ] Currently DMA address width is either read from a RO device register or force set from the platform data. This breaks DMA when the host DMA address width is <=32it but the device is >32bit. Right now the driver may decide to use a 2nd DMA descriptor for another buffer (happens in case of TSO xmit) assuming that 32bit addressing is used due to platform configuration but the device will still use both descriptor addresses as one address. This can be observed with the Intel EHL platform driver that sets 32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in case of TCP with iptables NAT configuration on TSO packets. The logic should be like this: Whatever we do on the host side (memory allocation GFP flags) should happen with the host DMA width, whenever we decide how to set addresses on the device registers we must use the device DMA address width. This patch renames the platform address width field from addr64 (term used in device datasheet) to host_addr and uses this value exclusively for host side operations while all chip operations consider the device DMA width as read from the device register. Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing") Signed-off-by: Jochen Henneberg Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: mdio: fix owner field for mdio buses registered using ACPI

2023-03-30T10:49:05Z

[ Upstream commit 30b605b8501e321f79e19c3238aa6ca31da6087c ] Bus ownership is wrong when using acpi_mdiobus_register() to register an mdio bus. That function is not inline, so when it calls mdiobus_register() the wrong THIS_MODULE value is captured. CC: Maxime Bizon Fixes: 803ca24d2f92 ("net: mdio: Add ACPI support code for mdio") Signed-off-by: Florian Fainelli Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: mdio: fix owner field for mdio buses registered using device-tree

2023-03-30T10:49:05Z

[ Upstream commit 99669259f3361d759219811e670b7e0742668556 ] Bus ownership is wrong when using of_mdiobus_register() to register an mdio bus. That function is not inline, so when it calls mdiobus_register() the wrong THIS_MODULE value is captured. Signed-off-by: Maxime Bizon Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") [florian: fix kdoc, added Fixes tag] Signed-off-by: Florian Fainelli Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

fbdev: Fix incorrect page mapping clearance at fb_deferred_io_release()

2023-03-22T12:34:04Z

commit fe9ae05cfbe587dda724fcf537c00bc2f287da62 upstream. The recent fix for the deferred I/O by the commit 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices") caused a regression when the same fb device is opened/closed while it's being used. It resulted in a frozen screen even if something is redrawn there after the close. The breakage is because the patch was made under a wrong assumption of a single open; in the current code, fb_deferred_io_release() cleans up the page mapping of the pageref list and it calls cancel_delayed_work_sync() unconditionally, where both are no correct behavior for multiple opens. This patch adds a refcount for the opens of the device, and applies the cleanup only when all files get closed. As both fb_deferred_io_open() and _close() are called always in the fb_info lock (mutex), it's safe to use the normal int for the refcounting. Also, a useless BUG_ON() is dropped. Fixes: 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices") Cc: Signed-off-by: Takashi Iwai Reviewed-by: Patrik Jakobsson Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman

tracing: Make tracepoint lockdep check actually test something

2023-03-22T12:33:59Z

commit c2679254b9c9980d9045f0f722cf093a2b1f7590 upstream. A while ago where the trace events had the following: rcu_read_lock_sched_notrace(); rcu_dereference_sched(...); rcu_read_unlock_sched_notrace(); If the tracepoint is enabled, it could trigger RCU issues if called in the wrong place. And this warning was only triggered if lockdep was enabled. If the tracepoint was never enabled with lockdep, the bug would not be caught. To handle this, the above sequence was done when lockdep was enabled regardless if the tracepoint was enabled or not (although the always enabled code really didn't do anything, it would still trigger a warning). But a lot has changed since that lockdep code was added. One is, that sequence no longer triggers any warning. Another is, the tracepoint when enabled doesn't even do that sequence anymore. The main check we care about today is whether RCU is "watching" or not. So if lockdep is enabled, always check if rcu_is_watching() which will trigger a warning if it is not (tracepoints require RCU to be watching). Note, that old sequence did add a bit of overhead when lockdep was enabled, and with the latest kernel updates, would cause the system to slow down enough to trigger kernel "stalled" warnings. Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Dave Hansen Cc: "Paul E. McKenney" Cc: Mathieu Desnoyers Cc: Joel Fernandes Acked-by: Peter Zijlstra (Intel) Acked-by: Paul E. McKenney Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman