user/sven/linux.git/include/linux, branch v6.1.56

ata: libata-sata: increase PMP SRST timeout to 10s

2023-10-06T12:57:05Z

commit 753a4d531bc518633ea88ac0ed02b25a16823d51 upstream. On certain SATA controllers, softreset fails after wakeup from S2RAM with the message "softreset failed (1st FIS failed)", sometimes resulting in drives not being detected again. With the increased timeout, this issue is avoided. Instead, "softreset failed (device not ready)" is now logged 1-2 times; this later failure seems to cause fewer problems however, and the drives are detected reliably once they've spun up and the probe is retried. The issue was observed with the primary SATA controller of the QNAP TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU, and the following drives: - Seagate IronWolf ST12000VN0008 - Seagate IronWolf ST8000NE0004 The SATA controller seems to be more relevant to this issue than the drives, as the same drives are always detected reliably on the secondary SATA controller on the same board (an ASMedia 106x) without any "softreset failed" errors even without the increased timeout. Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s") Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

bpf: Fix BTF_ID symbol generation collision

2023-10-06T12:57:04Z

commit 8f908db77782630c45ba29dac35c434b5ce0b730 upstream. Marcus and Satya reported an issue where BTF_ID macro generates same symbol in separate objects and that breaks final vmlinux link. ld.lld: error: ld-temp.o :14577:1: symbol '__BTF_ID__struct__cgroup__624' is already defined This can be triggered under specific configs when __COUNTER__ happens to be the same for the same symbol in two different translation units, which is already quite unlikely to happen. Add __LINE__ number suffix to make BTF_ID symbol more unique, which is not a complete fix, but it would help for now and meanwhile we can work on better solution as suggested by Andrii. Cc: stable@vger.kernel.org Reported-by: Satya Durga Srinivasu Prabhala Reported-by: Marcus Seyfarth Closes: https://github.com/ClangBuiltLinux/linux/issues/1913 Debugged-by: Nathan Chancellor Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/ Signed-off-by: Jiri Olsa Signed-off-by: Nick Desaulniers Reviewed-by: Nathan Chancellor Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-1-263fc519c21f@google.com Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman

mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement

2023-10-06T12:57:03Z

commit 9ea9cb00a82b53ec39630eac718776d37e41b35a upstream. Breno and Josef report a deadlock scenario from cgroup reclaim re-entering the filesystem: [ 361.546690] ====================================================== [ 361.559210] WARNING: possible circular locking dependency detected [ 361.571703] 6.5.0-0_fbk700_debug_rc0_kbuilder_13159_gbf787a128001 #1 Tainted: G S E [ 361.589704] ------------------------------------------------------ [ 361.602277] find/9315 is trying to acquire lock: [ 361.611625] ffff88837ba140c0 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0x68/0x4f0 [ 361.631437] [ 361.631437] but task is already holding lock: [ 361.643243] ffff8881765b8678 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock+0x1e/0x40 [ 362.904457] mutex_lock_nested+0x1c/0x30 [ 362.912414] __btrfs_release_delayed_node+0x68/0x4f0 [ 362.922460] btrfs_evict_inode+0x301/0x770 [ 362.982726] evict+0x17c/0x380 [ 362.988944] prune_icache_sb+0x100/0x1d0 [ 363.005559] super_cache_scan+0x1f8/0x260 [ 363.013695] do_shrink_slab+0x2a2/0x540 [ 363.021489] shrink_slab_memcg+0x237/0x3d0 [ 363.050606] shrink_slab+0xa7/0x240 [ 363.083382] shrink_node_memcgs+0x262/0x3b0 [ 363.091870] shrink_node+0x1a4/0x720 [ 363.099150] shrink_zones+0x1f6/0x5d0 [ 363.148798] do_try_to_free_pages+0x19b/0x5e0 [ 363.157633] try_to_free_mem_cgroup_pages+0x266/0x370 [ 363.190575] reclaim_high+0x16f/0x1f0 [ 363.208409] mem_cgroup_handle_over_high+0x10b/0x270 [ 363.246678] try_charge_memcg+0xaf2/0xc70 [ 363.304151] charge_memcg+0xf0/0x350 [ 363.320070] __mem_cgroup_charge+0x28/0x40 [ 363.328371] __filemap_add_folio+0x870/0xd50 [ 363.371303] filemap_add_folio+0xdd/0x310 [ 363.399696] __filemap_get_folio+0x2fc/0x7d0 [ 363.419086] pagecache_get_page+0xe/0x30 [ 363.427048] alloc_extent_buffer+0x1cd/0x6a0 [ 363.435704] read_tree_block+0x43/0xc0 [ 363.443316] read_block_for_search+0x361/0x510 [ 363.466690] btrfs_search_slot+0xc8c/0x1520 This is caused by the mem_cgroup_handle_over_high() not respecting the gfp_mask of the allocation context. We used to only call this function on resume to userspace, where no locks were held. But c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges") added a call from the allocation context without considering the gfp. Link: https://lkml.kernel.org/r/20230914152139.100822-1-hannes@cmpxchg.org Fixes: c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges") Signed-off-by: Johannes Weiner Reported-by: Breno Leitao Reported-by: Josef Bacik Acked-by: Shakeel Butt Acked-by: Michal Hocko Cc: Roman Gushchin Cc: Muchun Song Cc: [5.17+] Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

timers: Tag (hr)timer softirq as hotplug safe

2023-10-06T12:57:03Z

commit 1a6a464774947920dcedcf7409be62495c7cedd0 upstream. Specific stress involving frequent CPU-hotplug operations, such as running rcutorture for example, may trigger the following message: NOHZ tick-stop error: local softirq work is pending, handler #02!!!" This happens in the CPU-down hotplug process, after CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this fragile intermediate state, softirqs waiting for threaded handling may be forever ignored and eventually reported by the idle task as in the above example. However some vectors are known to be safe as long as the corresponding subsystems have teardown callbacks handling the migration of their events. The above error message reports pending timers softirq although this vector can be considered as hotplug safe because the CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration of timers after the death of the CPU. Hrtimers also have a similar hotplug handling. Therefore this error message, as far as (hr-)timers are concerned, can be considered spurious and the relevant softirq vectors can be marked as hotplug safe. Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Frederic Weisbecker Signed-off-by: Thomas Gleixner Reviewed-by: Joel Fernandes (Google) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman

ata: libata-scsi: link ata port and scsi device

2023-10-06T12:57:01Z

commit fb99ef17865035a6657786d4b2af11a27ba23f9b upstream. There is no direct device ancestry defined between an ata_device and its scsi device which prevents the power management code from correctly ordering suspend and resume operations. Create such ancestry with the ata device as the parent to ensure that the scsi device (child) is suspended before the ata device and that resume handles the ata device before the scsi device. The parent-child (supplier-consumer) relationship is established between the ata_port (parent) and the scsi device (child) with the function device_add_link(). The parent used is not the ata_device as the PM operations are defined per port and the status of all devices connected through that port is controlled from the port operations. The device link is established with the new function ata_scsi_slave_alloc(), and this function is used to define the ->slave_alloc callback of the scsi host template of all ata drivers. Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Niklas Cassel Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Reviewed-by: John Garry Signed-off-by: Greg Kroah-Hartman

bpf: Annotate bpf_long_memcpy with data_race

2023-10-06T12:56:50Z

[ Upstream commit 6a86b5b5cd76d2734304a0173f5f01aa8aa2025e ] syzbot reported a data race splat between two processes trying to update the same BPF map value via syscall on different CPUs: BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xfffffff000002788 The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size and forced to use long read/writes to try to atomically copy long counters. It is best-effort only and no barriers are here since it _will_ race with concurrent updates from BPF programs. The bpf_long_memcpy() is called from bpf(2) syscall. Marco suggested that the best way to make this known to KCSAN would be to use data_race() annotation. Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com Suggested-by: Marco Elver Signed-off-by: Daniel Borkmann Acked-by: Marco Elver Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net Signed-off-by: Sasha Levin

locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested()

2023-10-06T12:56:41Z

[ Upstream commit 41b43b6c6e30a832c790b010a06772e793bca193 ] It was brought up by Tetsuo that the following sequence: write_seqlock_irqsave() printk_deferred_enter() could lead to a deadlock if the lockdep annotation within write_seqlock_irqsave() triggers. The problem is that the sequence counter is incremented before the lockdep annotation is performed. The lockdep splat would then attempt to invoke printk() but the reader side, of the same seqcount, could have a tty_port::lock acquired waiting for the sequence number to become even again. The other lockdep annotations come before the actual locking because "we want to see the locking error before it happens". There is no reason why seqcount should be different here. Do the lockdep annotation first then perform the locking operation (the sequence increment). Fixes: 1ca7d67cf5d5a ("seqcount: Add lockdep functionality to seqcount/seqlock structures") Reported-by: Tetsuo Handa Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Ingo Molnar Link: https://lore.kernel.org/r/20230920104627._DTHgPyA@linutronix.de Closes: https://lore.kernel.org/20230621130641.-5iueY1I@linutronix.de Signed-off-by: Sasha Levin

team: fix null-ptr-deref when team device type is changed

2023-10-06T12:56:41Z

[ Upstream commit 492032760127251e5540a5716a70996bacf2a3fd ] Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug. Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Suggested-by: Hangbin Liu Reviewed-by: Hangbin Liu Signed-off-by: Ziyang Xuan Reviewed-by: Jiri Pirko Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

NFSv4.1: fix pnfs MDS=DS session trunking

2023-10-06T12:56:31Z

[ Upstream commit 806a3bc421a115fbb287c1efce63a48c54ee804b ] Currently, when GETDEVICEINFO returns multiple locations where each is a different IP but the server's identity is same as MDS, then nfs4_set_ds_client() finds the existing nfs_client structure which has the MDS's max_connect value (and if it's 1), then the 1st IP on the DS's list will get dropped due to MDS trunking rules. Other IPs would be added as they fall under the pnfs trunking rules. For the list of IPs the 1st goes thru calling nfs4_set_ds_client() which will eventually call nfs4_add_trunk() and call into rpc_clnt_test_and_add_xprt() which has the check for MDS trunking. The other IPs (after the 1st one), would call rpc_clnt_add_xprt() which doesn't go thru that check. nfs4_add_trunk() is called when MDS trunking is happening and it needs to enforce the usage of max_connect mount option of the 1st mount. However, this shouldn't be applied to pnfs flow. Instead, this patch proposed to treat MDS=DS as DS trunking and make sure that MDS's max_connect limit does not apply to the 1st IP returned in the GETDEVICEINFO list. It does so by marking the newly created client with a new flag NFS_CS_PNFS which then used to pass max_connect value to use into the rpc_clnt_test_and_add_xprt() instead of the existing rpc client's max_connect value set by the MDS connection. For example, mount was done without max_connect value set so MDS's rpc client has cl_max_connect=1. Upon calling into rpc_clnt_test_and_add_xprt() and using rpc client's value, the caller passes in max_connect value which is previously been set in the pnfs path (as a part of handling GETDEVICEINFO list of IPs) in nfs4_set_ds_client(). However, when NFS_CS_PNFS flag is not set and we know we are doing MDS trunking, comparing a new IP of the same server, we then set the max_connect value to the existing MDS's value and pass that into rpc_clnt_test_and_add_xprt(). Fixes: dc48e0abee24 ("SUNRPC enforce creation of no more than max_connect xprts") Signed-off-by: Olga Kornievskaia Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin

NFS: Use the correct commit info in nfs_join_page_group()

2023-10-06T12:56:31Z

[ Upstream commit b193a78ddb5ee7dba074d3f28dc050069ba083c0 ] Ensure that nfs_clear_request_commit() updates the correct counters when it removes them from the commit list. Fixes: ed5d588fe47f ("NFS: Try to join page groups before an O_DIRECT retransmission") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin