user/sven/linux.git/include/linux, branch v6.13.1

Revert "libfs: Add simple_offset_empty()"

2025-02-01T16:21:22Z

commit d7bde4f27ceef3dc6d72010a20d4da23db835a32 upstream. simple_empty() and simple_offset_empty() perform the same task. The latter's use as a canary to find bugs has not found any new issues. A subsequent patch will remove the use of the mtree for iterating directory contents, so revert back to using a similar mechanism for determining whether a directory is indeed empty. Only one such mechanism is ever needed. Signed-off-by: Chuck Lever Link: https://lore.kernel.org/r/20241228175522.1854234-3-cel@kernel.org Reviewed-by: Yang Erkun Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman

Merge tag 'timers_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-01-19T17:09:07Z

Pull timer fixes from Borislav Petkov: - Reset hrtimers correctly when a CPU hotplug state traversal happens "half-ways" and leaves hrtimers not (re-)initialized properly - Annotate accesses to a timer group's ignore flag to prevent KCSAN from raising data_race warnings - Make sure timer group initialization is visible to timer tree walkers and avoid a hypothetical race - Fix another race between CPU hotplug and idle entry/exit where timers on a fully idle system are getting ignored - Fix a case where an ignored signal is still being handled which it shouldn't be * tag 'timers_urgent_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimers: Handle CPU state correctly on hotplug timers/migration: Annotate accesses to ignore flag timers/migration: Enforce group initialization visibility to tree walkers timers/migration: Fix another race between hotplug and idle entry/exit signal/posixtimers: Handle ignore/blocked sequences correctly

Merge tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-01-17T22:49:53Z

Pull SoC fixes from Arnd Bergmann: "Two last minute fixes: one build issue on TI soc drivers, and a regression in the renesas reset controller driver" * tag 'soc-fixes-6.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: ti: pruss: Fix pruss APIs reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device

hrtimers: Handle CPU state correctly on hotplug

2025-01-16T12:06:14Z

Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to CPUHP_ONLINE: Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set to 1 throughout. However, during a CPU unplug operation, the tick and the clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online state, for instance CFS incorrectly assumes that the hrtick is already active, and the chance of the clockevent device to transition to oneshot mode is also lost forever for the CPU, unless it goes back to a lower state than CPUHP_HRTIMERS_PREPARE once. This round-trip reveals another issue; cpu_base.online is not set to 1 after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer(). Aside of that, the bulk of the per CPU state is not reset either, which means there are dangling pointers in the worst case. Address this by adding a corresponding startup() callback, which resets the stale per CPU state and sets the online flag. [ tglx: Make the new callback unconditionally available, remove the online modification in the prepare() callback and clear the remaining state in the starting callback instead of the prepare callback ] Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Signed-off-by: Koichiro Den Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com

Merge tag 'ti-driver-soc-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes

2025-01-15T14:56:24Z

TI SoC driver updates for v6.14 - Build fixup when CONFIG_TI_PRUSS is disabled.

Merge tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2025-01-14T22:10:17Z

Pull seccomp fix from Kees Cook: "Fix a randconfig failure: - Unconditionally define stub for !CONFIG_SECCOMP (Linus Walleij)" * tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Stub for !CONFIG_SECCOMP

Merge tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2025-01-13T17:03:18Z

Pull misc fixes from Andrew Morton: "18 hotfixes. 11 are cc:stable. 13 are MM and 5 are non-MM. All patches are singletons - please see the relevant changelogs for details" * tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: fs/proc: fix softlockup in __read_vmcore (part 2) mm: fix assertion in folio_end_read() mm: vmscan : pgdemote vmstat is not getting updated when MGLRU is enabled. vmstat: disable vmstat_work on vmstat_cpu_down_prep() zram: fix potential UAF of zram table selftests/mm: set allocated memory to non-zero content in cow test mm: clear uffd-wp PTE/PMD state on mremap() module: fix writing of livepatch relocations in ROX text mm: zswap: properly synchronize freeing resources during CPU hotunplug Revert "mm: zswap: fix race between [de]compression and CPU hotunplug" hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode mm: fix div by zero in bdi_ratio_from_pages x86/execmem: fix ROX cache usage in Xen PV guests filemap: avoid truncating 64-bit offset to 32 bits tools: fix atomic_set() definition to set the value correctly mm/mempolicy: count MPOL_WEIGHTED_INTERLEAVE to "interleave_hit" scripts/decode_stacktrace.sh: fix decoding of lines with an additional info mm/kmemleak: fix percpu memory leak detection failure

mm: clear uffd-wp PTE/PMD state on mremap()

2025-01-13T03:03:37Z

When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. Link: https://lkml.kernel.org/r/20250107144755.1871363-2-ryan.roberts@arm.com Co-developed-by: Mikołaj Lenczewski Signed-off-by: Mikołaj Lenczewski Signed-off-by: Ryan Roberts Closes: https://lore.kernel.org/linux-mm/810b44a8-d2ae-4107-b665-5a42eae2d948@arm.com/ Fixes: 63b2d4174c4a ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl") Cc: David Hildenbrand Cc: Jann Horn Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Mark Rutland Cc: Muchun Song Cc: Peter Xu Cc: Shuah Khan Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton

module: fix writing of livepatch relocations in ROX text

2025-01-13T03:03:37Z

A livepatch module can contain a special relocation section .klp.rela.. to apply its relocations at the appropriate time and to additionally access local and unexported symbols. When points to another module, such relocations are processed separately from the regular module relocation process. For instance, only when the target actually becomes loaded. With CONFIG_STRICT_MODULE_RWX, when the livepatch core decides to apply these relocations, their processing results in the following bug: [ 25.827238] BUG: unable to handle page fault for address: 00000000000012ba [ 25.827819] #PF: supervisor read access in kernel mode [ 25.828153] #PF: error_code(0x0000) - not-present page [ 25.828588] PGD 0 P4D 0 [ 25.829063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ 25.829742] CPU: 2 UID: 0 PID: 452 Comm: insmod Tainted: G O K 6.13.0-rc4-00078-g059dd502b263 #7820 [ 25.830417] Tainted: [O]=OOT_MODULE, [K]=LIVEPATCH [ 25.830768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 25.831651] RIP: 0010:memcmp+0x24/0x60 [ 25.832190] Code: [...] [ 25.833378] RSP: 0018:ffffa40b403a3ae8 EFLAGS: 00000246 [ 25.833637] RAX: 0000000000000000 RBX: ffff93bc81d8e700 RCX: ffffffffc0202000 [ 25.834072] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 00000000000012ba [ 25.834548] RBP: ffffa40b403a3b68 R08: ffffa40b403a3b30 R09: 0000004a00000002 [ 25.835088] R10: ffffffffffffd222 R11: f000000000000000 R12: 0000000000000000 [ 25.835666] R13: ffffffffc02032ba R14: ffffffffc007d1e0 R15: 0000000000000004 [ 25.836139] FS: 00007fecef8c3080(0000) GS:ffff93bc8f900000(0000) knlGS:0000000000000000 [ 25.836519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.836977] CR2: 00000000000012ba CR3: 0000000002f24000 CR4: 00000000000006f0 [ 25.837442] Call Trace: [ 25.838297] [ 25.841083] __write_relocate_add.constprop.0+0xc7/0x2b0 [ 25.841701] apply_relocate_add+0x75/0xa0 [ 25.841973] klp_write_section_relocs+0x10e/0x140 [ 25.842304] klp_write_object_relocs+0x70/0xa0 [ 25.842682] klp_init_object_loaded+0x21/0xf0 [ 25.842972] klp_enable_patch+0x43d/0x900 [ 25.843572] do_one_initcall+0x4c/0x220 [ 25.844186] do_init_module+0x6a/0x260 [ 25.844423] init_module_from_file+0x9c/0xe0 [ 25.844702] idempotent_init_module+0x172/0x270 [ 25.845008] __x64_sys_finit_module+0x69/0xc0 [ 25.845253] do_syscall_64+0x9e/0x1a0 [ 25.845498] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 25.846056] RIP: 0033:0x7fecef9eb25d [ 25.846444] Code: [...] [ 25.847563] RSP: 002b:00007ffd0c5d6de8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 25.848082] RAX: ffffffffffffffda RBX: 000055b03f05e470 RCX: 00007fecef9eb25d [ 25.848456] RDX: 0000000000000000 RSI: 000055b001e74e52 RDI: 0000000000000003 [ 25.848969] RBP: 00007ffd0c5d6ea0 R08: 0000000000000040 R09: 0000000000004100 [ 25.849411] R10: 00007fecefac7b20 R11: 0000000000000246 R12: 000055b001e74e52 [ 25.849905] R13: 0000000000000000 R14: 000055b03f05e440 R15: 0000000000000000 [ 25.850336] [ 25.850553] Modules linked in: deku(OK+) uinput [ 25.851408] CR2: 00000000000012ba [ 25.852085] ---[ end trace 0000000000000000 ]--- The problem is that the .klp.rela.. relocations are processed after the module was already formed and mod->rw_copy was reset. However, the code in __write_relocate_add() calls module_writable_address() which translates the target address 'loc' still to 'loc + (mem->rw_copy - mem->base)', with mem->rw_copy now being 0. Fix the problem by returning directly 'loc' in module_writable_address() when the module is already formed. Function __write_relocate_add() knows to use text_poke() in such a case. Link: https://lkml.kernel.org/r/20250107153507.14733-1-petr.pavlu@suse.com Fixes: 0c133b1e78cd ("module: prepare to handle ROX allocations for text") Signed-off-by: Petr Pavlu Reported-by: Marek Maslanka Closes: https://lore.kernel.org/linux-modules/CAGcaFA2hdThQV6mjD_1_U+GNHThv84+MQvMWLgEuX+LVbAyDxg@mail.gmail.com/ Reviewed-by: Petr Mladek Tested-by: Petr Mladek Cc: Joe Lawrence Cc: Josh Poimboeuf Cc: Luis Chamberlain Cc: Mike Rapoport (Microsoft) Cc: Petr Mladek Signed-off-by: Andrew Morton

Merge tag 'soc-fixes-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-01-11T18:42:05Z

Pull SoC fixes from Arnd Bergmann: "Over the Christmas break a couple of devicetree fixes came in for Rockchips, Qualcomm and NXP/i.MX. These add some missing board specific properties, address build time warnings, The USB/TOG supoprt on X1 Elite regressed, so two earlier DT changes get reverted for now. Aside from the devicetree fixes, there is One build fix for the stm32 firewall driver, and a defconfig change to enable SPDIF support for i.MX" * tag 'soc-fixes-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: firewall: remove misplaced semicolon from stm32_firewall_get_firewall arm64: dts: rockchip: add hevc power domain clock to rk3328 arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S arm64: dts: qcom: sa8775p: fix the secure device bootup issue Revert "arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers" Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports" arm64: dts: qcom: x1e80100: Fix up BAR space size for PCIe6a Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports" ARM: dts: imxrt1050: Fix clocks for mmc ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF arm64: dts: imx95: correct the address length of netcmix_blk_ctrl arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B arm64: dts: rockchip: add reset-names for combphy on rk3568 arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions