user/sven/linux.git/include/linux, branch v6.2.7

PCI: Add SolidRun vendor ID

2023-03-17T07:58:02Z

[ Upstream commit db6c4dee4c104f50ed163af71c53bfdb878a8318 ] Add SolidRun vendor ID to pci_ids.h The vendor ID is used in 2 different source files, the SNET vDPA driver and PCI quirks. Signed-off-by: Alvaro Karsz Acked-by: Bjorn Helgaas Message-Id: <20230110165638.123745-2-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

bus: mhi: ep: Change state_lock to mutex

2023-03-17T07:57:49Z

[ Upstream commit 1ddc7618294084fff8d673217a9479550990ee84 ] state_lock, the spinlock type is meant to protect race against concurrent MHI state transitions. In mhi_ep_set_m0_state(), while the state_lock is being held, the channels are resumed in mhi_ep_resume_channels() if the previous state was M3. This causes sleeping in atomic bug, since mhi_ep_resume_channels() use mutex internally. Since the state_lock is supposed to be held throughout the state change, it is not ideal to drop the lock before calling mhi_ep_resume_channels(). So to fix this issue, let's change the type of state_lock to mutex. This would also allow holding the lock throughout all state transitions thereby avoiding any potential race. Cc: # 5.19 Fixes: e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels") Reported-by: Dan Carpenter Reviewed-by: Jeffrey Hugo Signed-off-by: Manivannan Sadhasivam Signed-off-by: Sasha Levin

HID: core: Provide new max_buffer_size attribute to over-ride the default

2023-03-17T07:57:48Z

commit b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream. Presently, when a report is processed, its proposed size, provided by the user of the API (as Report Size * Report Count) is compared against the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some low-level HID drivers allocate a reduced amount of memory to their buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending this check inadequate in some cases. In these circumstances, if the received report ends up being smaller than the proposed report size, the remainder of the buffer is zeroed. That is, the space between sizeof(csize) (size of the current report) and the rsize (size proposed i.e. Report Size * Report Count), which can be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset() shoots straight past the end of the buffer boundary and starts zeroing out in-use values, often resulting in calamity. This patch introduces a new variable into 'struct hid_ll_driver' where individual low-level drivers can over-ride the default maximum value of HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the interface. Signed-off-by: Lee Jones Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

PCI: Add ACS quirk for Wangxun NICs

2023-03-11T12:50:45Z

[ Upstream commit a2b9b123ccac913e9f9b80337d687a2fe786a634 ] Wangxun has verified there is no peer-to-peer between functions for the below selection of SFxxx, RP1000 and RP2000 NICS. They may be multi-function devices, but the hardware does not advertise ACS capability. Add an ACS quirk for these devices so the functions can be in independent IOMMU groups. Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com Signed-off-by: Mengyuan Lou Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

PCI: loongson: Prevent LS7A MRRS increases

2023-03-11T12:50:41Z

[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ] Except for isochronous-configured devices, software may set Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a read request with size greater than the completer's Max_Payload_Size (MPS), the completer is required to break the response into multiple completions. Instead of correctly responding with multiple completions to a large read request, some LS7A Root Ports respond with a Completer Abort. To prevent this, the MRRS must be limited to an implementation-specific value. The OS cannot detect that value, so rely on BIOS to configure MRRS before booting, and quirk the Root Ports so we never set an MRRS larger than that BIOS value for any downstream device. N.B. Hot-added devices are not configured by BIOS, and they power up with MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the LS7A limit is smaller, those hot-added devices may not work correctly, but per [1], hotplug is not supported with this chipset revision. [1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn [bhelgaas: commit log] Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884 Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

iommu: Remove deferred attach check from __iommu_detach_device()

2023-03-11T12:50:38Z

[ Upstream commit dd8a25c557e109f868430bd2e3e8f394cb40eaa7 ] At the current moment, __iommu_detach_device() is only called via call chains that are after the device driver is attached - eg via explicit attach APIs called by the device driver. Commit bd421264ed30 ("iommu: Fix deferred domain attachment") has removed deferred domain attachment check from __iommu_attach_device() path, so it should just unconditionally work in the __iommu_detach_device() path. It actually looks like a bug that we were blocking detach on these paths since the attach was unconditional and the caller is going to free the (probably) UNAMANGED domain once this returns. The only place we should be testing for deferred attach is during the initial point the dma device is linked to the group, and then again during the dma api calls. Signed-off-by: Jason Gunthorpe Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20230110025408.667767-5-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin

bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support

2023-03-11T12:50:38Z

[ Upstream commit 6c40624930c58529185a257380442547580ed837 ] The Data Capture and Compare(DCC) is a debugging tool that uses the bootconfig for configuring the register values during boot-time. Increase the max nodes supported by bootconfig to cater to the requirements of the Data Capture and Compare Driver. Link: https://lore.kernel.org/all/1674536682-18404-1-git-send-email-quic_schowdhu@quicinc.com/ Signed-off-by: Souradeep Chowdhury Acked-by: Masami Hiramatsu (Google) Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin

net: dsa: seville: ignore mscc-miim read errors from Lynx PCS

2023-03-11T12:50:33Z

[ Upstream commit 0322ef49c1ac6f0e2ef37b146c0bf8440873072c ] During the refactoring in the commit below, vsc9953_mdio_read() was replaced with mscc_miim_read(), which has one extra step: it checks for the MSCC_MIIM_DATA_ERROR bits before returning the result. On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they are organized in 2 groups. First group responds to MDIO addresses 4-7 because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double checked that these values are correctly set in the SERDES, as well as PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01. mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR As can be seen, the data in MIIM_DATA is still valid despite having the MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") was ignoring these bits, perhaps deliberately (although unbeknownst to me). This is an old IP and the hardware team cannot seem to be able to help me track down a plausible reason for these failures. I'll keep investigating, but in the meantime, this is a direct regression which must be restored to a working state. The only thing I can do is keep ignoring the errors as before. Fixes: b99658452355 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

netfilter: ctnetlink: make event listener tracking global

2023-03-11T12:50:30Z

[ Upstream commit fdf6491193e411087ae77bcbc6468e3e1cff99ed ] pernet tracking doesn't work correctly because other netns might have set NETLINK_LISTEN_ALL_NSID on its event socket. In this case its expected that events originating in other net namespaces are also received. Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID requires much more intrusive changes both in netlink and nfnetlink, f.e. adding a 'setsockopt' callback that lets nfnetlink know that the event socket entered (or left) ALL_NSID mode. Move to global tracking instead: if there is an event socket anywhere on the system, all net namespaces which have conntrack enabled and use autobind mode will allocate the ecache extension. netlink_has_listeners() returns false only if the given group has no subscribers in any net namespace, the 'net' argument passed to nfnetlink_has_listeners is only used to derive the protocol (nfnetlink), it has no other effect. For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event listeners a new netlink_has_net_listeners() is also needed. Fixes: 90d1daa45849 ("netfilter: conntrack: add nf_conntrack_events autodetect mode") Reported-by: Bryce Kahle Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

Revert "blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()"

2023-03-11T10:04:54Z

This reverts commit bfe46d2efe46c5c952f982e2ca94fe2ec5e58e2a which is commit f1c006f1c6850c14040f8337753a63119bba39b9 upstream. It is reported to cause problems, as only 2 of the 3 patch series were applied to the stable branches. Reported-by: Mike Cloaked Reported-by: Eric Biggers Cc: Yu Kuai Cc: Tejun Heo Cc: Christoph Hellwig Cc: Jens Axboe Cc: Sasha Levin Link: https://bugzilla.kernel.org/show_bug.cgi?id=217174 Link: https://lore.kernel.org/r/ZAuPkCn49urWBN5P@sol.localdomain Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman