user/sven/linux.git/include/linux, branch v6.2.8

fbdev: Fix incorrect page mapping clearance at fb_deferred_io_release()

2023-03-22T12:38:08Z

commit fe9ae05cfbe587dda724fcf537c00bc2f287da62 upstream. The recent fix for the deferred I/O by the commit 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices") caused a regression when the same fb device is opened/closed while it's being used. It resulted in a frozen screen even if something is redrawn there after the close. The breakage is because the patch was made under a wrong assumption of a single open; in the current code, fb_deferred_io_release() cleans up the page mapping of the pageref list and it calls cancel_delayed_work_sync() unconditionally, where both are no correct behavior for multiple opens. This patch adds a refcount for the opens of the device, and applies the cleanup only when all files get closed. As both fb_deferred_io_open() and _close() are called always in the fb_info lock (mutex), it's safe to use the normal int for the refcounting. Also, a useless BUG_ON() is dropped. Fixes: 3efc61d95259 ("fbdev: Fix invalid page access after closing deferred I/O devices") Cc: Signed-off-by: Takashi Iwai Reviewed-by: Patrik Jakobsson Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman

tracing: Make tracepoint lockdep check actually test something

2023-03-22T12:38:01Z

commit c2679254b9c9980d9045f0f722cf093a2b1f7590 upstream. A while ago where the trace events had the following: rcu_read_lock_sched_notrace(); rcu_dereference_sched(...); rcu_read_unlock_sched_notrace(); If the tracepoint is enabled, it could trigger RCU issues if called in the wrong place. And this warning was only triggered if lockdep was enabled. If the tracepoint was never enabled with lockdep, the bug would not be caught. To handle this, the above sequence was done when lockdep was enabled regardless if the tracepoint was enabled or not (although the always enabled code really didn't do anything, it would still trigger a warning). But a lot has changed since that lockdep code was added. One is, that sequence no longer triggers any warning. Another is, the tracepoint when enabled doesn't even do that sequence anymore. The main check we care about today is whether RCU is "watching" or not. So if lockdep is enabled, always check if rcu_is_watching() which will trigger a warning if it is not (tracepoints require RCU to be watching). Note, that old sequence did add a bit of overhead when lockdep was enabled, and with the latest kernel updates, would cause the system to slow down enough to trigger kernel "stalled" warnings. Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Dave Hansen Cc: "Paul E. McKenney" Cc: Mathieu Desnoyers Cc: Joel Fernandes Acked-by: Peter Zijlstra (Intel) Acked-by: Paul E. McKenney Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

interconnect: fix provider registration API

2023-03-22T12:37:59Z

commit eb59eca0d8ac15f8c1b7f1cd35999455a90292c0 upstream. The current interconnect provider interface is inherently racy as providers are expected to be added before being fully initialised. Specifically, nodes are currently not added and the provider data is not initialised until after registering the provider which can cause racing DT lookups to fail. Add a new provider API which will be used to fix up the interconnect drivers. The old API is reimplemented using the new interface and will be removed once all drivers have been fixed. Fixes: 11f1ceca7031 ("interconnect: Add generic on-chip interconnect API") Fixes: 87e3031b6fbd ("interconnect: Allow endpoints translation via DT") Cc: stable@vger.kernel.org # 5.1 Reviewed-by: Konrad Dybcio Signed-off-by: Johan Hovold Tested-by: Luca Ceresoli # i.MX8MP MSC SM2-MB-EP1 Board Link: https://lore.kernel.org/r/20230306075651.2449-4-johan+linaro@kernel.org Signed-off-by: Georgi Djakov Signed-off-by: Greg Kroah-Hartman

sh: intc: Avoid spurious sizeof-pointer-div warning

2023-03-22T12:37:56Z

[ Upstream commit 250870824c1cf199b032b1ef889c8e8d69d9123a ] GCC warns about the pattern sizeof(void*)/sizeof(void), as it looks like the abuse of a pattern to calculate the array size. This pattern appears in the unevaluated part of the ternary operator in _INTC_ARRAY if the parameter is NULL. The replacement uses an alternate approach to return 0 in case of NULL which does not generate the pattern sizeof(void*)/sizeof(void), but still emits the warning if _INTC_ARRAY is called with a nonarray parameter. This patch is required for successful compilation with -Werror enabled. The idea to use _Generic for type distinction is taken from Comment #7 in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108483 by Jakub Jelinek Signed-off-by: Michael Karcher Acked-by: Randy Dunlap # build-tested Link: https://lore.kernel.org/r/619fa552-c988-35e5-b1d7-fe256c46a272@mkarcher.dialup.fu-berlin.de Signed-off-by: John Paul Adrian Glaubitz Signed-off-by: Sasha Levin

block: count 'ios' and 'sectors' when io is done for bio-based device

2023-03-22T12:37:50Z

[ Upstream commit 5f27571382ca42daa3e3d40d1b252bf18c2b61d2 ] While using iostat for raid, I observed very strange 'await' occasionally, and turns out it's due to that 'ios' and 'sectors' is counted in bdev_start_io_acct(), while 'nsecs' is counted in bdev_end_io_acct(). I'm not sure why they are ccounted like that but I think this behaviour is obviously wrong because user will get wrong disk stats. Fix the problem by counting 'ios' and 'sectors' when io is done, like what rq-based device does. Fixes: 394ffa503bc4 ("blk: introduce generic io stat accounting help function") Signed-off-by: Yu Kuai Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

net: tunnels: annotate lockless accesses to dev->needed_headroom

2023-03-22T12:37:48Z

[ Upstream commit 4b397c06cb987935b1b097336532aa6b4210e091 ] IP tunnels can apparently update dev->needed_headroom in their xmit path. This patch takes care of three tunnels xmit, and also the core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA() helpers. More changes might be needed for completeness. BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1: ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 write to 0xffff88815b9da0ec of 2 bytes by task 2379 on cpu 0: ip_tunnel_xmit+0x1294/0x1730 net/ipv4/ip_tunnel.c:804 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip6_finish_output2+0x9bc/0xc50 net/ipv6/ip6_output.c:134 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x39a/0x4e0 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:302 [inline] mld_sendpack+0x438/0x6a0 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x519/0x7b0 net/ipv6/mcast.c:2653 process_one_work+0x3e6/0x750 kernel/workqueue.c:2390 worker_thread+0x5f2/0xa10 kernel/workqueue.c:2537 kthread+0x1ac/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 value changed: 0x0dd4 -> 0x0e14 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5fa354-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 Workqueue: mld mld_ifc_work Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit") Reported-by: syzbot Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20230310191109.2384387-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

block: do not reverse request order when flushing plug list

2023-03-22T12:37:48Z

[ Upstream commit 34e0a279a993debaff03158fc2fbf6a00c093643 ] Commit 26fed4ac4eab ("block: flush plug based on hardware and software queue order") changed flushing of plug list to submit requests one device at a time. However while doing that it also started using list_add_tail() instead of list_add() used previously thus effectively submitting requests in reverse order. Also when forming a rq_list with remaining requests (in case two or more devices are used), we effectively reverse the ordering of the plug list for each device we process. Submitting requests in reverse order has negative impact on performance for rotational disks (when BFQ is not in use). We observe 10-25% regression in random 4k write throughput, as well as ~20% regression in MariaDB OLTP benchmark on rotational storage on btrfs filesystem. Fix the problem by preserving ordering of the plug list when inserting requests into the queuelist as well as by appending to requeue_list instead of prepending to it. Fixes: 26fed4ac4eab ("block: flush plug based on hardware and software queue order") Signed-off-by: Jan Kara Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20230313093002.11756-1-jack@suse.cz Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

PCI: s390: Fix use-after-free of PCI resources with per-function hotplug

2023-03-22T12:37:46Z

[ Upstream commit ab909509850b27fd39b8ba99e44cda39dbc3858c ] On s390 PCI functions may be hotplugged individually even when they belong to a multi-function device. In particular on an SR-IOV device VFs may be removed and later re-added. In commit a50297cf8235 ("s390/pci: separate zbus creation from scanning") it was missed however that struct pci_bus and struct zpci_bus's resource list retained a reference to the PCI functions MMIO resources even though those resources are released and freed on hot-unplug. These stale resources may subsequently be claimed when the PCI function re-appears resulting in use-after-free. One idea of fixing this use-after-free in s390 specific code that was investigated was to simply keep resources around from the moment a PCI function first appeared until the whole virtual PCI bus created for a multi-function device disappears. The problem with this however is that due to the requirement of artificial MMIO addreesses (address cookies) extra logic is then needed to keep the address cookies compatible on re-plug. At the same time the MMIO resources semantically belong to the PCI function so tying their lifecycle to the function seems more logical. Instead a simpler approach is to remove the resources of an individually hot-unplugged PCI function from the PCI bus's resource list while keeping the resources of other PCI functions on the PCI bus untouched. This is done by introducing pci_bus_remove_resource() to remove an individual resource. Similarly the resource also needs to be removed from the struct zpci_bus's resource list. It turns out however, that there is really no need to add the MMIO resources to the struct zpci_bus's resource list at all and instead we can simply use the zpci_bar_struct's resource pointer directly. Fixes: a50297cf8235 ("s390/pci: separate zbus creation from scanning") Signed-off-by: Niklas Schnelle Reviewed-by: Matthew Rosato Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin

PCI: Add SolidRun vendor ID

2023-03-17T07:58:02Z

[ Upstream commit db6c4dee4c104f50ed163af71c53bfdb878a8318 ] Add SolidRun vendor ID to pci_ids.h The vendor ID is used in 2 different source files, the SNET vDPA driver and PCI quirks. Signed-off-by: Alvaro Karsz Acked-by: Bjorn Helgaas Message-Id: <20230110165638.123745-2-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

bus: mhi: ep: Change state_lock to mutex

2023-03-17T07:57:49Z

[ Upstream commit 1ddc7618294084fff8d673217a9479550990ee84 ] state_lock, the spinlock type is meant to protect race against concurrent MHI state transitions. In mhi_ep_set_m0_state(), while the state_lock is being held, the channels are resumed in mhi_ep_resume_channels() if the previous state was M3. This causes sleeping in atomic bug, since mhi_ep_resume_channels() use mutex internally. Since the state_lock is supposed to be held throughout the state change, it is not ideal to drop the lock before calling mhi_ep_resume_channels(). So to fix this issue, let's change the type of state_lock to mutex. This would also allow holding the lock throughout all state transitions thereby avoiding any potential race. Cc: # 5.19 Fixes: e4b7b5f0f30a ("bus: mhi: ep: Add support for suspending and resuming channels") Reported-by: Dan Carpenter Reviewed-by: Jeffrey Hugo Signed-off-by: Manivannan Sadhasivam Signed-off-by: Sasha Levin