user/sven/linux.git/include/linux, branch v6.9.4

inet: introduce dst_rtable() helper

2024-06-12T09:39:55Z

[ Upstream commit 05d6d492097c55f2d153fc3fd33cbe78e1e28e0a ] I added dst_rt6_info() in commit e8dfd42c17fa ("ipv6: introduce dst_rt6_info() helper") This patch does a similar change for IPv4. Instead of (struct rtable *)dst casts, we can use : #define dst_rtable(_ptr) \ container_of_const(_ptr, struct rtable, dst) Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper. Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Reviewed-by: Sabrina Dubroca Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com Signed-off-by: Jakub Kicinski Stable-dep-of: 92f1655aa2b2 ("net: fix __dst_negative_advice() race") Signed-off-by: Sasha Levin

netkit: Fix pkt_type override upon netkit pass verdict

2024-06-12T09:39:48Z

[ Upstream commit 3998d184267dfcff858aaa84d3de17429253629d ] When running Cilium connectivity test suite with netkit in L2 mode, we found that compared to tcx a few tests were failing which pushed traffic into an L7 proxy sitting in host namespace. The problem in particular is around the invocation of eth_type_trans() in netkit. In case of tcx, this is run before the tcx ingress is triggered inside host namespace and thus if the BPF program uses the bpf_skb_change_type() helper the newly set type is retained. However, in case of netkit, the late eth_type_trans() invocation overrides the earlier decision from the BPF program which eventually leads to the test failure. Instead of eth_type_trans(), split out the relevant parts, meaning, reset of mac header and call to eth_skb_pkt_type() before the BPF program is run in order to have the same behavior as with tcx, and refactor a small helper called eth_skb_pull_mac() which is run in case it's passed up the stack where the mac header must be pulled. With this all connectivity tests pass. Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device") Signed-off-by: Daniel Borkmann Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20240524163619.26001-2-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

net/mlx5: Fix MTMP register capability offset in MCAM register

2024-06-12T09:39:47Z

[ Upstream commit 1b9f86c6d53245dab087f1b2c05727b5982142ff ] The MTMP register (0x900a) capability offset is off-by-one, move it to the right place. Fixes: 1f507e80c700 ("net/mlx5: Expose NIC temperature via hardware monitoring kernel API") Signed-off-by: Gal Pressman Reviewed-by: Cosmin Ratiu Signed-off-by: Tariq Toukan Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

kasan, fortify: properly rename memintrinsics

2024-06-12T09:39:44Z

[ Upstream commit 2e577732e8d28b9183df701fb90cb7943aa4ed16 ] After commit 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions") and the follow-up fixes, with CONFIG_FORTIFY_SOURCE enabled, even though the compiler instruments meminstrinsics by generating calls to __asan/__hwasan_ prefixed functions, FORTIFY_SOURCE still uses uninstrumented memset/memmove/memcpy as the underlying functions. As a result, KASAN cannot detect bad accesses in memset/memmove/memcpy. This also makes KASAN tests corrupt kernel memory and cause crashes. To fix this, use __asan_/__hwasan_memset/memmove/memcpy as the underlying functions whenever appropriate. Do this only for the instrumented code (as indicated by __SANITIZE_ADDRESS__). Link: https://lkml.kernel.org/r/20240517130118.759301-1-andrey.konovalov@linux.dev Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions") Fixes: 51287dcb00cc ("kasan: emit different calls for instrumentable memintrinsics") Fixes: 36be5cba99f6 ("kasan: treat meminstrinsic as builtins in uninstrumented files") Signed-off-by: Andrey Konovalov Reported-by: Erhard Furtner Reported-by: Nico Pache Closes: https://lore.kernel.org/all/20240501144156.17e65021@outsider.home/ Reviewed-by: Marco Elver Tested-by: Nico Pache Acked-by: Nico Pache Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Daniel Axtens Cc: Dmitry Vyukov Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin

regulator: pickable ranges: don't always cache vsel

2024-06-12T09:39:39Z

[ Upstream commit f4f4276f985a5aac7b310a4ed040b47e275e7591 ] Some PMICs treat the vsel_reg same as apply-bit. Eg, when voltage range is changed, the new voltage setting is not taking effect until the vsel register is written. Add a flag 'range_applied_by_vsel' to the regulator desc to indicate this behaviour and to force the vsel value to be written to hardware if range was changed, even if the old selector was same as the new one. Signed-off-by: Matti Vaittinen Link: https://msgid.link/r/ZktCpcGZdgHWuN_L@fedora Signed-off-by: Mark Brown Stable-dep-of: 1ace99d7c7c4 ("regulator: tps6287x: Force writing VSEL bit") Signed-off-by: Sasha Levin

fpga: region: add owner module and take its refcount

2024-06-12T09:39:13Z

[ Upstream commit b7c0e1ecee403a43abc89eb3e75672b01ff2ece9 ] The current implementation of the fpga region assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the region during programming if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_region struct and use it to take the module's refcount. Modify the functions for registering a region to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the region as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a region without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga region. Fixes: 0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA") Suggested-by: Greg Kroah-Hartman Suggested-by: Xu Yilun Reviewed-by: Russ Weight Signed-off-by: Marco Pagani Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20240419083601.77403-1-marpagan@redhat.com Signed-off-by: Xu Yilun Signed-off-by: Sasha Levin

counter: linux/counter.h: fix Excess kernel-doc description warning

2024-06-12T09:39:07Z

[ Upstream commit 416bdb89605d960405178b9bf04df512d1ace1a3 ] Remove the @priv: line to prevent the kernel-doc warning: include/linux/counter.h:400: warning: Excess struct member 'priv' description in 'counter_device' Signed-off-by: Randy Dunlap Fixes: f2ee4759fb70 ("counter: remove old and now unused registration API") Link: https://lore.kernel.org/r/20231223050511.13849-1-rdunlap@infradead.org Signed-off-by: William Breathitt Gray Signed-off-by: Sasha Levin

fpga: bridge: add owner module and take its refcount

2024-06-12T09:39:06Z

[ Upstream commit 1da11f822042eb6ef4b6064dc048f157a7852529 ] The current implementation of the fpga bridge assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the bridge if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_bridge struct and use it to take the module's refcount. Modify the function for registering a bridge to take an additional owner module parameter and rename it to avoid conflicts. Use the old function name for a helper macro that automatically sets the module that registers the bridge as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a bridge without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga bridge. Other changes: opportunistically move put_device() from __fpga_bridge_get() to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since the bridge device is taken in these functions. Fixes: 21aeda950c5f ("fpga: add fpga bridge framework") Suggested-by: Greg Kroah-Hartman Suggested-by: Xu Yilun Reviewed-by: Russ Weight Signed-off-by: Marco Pagani Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20240322171839.233864-1-marpagan@redhat.com Signed-off-by: Xu Yilun Signed-off-by: Sasha Levin

fpga: manager: add owner module and take its refcount

2024-06-12T09:39:06Z

[ Upstream commit 4d4d2d4346857bf778fafaa97d6f76bb1663e3c9 ] The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_manager struct and use it to take the module's refcount. Modify the functions for registering the manager to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the manager as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a manager without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga manager. Other changes: opportunistically move put_device() from __fpga_mgr_get() to fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the manager device is taken in these functions. Fixes: 654ba4cc0f3e ("fpga manager: ensure lifetime with of_fpga_mgr_get") Suggested-by: Greg Kroah-Hartman Suggested-by: Xu Yilun Signed-off-by: Marco Pagani Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20240305192926.84886-1-marpagan@redhat.com Signed-off-by: Xu Yilun Signed-off-by: Sasha Levin

mm/ksm: fix ksm exec support for prctl

2024-05-30T07:44:56Z

[ Upstream commit 3a9e567ca45fb5280065283d10d9a11f0db61d2b ] Patch series "mm/ksm: fix ksm exec support for prctl", v4. commit 3c6f33b7273a ("mm/ksm: support fork/exec for prctl") inherits MMF_VM_MERGE_ANY flag when a task calls execve(). However, it doesn't create the mm_slot, so ksmd will not try to scan this task. The first patch fixes the issue. The second patch refactors to prepare for the third patch. The third patch extends the selftests of ksm to verfity the deduplication really happens after fork/exec inherits ths KSM setting. This patch (of 3): commit 3c6f33b7273a ("mm/ksm: support fork/exec for prctl") inherits MMF_VM_MERGE_ANY flag when a task calls execve(). Howerver, it doesn't create the mm_slot, so ksmd will not try to scan this task. To fix it, allocate and add the mm_slot to ksm_mm_head in __bprm_mm_init() when the mm has MMF_VM_MERGE_ANY flag. Link: https://lkml.kernel.org/r/20240328111010.1502191-1-tujinjiang@huawei.com Link: https://lkml.kernel.org/r/20240328111010.1502191-2-tujinjiang@huawei.com Fixes: 3c6f33b7273a ("mm/ksm: support fork/exec for prctl") Signed-off-by: Jinjiang Tu Reviewed-by: David Hildenbrand Cc: Johannes Weiner Cc: Kefeng Wang Cc: Nanyong Sun Cc: Rik van Riel Cc: Stefan Roesch Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin