user/sven/linux.git/include/net/addrconf.h, branch v4.8.5

ipv6: export several functions

2016-06-16T03:41:23Z

This patch exports some neighbour discovery functions which can be used by 6lowpan neighbour discovery ops functionality then. Cc: David S. Miller Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy Acked-by: YOSHIFUJI Hideaki Reviewed-by: Stefan Schmidt Signed-off-by: Alexander Aring Signed-off-by: David S. Miller

6lowpan: add 802.15.4 short addr slaac

2016-06-16T03:41:22Z

This patch adds the autoconfiguration if a valid 802.15.4 short address is available for 802.15.4 6LoWPAN interfaces. Cc: David S. Miller Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy Acked-by: Hannes Frederic Sowa Reviewed-by: Stefan Schmidt Signed-off-by: Alexander Aring Signed-off-by: David S. Miller

inet: refactor inet[6]_lookup functions to take skb

2016-02-11T08:54:14Z

This is a preliminary step to allow fast socket lookup of SO_REUSEPORT groups. Doing so with a BPF filter will require access to the skb in question. This change plumbs the skb (and offset to payload data) through the call stack to the listening socket lookup implementations where it will be used in a following patch. Signed-off-by: Craig Gallek Signed-off-by: David S. Miller

soreuseport: fast reuseport UDP socket selection

2016-01-05T03:49:58Z

Include a struct sock_reuseport instance when a UDP socket binds to a specific address for the first time with the reuseport flag set. When selecting a socket for an incoming UDP packet, use the information available in sock_reuseport if present. This required adding an additional field to the UDP source address equality function to differentiate between exact and wildcard matches. The original use case allowed wildcard matches when checking for existing port uses during bind. The new use case of adding a socket to a reuseport group requires exact address matching. Performance test (using a machine with 2 CPU sockets and a total of 48 cores): Create reuseport groups of varying size. Use one socket from this group per user thread (pinning each thread to a different core) calling recvmmsg in a tight loop. Record number of messages received per second while saturating a 10G link. 10 sockets: 18% increase (~2.8M -> 3.3M pkts/s) 20 sockets: 14% increase (~2.9M -> 3.3M pkts/s) 40 sockets: 13% increase (~3.0M -> 3.4M pkts/s) This work is based off a similar implementation written by Ying Cai for implementing policy-based reuseport selection. Signed-off-by: Craig Gallek Signed-off-by: David S. Miller

ipv6: remove unused neigh parameter from ndisc functions

2015-09-24T19:26:08Z

Since commit 12fd84f4383b1 ("ipv6: Remove unused neigh argument for icmp6_dst_alloc() and its callers."), the neigh parameter of ndisc_send_na and ndisc_send_ns is unused. CC: YOSHIFUJI Hideaki Signed-off-by: Jiri Benc Signed-off-by: David S. Miller

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2015-09-09T15:33:31Z

Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...

net/ipv6: Export addrconf_ifid_eui48

2015-08-30T22:08:49Z

For loopback purposes, RoCE devices should have a default GID in the port GID table, even when the interface is down. In order to do so, we use the IPv6 link local address which would have been genenrated for the related Ethernet netdevice when it goes up as a default GID. addrconf_ifid_eui48 is used to gernerate this address, export it. Signed-off-by: Matan Barak Signed-off-by: Doug Ledford

ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument

2015-07-31T22:21:30Z

This patch adds net argument to ipv6_stub_impl.ipv6_dst_lookup for use cases where sk is not available (like mpls). sk appears to be needed to get the namespace 'net' and is optional otherwise. This patch series changes ipv6_stub_impl.ipv6_dst_lookup to take net argument. sk remains optional. All callers of ipv6_stub_impl.ipv6_dst_lookup have been modified to pass net. I have modified them to use already available 'net' in the scope of the call. I can change them to sock_net(sk) to avoid any unintended change in behaviour if sock namespace is different. They dont seem to be from code inspection. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller

net: Export IGMP/MLD message validation code

2015-05-04T18:49:23Z

With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller

net: ipv6: allow explicitly choosing optimistic addresses

2015-02-05T23:37:41Z

RFC 4429 ("Optimistic DAD") states that optimistic addresses should be treated as deprecated addresses. From section 2.1: Unless noted otherwise, components of the IPv6 protocol stack should treat addresses in the Optimistic state equivalently to those in the Deprecated state, indicating that the address is available for use but should not be used if another suitable address is available. Optimistic addresses are indeed avoided when other addresses are available (i.e. at source address selection time), but they have not heretofore been available for things like explicit bind() and sendmsg() with struct in6_pktinfo, etc. This change makes optimistic addresses treated more like deprecated addresses than tentative ones. Signed-off-by: Erik Kline Acked-by: Lorenzo Colitti Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller