user/sven/linux.git/include/net/bluetooth, branch v6.6.55

Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED

2024-10-04T14:28:57Z

[ Upstream commit d47da6bd4cfa982fe903f33423b9e2ec541e9496 ] If HCI_CONN_MGMT_CONNECTED has been set then the event shall be HCI_CONN_MGMT_DISCONNECTED. Fixes: b644ba336997 ("Bluetooth: Update device_connected and device_found events to latest API") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once

2024-09-12T09:11:33Z

[ Upstream commit c898f6d7b093bd71e66569cd6797c87d4056f44b ] This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when already on hdev->cmd_sync_work context. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Bluetooth: hci_sync: Attempt to dequeue connection attempt

2024-09-12T09:11:33Z

[ Upstream commit 881559af5f5c545f6828e7c74d79813eb886d523 ] If connection is still queued/pending in the cmd_sync queue it means no command has been generated and it should be safe to just dequeue the callback when it is being aborted. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Bluetooth: hci_sync: Add helper functions to manipulate cmd_sync queue

2024-09-12T09:11:33Z

[ Upstream commit 505ea2b295929e7be2b4e1bc86ee31cb7862fb01 ] This adds functions to queue, dequeue and lookup into the cmd_sync list. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Bluetooth: hci_conn: Fix UAF Write in __hci_acl_create_connection_sync

2024-09-12T09:11:33Z

[ Upstream commit 5f641f03abccddd1a37233ff1b8e774b9ff1f4e8 ] This fixes the UAF on __hci_acl_create_connection_sync caused by connection abortion, it uses the same logic as to LE_LINK which uses hci_cmd_sync_cancel to prevent the callback to run if the connection is abort prematurely. Reported-by: syzbot+3f0a39be7a2035700868@syzkaller.appspotmail.com Fixes: 45340097ce6e ("Bluetooth: hci_conn: Only do ACL connections sequentially") Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Bluetooth: Remove pending ACL connection attempts

2024-09-12T09:11:33Z

[ Upstream commit 4aa42119d971603dc9e4d8cf4f53d5fcf082ea7d ] With the last commit we moved to using the hci_sync queue for "Create Connection" requests, removing the need for retrying the paging after finished/failed "Create Connection" requests and after the end of inquiries. hci_conn_check_pending() was used to trigger this retry, we can remove it now. Note that we can also remove the special handling for COMMAND_DISALLOWED errors in the completion handler of "Create Connection", because "Create Connection" requests are now always serialized. This is somewhat reverting commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect requests"). With this, the BT_CONNECT2 state of ACL hci_conn objects should now be back to meaning only one thing: That we received a "Connection Request" from another device (see hci_conn_request_evt), but the response to that is going to be deferred. Signed-off-by: Jonas Dreßler Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Bluetooth: hci_conn: Only do ACL connections sequentially

2024-09-12T09:11:33Z

[ Upstream commit 45340097ce6ea7e875674a5a7d24c95ecbc93ef9 ] Pretty much all bluetooth chipsets only support paging a single device at a time, and if they don't reject a secondary "Create Connection" request while another is still ongoing, they'll most likely serialize those requests in the firware. With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") we started adding some serialization of our own in case the adapter returns "Command Disallowed" HCI error. This commit was using the BT_CONNECT2 state for the serialization, this state is also used for a few more things (most notably to indicate we're waiting for an inquiry to cancel) and therefore a bit unreliable. Also not all BT firwares would respond with "Command Disallowed" on too many connection requests, some will also respond with "Hardware Failure" (BCM4378), and others will error out later and send a "Connect Complete" event with error "Rejected Limited Resources" (Marvell 88W8897). We can clean things up a bit and also make the serialization more reliable by using our hci_sync machinery to always do "Create Connection" requests in a sequential manner. This is very similar to what we're already doing for establishing LE connections, and it works well there. Note that this causes a test failure in mgmt-tester (test "Pair Device - Power off 1") because the hci_abort_conn_sync() changes the error we return on timeout of the "Create Connection". We'll fix this on the mgmt-tester side by adjusting the expected error for the test. Signed-off-by: Jonas Dreßler Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Bluetooth: hci_event: Use HCI error defines instead of magic values

2024-09-12T09:11:33Z

[ Upstream commit 79c0868ad65a8fc7cdfaa5f2b77a4b70d0b0ea16 ] We have error defines already, so let's use them. Signed-off-by: Jonas Dreßler Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"

2024-09-12T09:11:26Z

commit 532f8bcd1c2c4e8112f62e1922fd1703bc0ffce0 upstream. This reverts commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 which breaks compatibility with commands like: bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74 {0x0001} [hci0] Keys: 2 BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd) Key type: Authenticated key from P-256 (0x03) Central: 0x00 Encryption size: 16 Diversifier[2]: 0000 Randomizer[8]: 0000000000000000 Key[16]: 6ed96089bd9765be2f2c971b0b95f624 LE Address: D7:2A:DE:1E:73:A2 (Static) Key type: Unauthenticated key from P-256 (0x02) Central: 0x00 Encryption size: 16 Diversifier[2]: 0000 Randomizer[8]: 0000000000000000 Key[16]: 87dd2546ededda380ffcdc0a8faa4597 @ MGMT Event: Command Status (0x0002) plen 3 {0x0001} [hci0] Load Long Term Keys (0x0013) Status: Invalid Parameters (0x0d) Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/875 Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: Fix deadlock

2024-07-25T07:50:57Z

commit f1a8f402f13f94263cf349216c257b2985100927 upstream. This fixes the following deadlock introduced by 39a92a55be13 ("bluetooth/l2cap: sync sock recv cb and release") ============================================ WARNING: possible recursive locking detected 6.10.0-rc3-g4029dba6b6f1 #6823 Not tainted -------------------------------------------- kworker/u5:0/35 is trying to acquire lock: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_sock_recv_cb+0x44/0x1e0 but task is already holding lock: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_get_chan_by_scid+0xaf/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&chan->lock#2/1); lock(&chan->lock#2/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u5:0/35: #0: ffff888002b8a940 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x750/0x930 #1: ffff888002c67dd0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x44e/0x930 #2: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at: l2cap_get_chan_by_scid+0xaf/0xd0 To fix the original problem this introduces l2cap_chan_lock at l2cap_conless_channel to ensure that l2cap_sock_recv_cb is called with chan->lock held. Fixes: 89e856e124f9 ("bluetooth/l2cap: sync sock recv cb and release") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman