user/sven/linux.git/include/net/bluetooth, branch v6.9.8

Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ

2024-06-21T12:40:22Z

[ Upstream commit 806a5198c05987b748b50f3d0c0cfb3d417381a4 ] This removes the bogus check for max > hcon->le_conn_max_interval since the later is just the initial maximum conn interval not the maximum the stack could support which is really 3200=4000ms. In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values of the following fields in IXIT that would cause hci_check_conn_params to fail: TSPX_conn_update_int_min TSPX_conn_update_int_max TSPX_conn_update_peripheral_latency TSPX_conn_update_supervision_timeout Link: https://github.com/bluez/bluez/issues/847 Fixes: e4b019515f95 ("Bluetooth: Enforce validation on max value of connection interval") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated

2024-06-12T09:39:36Z

[ Upstream commit d356c924e7a3adbea1e3e4ff4e098bcd9b99a82d ] In case of a Broadcast Source that has PA enabled but no active BIG, a Broadcast Sink needs to establish PA sync and parse BASE from PA reports. This commit moves the allocation of a PA sync hcon from the BIGInfo advertising report event to the PA sync established event. After the first complete PA report, the hcon is notified to the ISO layer. A child socket is allocated and enqueued in the parent's accept queue. BIGInfo reports also need to be processed, to extract the encryption field and inform userspace. After the first BIGInfo report is received, the PA sync hcon is notified again to the ISO layer. Since a socket will be found this time, the socket state will transition to BT_CONNECTED and the userspace will be woken up using sk_state_change. Signed-off-by: Iulia Tanasescu Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: a5b862c6a221 ("Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()") Signed-off-by: Sasha Levin

Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1

2024-05-30T07:44:41Z

[ Upstream commit e77f43d531af41e9ce299eab10dcae8fa5dbc293 ] If hdev->le_num_of_adv_sets is set to 1 it means that only handle 0x00 can be used, but since the MGMT interface instances start from 1 (instance 0 means all instances in case of MGMT_OP_REMOVE_ADVERTISING) the code needs to map the instance to handle otherwise users will not be able to advertise as instance 1 would attempt to use handle 0x01. Fixes: 1d0fac2c38ed ("Bluetooth: Use controller sets when available") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_conn, hci_sync: Use __counted_by() to avoid -Wfamnae warnings

2024-05-30T07:44:41Z

[ Upstream commit c4585edf708edb5277a3cc4b8581ccb833f3307d ] Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are getting ready to enable it globally. So, use the `DEFINE_FLEX()` helper for multiple on-stack definitions of a flexible structure where the size of the flexible-array member is known at compile-time, and refactor the rest of the code, accordingly. Notice that, due to the use of `__counted_by()` in `struct hci_cp_le_create_cis`, the for loop in function `hci_cs_le_create_cis()` had to be modified. Once the index `i`, through which `cp->cis[i]` is accessed, falls in the interval [0, cp->num_cis), `cp->num_cis` cannot be decremented all the way down to zero while accessing `cp->cis[]`: net/bluetooth/hci_event.c:4310: 4310 for (i = 0; cp->num_cis; cp->num_cis--, i++) { ... 4314 handle = __le16_to_cpu(cp->cis[i].cis_handle); otherwise, only half (one iteration before `cp->num_cis == i`) or half plus one (one iteration before `cp->num_cis < i`) of the items in the array will be accessed before running into an out-of-bounds issue. So, in order to avoid this, set `cp->num_cis` to zero just after the for loop. Also, make use of `aux_num_cis` variable to update `cmd->num_cis` after a `list_for_each_entry_rcu()` loop. With these changes, fix the following warnings: net/bluetooth/hci_sync.c:1239:56: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] net/bluetooth/hci_sync.c:1415:51: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] net/bluetooth/hci_sync.c:1731:51: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] net/bluetooth/hci_sync.c:6497:45: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Link: https://github.com/KSPP/linux/issues/202 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1") Signed-off-by: Sasha Levin

Bluetooth: HCI: Remove HCI_AMP support

2024-05-30T07:44:41Z

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ] Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether. Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: ISO: Make iso_get_sock_listen generic

2024-05-30T07:44:40Z

[ Upstream commit 311527e9dafdcae0c5a20d62f4f84ad01b33b5f4 ] This makes iso_get_sock_listen more generic, to return matching socket in the state provided as argument. Signed-off-by: Iulia Tanasescu Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: a5b862c6a221 ("Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()") Signed-off-by: Sasha Levin

Bluetooth: compute LE flow credits based on recvbuf space

2024-05-30T07:44:40Z

[ Upstream commit ce60b9231b66710b6ee24042ded26efee120ecfc ] Previously LE flow credits were returned to the sender even if the socket's receive buffer was full. This meant that no back-pressure was applied to the sender, thus it continued to send data, resulting in data loss without any error being reported. Furthermore, the amount of credits was essentially fixed to a small amount, leading to reduced performance. This is fixed by computing the number of returned LE flow credits based on the estimated available space in the receive buffer of an L2CAP socket. Consequently, if the receive buffer is full, no credits are returned until the buffer is read and thus cleared by user-space. Since the computation of available receive buffer space can only be performed approximately (due to sk_buff overhead) and the receive buffer size may be changed by user-space after flow credits have been sent, superfluous received data is temporary stored within l2cap_pinfo. This is necessary because Bluetooth LE provides no retransmission mechanism once the data has been acked by the physical layer. If receive buffer space estimation is not possible at the moment, we fall back to providing credits for one full packet as before. This is currently the case during connection setup, when MPS is not yet available. Fixes: b1c325c23d75 ("Bluetooth: Implement returning of LE L2CAP credits") Signed-off-by: Sebastian Urban Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

2024-05-25T14:30:54Z

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream. l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz Signed-off-by: Sungwoo Kim Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE

2024-04-24T20:26:11Z

The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE. Fixes: c569242cd492 ("Bluetooth: hci_event: set the conn encrypted before conn establishes") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync

2024-04-24T20:26:08Z

The extended advertising reports do report the PHYs so this store then in hci_conn so it can be later used in hci_le_ext_create_conn_sync to narrow the PHYs to be scanned since the controller will also perform a scan having a smaller set of PHYs shall reduce the time it takes to find and connect peers. Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default") Signed-off-by: Luiz Augusto von Dentz